Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Roll-to-roll infrared (IR) drying and sintering of an inkjet-printed silver nanoparticle ink within 1 second
Enrico
Sowade
a,
Hyunkyoo
Kang
*a,
Kalyan Y.
Mitra
a,
Oliver J.
Weiß
b,
Jürgen
Weber
b and
Reinhard R.
Baumann
ac
aDigital Printing and Imaging Technology, Institute for Printing and Media Technology, Reichenhainer Str. 70, 09126 Chemnitz, Germany. E-mail: hyunkyoo@gmail.com
bDevelopment Infrared Process Technology, Heraeus Noblelight, Reinhard-Heraeus-Ring 7, 63801 Kleinostheim, Germany
cDepartment Printed Functionalities, Fraunhofer Research Institute for Electronic Nano Systems (ENAS), Technologie-Campus 3, 09126 Chemnitz, Germany
First published on 13th October 2015
Abstract
Correction for ‘Roll-to-roll infrared (IR) drying and sintering of an inkjet-printed silver nanoparticle ink within 1 second’ by Enrico Sowade et al., J. Mater. Chem. C, 2015, DOI: 10.1039/c5tc02291f.
The reference citations that appear in Fig. 1 are incorrect. The updated version of this figure with correct reference citations is provided below.
 | ||
| Fig. 1 A comparison of estimated post-processing time and the percentage of bulk Ag conductivity for printed Ag nanoparticle layers using different combinations of drying and sintering methods based on literature sources. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2015 |