Lulu
Wang†
a,
Cheng
Zeng†
a,
Jianing
Liang
a,
Chun
Zhai
*b,
Hao
Liu
c,
Tianyou
Zhai
a and
Huiqiao
Li
*ad
aState Key Laboratory of Materials Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China. E-mail: hqli@hust.edu.cn
bSchool of Materials Engineering, Changshu Institute of Technology; No. 99 South Third Ring Road (Donghu Campus), Changshu 215500, Jiangsu, China. E-mail: zczhaichun@clsg.edu.cn
cCentre for Clean Energy Technology, Faculty of Science, University of Technology Sydney, Broadway, Sydney, NSW 2007, Australia. E-mail: hao.liu@uts.edu.au
dResearch Institute of Huazhong University of Science and Technology in Shenzhen, Shenzhen 518063, China
First published on 15th March 2024
Correction for ‘In situ construction of a continuous ionic conductive coating for a high-performance Li3VO4 anode’ by Lulu Wang et al., Inorg. Chem. Front., 2024, 11, 1177–1185, https://doi.org/10.1039/D3QI02235H.
Furthermore, the authors regret that the list of author contributions in the original manuscript was incomplete. The complete list of author contributions is shown below.
Lulu Wang: conceptualization, data curation, investigation, validation, visualization, and writing – original draft; Cheng Zeng: writing – review & editing, visualization, and software; Jianing Liang: conceptualization; Chun Zhai: supervision, investigation, visualization, editing; Hao Liu: resources and revision; Tianyou Zhai: supervision, resources; Huiqiao Li: conceptualization, funding acquisition, resources, and supervision.
Finally, a footnote indicating that Lulu Wang and Cheng Zeng contributed equally to the work was missing from the original article. This is corrected herein.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
Footnote |
† These authors contributed equally to this work. |
This journal is © the Partner Organisations 2024 |