Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Parameter investigation of an organic–inorganic hybrid resin for a 3D-printed microchannel heat exchanger
Sunjae
Lee
,
Amirreza
Mottafegh
and
Dong-Pyo
Kim
*
Center for Intelligent Microprocess of Pharmaceutical Synthesis, Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea. E-mail: dpkim@postech.ac.kr
First published on 2nd August 2024
Abstract
Correction for ‘Parameter investigation of an organic–inorganic hybrid resin for a 3D-printed microchannel heat exchanger’ by Sunjae Lee et al., React. Chem. Eng., 2024, 9, 2089–2097, https://doi.org/10.1039/D3RE00694H.
The authors regret an error in the grant information in the Acknowledgements section. The Acknowledgements section should read as follows:
This work was financially supported by the Institute of Civil-Military Technology Cooperation funded by the Defense Acquisition Program Administration and Ministry of Trade, Industry and Energy of Korean government (No. 21-CM-CE03).
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2024 |