Jump to main content
Jump to site search

Issue 47, 2020
Previous Article Next Article

Adhesion of a tape loop

Author affiliations

Abstract

In this work, we revisit experimentally and theoretically the mechanics of a tape loop. Using primarily elastic materials (polydimethylsiloxane, PDMS, or polycarbonate, PC) and confocal microscopy, we monitor the shape as well as the applied forces during an entire cycle of compression and retraction of a half-loop compressed between parallel glass plates. We observe distinct differences in film shape during the cycle; points of equal applied force or equal plate separation differ in shape upon compression or retraction. To model the adhesion cycle in its entirety, we adapt the ‘Sticky Elastica’ of [T. J. W. Wagner et al., Soft Matter, 2013, 9, 1025–1030] to the tape loop geometry, which allows a complete analytical description of both the force balance and the film shape. We show that under compression the system is generally not sensitive to interfacial interactions, whereas in the limit of large separation of the confining parallel plates during retraction the system is well described by the peel model. Ultimately, we apply this understanding to the measurement of the energy release rate of a wide range of different cross-linker ratio PDMS elastomer half-loops in contact with glass. Finally, we show how the model illuminates an incredibly simple adhesion measurement technique, which only requires a ruler to perform.

Graphical abstract: Adhesion of a tape loop

Back to tab navigation

Supplementary files

Article information


Submitted
20 Aug 2020
Accepted
02 Nov 2020
First published
02 Nov 2020

Soft Matter, 2020,16, 10611-10619
Article type
Paper

Adhesion of a tape loop

T. Elder, T. Twohig, H. Singh and A. B. Croll, Soft Matter, 2020, 16, 10611 DOI: 10.1039/D0SM01516D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.


Social activity

Search articles by author

Spotlight

Advertisements