Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: A 3D porous interconnected NaVPO4F/C network: preparation and performance for Na-ion batteries
Maowen
Xu
*ab,
Chuan-Jun
Cheng
ab,
Qiang-Qiang
Sun
ab,
Shu-Juan
Bao
ab,
Yu-Bin
Niu
ab,
Hong
He
ab,
Yutao
Li
c and
Jie
Song
c
aInstitute for Clean Energy & Advanced Materials, Faculty of Materials and Energy, Southwest University, Chongqing 400715, P. R. China. E-mail: xumaowen@swu.edu.cn
bChongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, P. R. China
cTexas Materials Institute, University of Texas at Austin, Texas 78712, USA
First published on 29th June 2015
Abstract
Correction for ‘A 3D porous interconnected NaVPO4F/C network: preparation and performance for Na-ion batteries’ by Maowen Xu et al., RSC Adv., 2015, 5, 40065–40069.
The authors apologise for the errors in Fig. 5 in the original article. The correct Fig. 5 is shown below.
 | ||
| Fig. 5 The electrochemical properties of NaVPO4F precursor and NaVPO4F sintered at 750 °C and 800 °C: (a) cyclic voltammograms at a scan rate of 0.1 mV s−1; (b) the typical first cycle profiles of charge–discharge curves at 0.1 C; (c) performance at various rates from 0.1 C to 1 C; (d) cycle performances at 0.1 C. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2015 |