Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C7RA90036H
(Correction)
RSC Adv., 2017, 7, 14322-14322
Correction: Ultrasensitive and in situ DNA detection in various pH environments based on a microfiber with a graphene oxide linking layer
Yunyun Huang,
Bo Yu,
Tuan Guo and
Bai-Ou Guan*
Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Photonics Technology, Jinan University, Guangzhou 210632, China. E-mail: tguanbo@jnu.edu.cn
Received
28th February 2017
, Accepted 28th February 2017
First published on 6th March 2017
Abstract
Correction for ‘Ultrasensitive and in situ DNA detection in various pH environments based on a microfiber with a graphene oxide linking layer’ by Yunyun Huang et al., RSC Adv., 2017, 7, 13177–13183.
The authors regret that a unit in Fig. 1 in the original article is incorrect. The corrected figure, in which ‘10 nm’ has been corrected to ‘10 μm’, is presented herein.
 | ||
| Fig. 1 Schematic geometry of the silica microfiber interferometer. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2017 |