Issue 16, 2016

Extremely fast Au–Ag alloy–dealloy associated reversible plasmonic modifications in SiO2 films

Abstract

We report a unique alloy–dealloy phenomenon of Au–Ag nanoparticles inside SiO2 films with clear plasmonic modifications between the absorptions of Ag (∼415 nm) and Au (∼524 nm). An Au–Ag (1 : 1) alloy nanoparticles (average size: 4.5 nm)-incorporated transparent SiO2 film is prepared on a glass substrate using mercaptosuccinic acid capped Au nanoparticles and Ag+ co-doped hybrid sol. The Au–Ag (1 : 1) alloy-originated plasmon band (465 ± 1 nm) is gradually red-shifted with increasing temperature (50 to 400 °C) due to the partial oxidation of Ag, causing a systematic modification of the alloy composition. The 1 : 1 alloy, however, reverted very quickly, showing its original plasmon band in the presence of a small amount of H2 due to re-reduction of the oxidized Ag and instantaneous re-alloying. During the Ag oxidation, the Si–OH groups associated with the embedded SiO2 matrix exchange Ag+ to form Ag–O–Si linkages; they subsequently release Ag very quickly in H2 and dissolve again into the parent alloy. As a result, the films exhibit reversible and rapid optical changes while cycling in 0.1% to 1% H2 (balance Ar) and air in the temperature range from 50 to 400 °C. This unique reversible alloy–dealloy phenomenon clearly demonstrates the mechanism of plasmonic modification associated with Au–Ag nanoparticles embedded in the sol–gel SiO2 film matrix.

Graphical abstract: Extremely fast Au–Ag alloy–dealloy associated reversible plasmonic modifications in SiO2 films

Supplementary files

Article information

Article type
Paper
Submitted
30 Sep 2015
Accepted
24 Mar 2016
First published
24 Mar 2016

J. Mater. Chem. C, 2016,4, 3571-3580

Extremely fast Au–Ag alloy–dealloy associated reversible plasmonic modifications in SiO2 films

S. Pramanik, S. Chattopadhyay, J. K. Das, U. Manju and G. De, J. Mater. Chem. C, 2016, 4, 3571 DOI: 10.1039/C5TC03123K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements