Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

Correction: A three-dimensional metal grid mesh as a practical alternative to ITO

Sungwoo Jang a, Woo-Bin Jung a, Cheolgyu Kim b, Phillip Won c, Sang-Gil Lee a, Kyeong Min Cho a, Ming Liang Jin a, Cheng Jin An a, Hwan-Jin Jeon a, Seung Hwan Ko c, Taek-Soo Kim b and Hee-Tae Jung *ad
aDepartment of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 305-701, Republic of Korea. E-mail: heetae@kaist.ac.kr
bDepartment of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 305-701, Republic of Korea
cDepartment of Mechanical Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul, 151-742, Republic of Korea
dKAIST Institute for the NanoCentury, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 305-701, Republic of Korea

Received 31st August 2018 , Accepted 31st August 2018

First published on 10th September 2018


Abstract

Correction for ‘A three-dimensional metal grid mesh as a practical alternative to ITO’ by Sungwoo Jang et al., Nanoscale, 2016, 8, 14257–14263.


The name of the co-author Cheolgyu Kim was spelt incorrectly in the published manuscript as ‘Choelgyu Kim’. The corrected spelling is therefore given in the author list shown above.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.


This journal is © The Royal Society of Chemistry 2018