Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries
Xinliang
Ye
ab,
Chong
Wang
a,
Li
Wang
b,
Bingheng
Lu
b,
Fangliang
Gao
c and
Dan
Shao
*d
aSchool of Mechanical Engineering, Dongguan University of Technology, DongGuan 523808, China. E-mail: yxl5194@163.com; wangchong@dgut.edu.cn
bMicro- and Nano-Technology Research Center, State Key Laboratory for Manufacturing Systems Engineering (Xi’an Jiaotong University), Xi’an 710049, China. E-mail: wanglime@mail.xjtu.edu.cn; bhlu@mail.xjtu.edu.cn
cGuangdong Engineering Technology Research Center of Low Carbon and Advanced Energy Materials, Institute of Semiconductors, South China Normal University, Guangzhou 510631, China. E-mail: gaofl@m.scnu.edu.cn
dGuangdong Provincial Key Laboratory of Battery Safety, Guangzhou Institute of Energy Testing, Guangzhou, Guangdong 511447, China. E-mail: shaod1005@163.com
First published on 1st December 2022
Abstract
Correction for ‘DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries’ by Xinliang Ye et al., Chem. Commun., 2022, 58, 7642–7645, https://doi.org/10.1039/D2CC01626E.
The authors regret that there was an error in affiliation b and that no corresponding author was indicated in the original article. Dan Shao is the corresponding author, and affiliation b has been corrected as indicated here.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2022 |