Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Flax fibre reinforced alginate poloxamer hydrogel: assessment of mechanical and 4D printing potential
Charles
de Kergariou
*a,
Graham J.
Day
bc,
Adam W.
Perriman
cd,
James P. K.
Armstrong
e and
Fabrizio
Scarpa
a
aBristol Composites Institute, School of Civil, Aerospace and Design Engineering (CADE), University of Bristol, University Walk, Bristol BS8 1TR, UK. E-mail: hl18503@bristol.ac.uk; charles.dekergariou@bristol.ac.uk
bBiomedical Engineering, James Watt School of Engineering, University of Glasgow, Glasgow, UK
cSchool of Cellular and Molecular Medicine, University of Bristol, BS8 1TD Bristol, UK
dResearch School of Chemistry and John Curtin School of Medical Research, Australian National University, Canberra ACT2601, Australia
eDepartment of Translational Health Sciences, Bristol Medical School, University of Bristol, BS1 3NY Bristol, UK
First published on 6th June 2024
Abstract
Correction for ‘Flax fibre reinforced alginate poloxamer hydrogel: assessment of mechanical and 4D printing potential’ by Charles de Kergariou et al., Soft Matter, 2024, 20, 4021–4034, https://doi.org/10.1039/D4SM00135D.
The authors regret that incorrect versions of eqn (4) and (5) were included in the original article. The correct versions of the equations are shown below.
Eqn (4):
ρ = m/(l × t × w)
Eqn (5):
CME = ((dwet − ddry)/ddry × 100)/((mwet − mdry)/mdry × 100)
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2024 |