Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Kirigami-enabled stretchable laser-induced graphene heaters for wearable thermotherapy
Junyu
Chen
ab,
Yichao
Shi
a,
Binbin
Ying
ac,
Yajie
Hu
b,
Yan
Gao
b,
Sida
Luo
*b and
Xinyu
Liu
*ad
aDepartment of Mechanical and Industrial Engineering, University of Toronto, 5 King’s College Road, Toronto, Ontario M5S 3G8, Canada. E-mail: xyliu@mie.utoronto.ca
bSchool of Mechanical Engineering & Automation, Beihang University, No. 37 Xueyuan Road, Beijing, 100191, China. E-mail: s.luo@buaa.edu.cn
cDepartment of Mechanical Engineering, McGill University, 817 Sherbrooke Street West, Montreal, QC H3A 0C3, Canada
dInstitute of Biomedical Engineering, University of Toronto, 164 College Street, Toronto, ON M5S 3G9, Canada
First published on 30th April 2024
Abstract
Correction for ‘Kirigami-enabled stretchable laser-induced graphene heaters for wearable thermotherapy’ by Junyu Chen et al., Mater. Horiz., 2024, 11, 2010–2020, https://doi.org/10.1039/D3MH01884A.
The authors regret a number of errors which appear in the published article, which should be corrected as follows:
(1) In the Fig. 1 caption, “XRD (bottom) and Raman (top) spectra of the LIG” should read “XRD (top) and Raman spectra (bottom) of the LIG”; in addition, “Stress/resistance variation–strain relationship of the LIG” should read “Sheet resistance/tensile strength–laser power relationship of the LIG”.
(2) In the second paragraph of the section “Design and optimization of kirigami patterns”, the sentence beginning “The FEA data of average stress vs. strain…” should read “The experimental measurement of average stress vs. strain…”
(3) In the second paragraph of the section “Electrothermal characterization”, the sentence “We also recorded the heating and cooling profiles of the unidirectional and multidirectional heaters at different tensile strain levels (Fig. 4b and d).” should read “We also recorded the heating and cooling profiles of the unidirectional heater at different tensile strain levels (Fig. 4b).”
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2024 |