Issue 99, 2014

Humidity-dependent piezoelectric output of Al–ZnO nanowire nanogenerator and its applications as a self-powered active humidity sensor

Abstract

Al-doped ZnO nanowire arrays are used to fabricate a piezoelectric nanogenerator, and its output is significantly dependent on the humidity in the environment, showing its applications as a self-powered active humidity sensor. The piezoelectric output of the device acts as both the power source and response signal to the humidity.

Graphical abstract: Humidity-dependent piezoelectric output of Al–ZnO nanowire nanogenerator and its applications as a self-powered active humidity sensor

Supplementary files

Article information

Article type
Communication
Submitted
11 Sep 2014
Accepted
21 Oct 2014
First published
23 Oct 2014

RSC Adv., 2014,4, 56211-56215

Humidity-dependent piezoelectric output of Al–ZnO nanowire nanogenerator and its applications as a self-powered active humidity sensor

W. Zang, W. Wang, D. Zhu, L. Xing and X. Xue, RSC Adv., 2014, 4, 56211 DOI: 10.1039/C4RA10216A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements