Issue 9, 2020

Overview of sterilization methods for UHMWPE through surface analysis

Abstract

The sterilization process is essential for the use of biomaterials in the human body in order to avoid contamination. However, the effect of such required pretreatment on the surface must be also evaluated since some modifications may cause a shortened lifespan of this material or changes in properties of interest. Moreover, improvements in sterilization techniques may even enhance properties while the surface is cleaned. The thorough understanding of the effect that the sterilization processes have on the surface of ultra-high molecular weight polyethylene (UHMWPE), widely used biomaterial in orthopedic joint prosthesis, is, therefore, a key study since some modifications during traditional sterilization could be a major problem for patients who have undergone arthroplasty surgery. This work brings a comprehensive study on sterilization techniques already available and extensively used (hydrogen peroxide plasma, ethylene oxide, steam autoclave) and a comparison with results obtained for recently developed cold plasma-based sterilization technique. The effects of the processes have been extensively compiled by data obtained for thermal analysis, nanoscale wear and friction, physicochemical, topographical, wettability, and in vitro cytotoxicity experiments. An overall outlook on the set of samples points out to cold plasma oxidation (CPO) being an adequate and potential candidate for improving wear resistance, while maintaining thermal stability and a restrained adhesion of L929 cells, provoked by its hydrophilicity and larger surface area.

Graphical abstract: Overview of sterilization methods for UHMWPE through surface analysis

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
07 Okt 2020
Accepted
09 Okt 2020
First published
13 Okt 2020
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2020,1, 3243-3255

Overview of sterilization methods for UHMWPE through surface analysis

M. Machado Rodrigues, E. K. Kerstner Baldin, C. P. Fontoura, L. M. Leidens, R. A. Barbieri, R. Frassini, C. de Fraga Malfatti, M. Roesch-Ely, C. A. Figueroa and C. Aguzzoli, Mater. Adv., 2020, 1, 3243 DOI: 10.1039/D0MA00772B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements