Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Ultra-smooth and robust graphene-based hybrid anode for high-performance flexible organic light-emitting diodes
Zhikun
Zhang
ab,
Lianlian
Xia
c,
Lizhao
Liu
d,
Yuwen
Chen
e,
Zuozhi
Wang
ab,
Wei
Wang
ab,
Dongge
Ma
*e and
Zhaoping
Liu
*ab
aCAS Engineering Laboratory for Graphene, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Zhejiang 315201, P. R. China. E-mail: liuzp@nimte.ac.cn
bKey Laboratory of Graphene Technologies and Applications of Zhejinag Province, CAS Engineering Laboratory for Graphene, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Zhejiang 315201, P. R. China
cState Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, P. R. China
dKey Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), Dalian University of Technology, Dalian 116024, P. R. China
eInstitute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, P. R. China. E-mail: msdgma@scut.edu.cn
First published on 23rd September 2021
Abstract
Correction for ‘Ultra-smooth and robust graphene-based hybrid anode for high-performance flexible organic light-emitting diodes’ by Zhikun Zhang et al., J. Mater. Chem. C, 2021, 9, 2106–2114, DOI: 10.1039/D0TC05213B.
The authors regret an error in Fig. 4 of the published article – the units of the vertical axes in Fig. 4(c) and (e) should be A cm−2 and not mA cm−2. The corrected version of Fig. 4 is shown below. Please note that this error does not affect any of the results and conclusions reported in the article.
 | ||
| Fig. 4 Device structure and performance of green OLEDs with different anodes. (a) Device structure, (b) energy level diagram, (c and e) current–voltage characteristics, (d and f) current efficiency and power efficiency versus luminance characteristics of OLEDs with 5L-graphene/pristine PET, and 5L-graphene/smoothed PET as anodes. The insets show the corresponding flexible green OLEDs with different graphene anodes at low brightness. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2021 |