Issue 11, 2020

Extraction of gallium from simulated Bayer process liquor by Kelex 100 dissolved in ionic liquids

Abstract

Two 1,2,3-triazolium ionic liquid diluents were evaluated for the extraction of gallium from spent Bayer process liquor by Kelex® 100. The first of these is a hydrophobic ionic liquid with a low water content, which allows the extraction of gallium directly from untreated Bayer process liquor. The second is based on a hydrophilic ionic liquid and which forms an aqueous biphasic system with concentrated salt solutions. The aqueous biphasic system homogenizes upon cooling, which allows homogeneous liquid–liquid extraction of gallium from carbonated Bayer process liquors. The influence of the ionic liquids on the extraction kinetics, mechanism, thermodynamics and selectivity is investigated. Stripping was examined from both systems and their potential for industrialization is discussed. Ionic liquids are shown to beneficially influence the extraction process from thermodynamic and kinetic perspectives. They are therefore promising to solve the issues which have thus far prevented the industrial application of resource-efficient solvent extraction techniques for the recovery of gallium from spent Bayer process liquor.

Graphical abstract: Extraction of gallium from simulated Bayer process liquor by Kelex 100 dissolved in ionic liquids

Supplementary files

Article information

Article type
Paper
Submitted
03 дек 2019
Accepted
21 фев 2020
First published
21 фев 2020

Dalton Trans., 2020,49, 3532-3544

Extraction of gallium from simulated Bayer process liquor by Kelex 100 dissolved in ionic liquids

S. Raiguel, W. Dehaen and K. Binnemans, Dalton Trans., 2020, 49, 3532 DOI: 10.1039/C9DT04623B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements