Issue 8, 2015

Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4

Abstract

Electricity storage is needed on an unprecedented scale to sustain the ongoing transition of electricity generation from fossil fuels to intermittent renewable energy sources like wind and solar power. Today pumped hydro is the only commercially viable large-scale electricity storage technology, but unfortunately it is limited to mountainous regions and therefore difficult to expand. Emerging technologies like adiabatic compressed air energy storage (ACAES) or storage using conventional power-to-gas (P2G) technology combined with underground gas storage can be more widely deployed, but unfortunately for long-term to seasonal periods these technologies are either very expensive or provide a very low round-trip efficiency. Here we describe a novel storage method combining recent advances in reversible solid oxide electrochemical cells with sub-surface storage of CO2 and CH4, thereby enabling large-scale electricity storage with a round-trip efficiency exceeding 70% and an estimated storage cost around 3 ¢ kW−1 h−1, i.e., comparable to pumped hydro and much better than previously proposed technologies.

Graphical abstract: Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
13 May 2015
Accepted
29 Jun 2015
First published
06 Jul 2015

Energy Environ. Sci., 2015,8, 2471-2479

Author version available

Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4

S. H. Jensen, C. Graves, M. Mogensen, C. Wendel, R. Braun, G. Hughes, Z. Gao and S. A. Barnett, Energy Environ. Sci., 2015, 8, 2471 DOI: 10.1039/C5EE01485A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements