Cedric J.
Stress
,
Pascal J.
Schmidt
and
Dennis. G.
Gillingham
*
Department of Chemistry, University of Basel, St. Johanns-Ring 19, 4056, Basel, Switzerland. E-mail: dennis.gillingham@unibas.ch
First published on 15th February 2016
We use kinetic data, photophysical properties, and mechanistic analyses to compare recently developed high-rate constant oxime and hydrazone formations. We show that when Schiff base formation between aldehydes and arylhydrazines is carried out with an appropriately positioned boron atom, then aromatic B–N heterocycles form irreversibly. These consist of an extended aromatic structure amenable to the tailoring of specific properties such as reaction rate and fluorescence. The reactions work best in neutral aqueous buffer and can be designed to be fluorogenic – properties which are particularly interesting in bioconjugation.
In the search for an irreversible variant of an oxime or hydrazone condensation we turned to hydrazines as α-effect nucleophiles. The inspiration for this choice came from two reports, published more than fifty years ago, demonstrating that with hydrazines the initial Schiff base adducts (structure 3 in Fig. 1) undergo a secondary intramolecular cyclization to deliver aromatic, boron-substituted isoquinoline derivatives, which were stable to prolonged boiling in acid or base.13,14 These reports on 4,3-borazaroisoquinolines (BIQs) were largely forgotten until the 1990s when reports from Groziak15 structurally confirmed and extended16 the earlier findings. The Groziak group also proposed these materials as the basis of unique pharmacophores.17,18 Indeed several BIQs have shown growth inhibitory activity against different types of bacteria.18–20 In a very recent development, the Bane lab has shown that BIQ formation works well under aqueous conditions and could be used for bioconjugation.21 In this work we present a mechanistic analysis and comparison of oxime, hydrazone, and BIQ formation (i.e. structures 1, 2, 3, and 4 in Fig. 1). The data should serve as a guidebook to potential users for determining which conjugation is best suited to their specific application. Furthermore, we demonstrate that when the aromatic system of the BIQ is extended and appropriately substituted to deliver a push–pull system, then a fluorogenic reaction is possible. Turn-on fluorescence is important in cellular assays since it reduces background during imaging and can remove the need for washing steps.22,23
![]() | ||
Fig. 1 Boron accelerates the formation of Schiff bases of type 1, 2, and 3 from carbonyl compounds and α-effect amines; 3, however, engages in a secondary reaction that leads to the stable BIQ 4. |
![]() | ||
Fig. 2 The prototype boron assisted oxime condensation (a), our working mechanistic hypothesis (b) and substrate variations that provide some insight on the mechanism (c & d). |
In our previous report we found that aldoximes are reversible but took several hours until the equilibrium was reached.7 To further investigate the influence of substituents on the stability and reversibility of oximes we treated ketoxime 14 with a five-fold excess of 2-formylphenylboronic acid (2-FPBA). NMR analysis indicated rapid equilibration and a strong energetic preference for the aldoxime: after the first measurement (15 min) about 60% of the ketoxime was converted to the corresponding aldoxime, and after 75 minutes only the aldoxime was observed (compare time points in Fig. 3). A substantial reduction in transition state energy for formyl versus acetyl Schiff bases has also been seen by others9 and is likely a result of the preference for the ketoximine nitrogen to bind to the boron in an iminoboronate interaction, thus activating it for hydrolysis; X-Ray crystallography indicates no such interaction in the ground-state for the aldoxime (see B in Fig. 3). We speculate that the energetic reason for this difference is related to Raine's hypothesis that the basicity of the nitrogen of the Schiff base is decisive in determining stability of oximes and hydrazones. The additional σ-donation of the methyl substituent should render its nitrogen more basic (compare X = Me to X = H in panel c, Fig. 3) and therefore more amenable to protonation or interaction with a Lewis acid.
In the search for an irreversible bioconjugation we turned to arylhydrazines. Although hydrazones (such as 16 in Fig. 4) are known to be more labile than oximes,8 reports from the 1960s showed that hydrazones with a boronic acid group in ortho position undergo an intramolecular cyclization reaction to 4,3-borazaroisoquinolines (BIQ).13,14 The Bane lab has very recently described that this reaction could offer a powerful tool in aqueous conjugations.21 We present here our own exploration of the reaction, which is fully consistent with the reports of the Bane lab. We also include additional mechanistic data, new substrates, and the development of a fluorogenic process.
We began by examining the conjugation of compound 15 with phenylhydrazine in pH 7.2 phosphate buffer. UV analysis could not provide the time resolution to determine the rate of hydrazone (16) formation but a lower bound of >103 M−1 s−1 can be established. The cyclization step to deliver BIQ 17 was slower, with a rate constant of 2.5 × 10−3 M−1 s−1 (see Fig. 4). The rates were measured at 10 μM concentration by following hydrazone formation and disappearance at 340 nm. As expected, acidification increased the reaction rates, whereas under more basic conditions the transformations proceeded more slowly (see ESI†). We also found that polar aprotic solvents like DMF and MeCN drastically slowed down the BIQ formation and led to undesired oxidation of the boronic acid leaving a hydroxy substituted hydrazone. As a general rule we found that higher percentages of water increased the reaction rates even when the starting materials and products were poorly soluble. Complex media like human serum or millimolar concentrations of glutathione (see also ref. 21) only slightly affected the reaction rates (see ESI page 26†).
The relatively slow BIQ formation allowed us to employ NMR to follow the cyclization and to examine whether it was reversible. As shown in Fig. 5 arylhydrazone 16 cyclizes to BIQ 17 in aqueous phosphate buffer over the course of several hours – a rate that is consistent with the UV measurements. If purified product 17 is then treated with 2-FPBA (see panel B in Fig. 5), no change in the amount of 17 or 5 is observed over 24 h. If 2-FPBA is added to 16 before cyclization is complete then small amounts of the oxime product are observed, indicating that arylhydrazone formation is reversible.
BIQ formation leads to an unusual aromatic scaffold whose optical properties might be amenable to tuning. Particularly interesting is the possibility that the de novo construction of the ring might allow turn-on fluorescence. The modularity of the reaction allowed us to quickly access a variety of substituted BIQs and study their absorbance and fluorescence. In general all tested BIQs showed some fluorescence at excitation wavelengths <300 nm, but most with an efficiency that would not be useful in practice (see panel A in Fig. 6 for structures and the ESI page 30† for absorbance and fluorescence spectra).
![]() | ||
Fig. 6 Representative examples of BIQs synthesized (see the ESI† for additional examples and information). |
Two thoughts guided the design of our next series of BIQs: We considered the B-OH group as a potential fluorescence quencher and we also thought that additional annulation might red-shift the absorption wavelength. Accordingly, we synthesized another series of substituted BIQs (see panel b in Fig. 6) with an additional O-substituted five-membered ring (see as well the ESI† for an example of a six-membered ring). In general the alkoxy or hydroxyl substitutions did not lead to substantial shifts in absorbance maximum or improvements in fluorescence efficiency. Substitution with the electron rich dimethylamino group in the boronic acid component, however, delivered a good blue fluorophore (27 in Fig. 6). As shown in Fig. 7, the starting boronic acid, 28, was poorly fluorescent with a maximum emission at 502 nm. BIQ formation led to a more than five-fold increase in fluorescence and an improvement in fluorescent quantum yield (ϕ = 0.39 for 27versus 0.28 for 28). Although improvements still need to be made for this fluorophore to service areas of unmet need in chemical biology, the fact that a fluorogenic reaction could be arrived at from a simple two-step optimization with less than fifteen compounds bodes well for future optimization.
Footnote |
† Electronic supplementary information (ESI) available. CCDC 1448404. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c6ob00168h |
This journal is © The Royal Society of Chemistry 2016 |