Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

Correction: Superhydrophobic and mechanical properties enhanced the electrospinning film with a multiscale micro-nano structure for high-efficiency radiation cooling

Lijing Kong ab, Puqing Sun ab, Jincheng Liu ab, Yongxing Lin b, Chao Xiao b, Chao Bao b, Kang Zheng b, Meng Xue c, Xian Zhang b, Xianglan Liu *b and Xingyou Tian *b
aInstitutes of Physical Science and Information Technology, Anhui University, Hefei, P. R. China
bKey Lab of Photovoltaic and Energy Conservation Materials, Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei, China. E-mail: xlliu@issp.ac.cn; xytian@issp.ac.cn
cGuangdong Banggu Film Coatings Innovation Academy Co., Ltd, Nanxiong 512400, China

Received 18th March 2024 , Accepted 18th March 2024

First published on 28th March 2024


Abstract

Correction for ‘Superhydrophobic and mechanical properties enhanced the electrospinning film with a multiscale micro-nano structure for high-efficiency radiation cooling’ by Lijing Kong et al., J. Mater. Chem. A, 2024, https://doi.org/10.1039/D3TA07191J.


The authors regret that the published article contained some errors as follows:

• On Page 5 of the article, a reference to Fig. 4a and b was omitted from the end of the sentence which begins ‘The temperature drop was about 18 °C…’.

• Also on Page 5, the sentence beginning ‘With s white paper as a reference…’ contained the accidental insertion of the single letter s, which was a typographic error unremedied during proof corrections.

• An incorrect reference to Fig. S6d was made on Page 8 of the article in the sentence beginning ‘This action caused the fibers to be bonded…’. This sentence should have referred to Fig. S6c.

Additionally, some SI units featured on Page 7 need to be amended as follows:

• In section 2.5, the sentence beginning ‘A silicone rubber heating pad with a power of 100 W cm−2 …’ should read ‘A silicone rubber heating pad with a power of 100 W m−2…’

• In section 2.6, the first sentence refers to ‘q = 0, 3, 6, 9, and 12 W m−2 K’. This should have read ‘q = 0, 3, 6, 9, and 12 W m−2 K−1’.

• In section 2.7, the first sentence refers to ‘0.021 W m−1 K’. This should have read ‘0.021 W m−1 K−1’.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.


This journal is © The Royal Society of Chemistry 2024
Click here to see how this site uses Cookies. View our privacy policy here.