Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Indirect fabrication of versatile 3D microfluidic device by a rotating plate combined 3D printing system
Dong-Heon Ha†
a,
Dong-Hyeon Ko†b,
Jin-Oh Kim†c,
Do Jin Imd,
Byoung Soo Kima,
Soo-Young Parke,
Steve Parkc,
Dong-Pyo Kim‡
*b and
Dong-Woo Cho‡*a
aDepartment of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, South Korea. E-mail: dwcho@postech.ac.kr
bDepartment of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, South Korea. E-mail: dpkim@postech.ac.kr
cDepartment of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, Korea
dDepartment of Chemical Engineering, Pukyong National University, Busan, South Korea
eDepartment of Polymer Science and Engineering, Kyungpook National University, Daegu, South Korea
First published on 5th December 2018
Abstract
Correction for ‘Indirect fabrication of versatile 3D microfluidic device by a rotating plate combined 3D printing system’ by Dong-Heon Ha et al., RSC Adv., 2018, 8, 37693–37699.
The authors regret that the name of one of the authors (Jin-Oh Kim) was shown incorrectly in the original article. In addition, the author contributions were incorrectly given. The corrected author list and contributions are as shown above.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
Footnotes |
| † Dong-Heon Ha, Dong-Hyeon Ko and Jin-Oh Kim equally contributed to this work. |
| ‡ Dong-Woo Cho and Dong-Pyo Kim equally contributed to this work. |
| This journal is © The Royal Society of Chemistry 2018 |