Daeil
Kim
a,
Junyeong
Yun
a,
Geumbee
Lee
b and
Jeong
Sook Ha
*ab
aDepartment of Chemical and Biological Engineering, Korea University, 136-701, Seoul, Republic of Korea
bKU-KIST Graduate School of Converging Science and Technology, Korea University, 136-701, Seoul, Republic of Korea. E-mail: jeongsha@korea.ac.kr
First published on 3rd November 2014
Correction for ‘Fabrication of high performance flexible micro-supercapacitor arrays with hybrid electrodes of MWNT/V2O5 nanowires integrated with a SnO2 nanowire UV sensor’ by Daeil Kim et al., Nanoscale, 2014, 6, 12034–12041.
Page 12036, left column, line 23, “0.56 mF” should be replaced with “140 μF”.
Page 12036, left column, line 28, “” should be replaced with “
”. At line 29, “measured current” should be replaced with “measured discharge current”.
Page 12037, left column, “Fig. 2(b)” should be replaced with the new one which has the corrected capacitance values of the y-axis.
Even though the evaluation of the total capacitance values was done incorrectly, all the other calculation of stack capacitance, energy density, and power density are reconfirmed to be correct as they are. Therefore, this correction of the total capacitance values does not affect the conclusion of our paper related to the electrochemical performance of the fabricated MSC.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
This journal is © The Royal Society of Chemistry 2014 |