Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Optimization of misfit calcium cobaltite oxygen electrodes for solid oxide fuel cells through electrospinning processing
Allan J. M.
Araújo
*ab,
Itzhak I.
Maor
c,
Laura I. V.
Holz
ab,
Meirav
Mann-Lahav
c,
Vadim
Beilin
c,
Armin
Feldhoff
d,
Gideon S.
Grader
*ce and
Francisco J. A.
Loureiro
*ab
aDepartment of Mechanical Engineering, TEMA – Centre for Mechanical Technology and Automation, University of Aveiro, 3810-193 Aveiro, Portugal. E-mail: allan@ua.pt; allanjmaraujo@gmail.com; francisco.loureiro@ua.pt
bLASI – Intelligent Systems Associate Laboratory, Guimarães, 4800-058, Portugal
cWolfson Department of Chemical Engineering, Technion – Israel Institute of Technology, 3200003 Haifa, Israel. E-mail: grader@technion.ac.il
dInstitute of Physical Chemistry and Electrochemistry, Leibniz University Hannover, 30167 Hannover, Germany
eThe Nancy & Stephan Grand Technion Energy Program (GTEP), Technion – Israel Institute of Technology, 3200003 Haifa, Israel
First published on 2nd October 2024
Abstract
Correction for ‘Optimization of misfit calcium cobaltite oxygen electrodes for solid oxide fuel cells through electrospinning processing’ by Allan J. M. Araújo et al., J. Mater. Chem. A, 2024, https://doi.org/10.1039/D4TA04085F.
The authors regret a mistake in Fig. 2, where Fig. 2a and b were mistakenly interchanged with Fig. 2c and d. Please see the corrected figure here:
 | ||
| Fig. 2 Powder morphology obtained by Scanning Electron Microscopy (SEM) for the CCO compound produced by (a and b) SSR (synthesized at 910 °C for 12 h) and (c and d) ES (synthesized at 700 °C for 2 h). | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2024 |