Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C7RA90103H
(Correction)
RSC Adv., 2017, 7, 51950-51950
Correction: Optimizing supercapacitor electrode density: achieving the energy of organic electrolytes with the power of aqueous electrolytes
M. D. Merrill,
E. Montalvo,
P. G. Campbell,
Y. M. Wang,
M. Stadermann,
T. F. Baumann,
J. Biener and
M. A. Worsley*
Lawrence Livermore National Laboratory, Physical and Life Sciences Directorate, Livermore, California, USA. E-mail: worsley1@llnl.gov
Received
1st November 2017
, Accepted 1st November 2017
First published on 9th November 2017
Abstract
Correction for ‘Optimizing supercapacitor electrode density: achieving the energy of organic electrolytes with the power of aqueous electrolytes’ by M. D. Merrill et al., RSC Adv., 2014, 4, 42942–42946.
An error was present in Fig. 3 of the published manuscript; the correct version is shown below:
 | ||
| Fig. 1 Ragone plots for symmetric, two electrode setups. (A) Gravimetric energy and power per electrode mass for various thickness/density combinations in 5 M KOH electrolyte. (B) Gravimetric energy and power per system (electrode + electrolyte) mass for various thickness/density combinations in 5 M KOH electrolyte. (C) Volumetric energy and power per system (electrode + electrolyte) mass for various thickness/density combinations in 5 M KOH electrolyte. (D) Gravimetric energy and power comparison for the GMA electrodes in aqueous KOH and 6 M LiCl + 1 M CsCl electrolytes (values are per system mass unless noted with *). | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2017 |