Issue 4, 2018

Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%

Abstract

Non-fullerene polymer solar cells (PSCs) attract more attention due to the constantly refreshed power conversion efficiency (PCE) based on the versatile non-fullerene acceptors. In this work, PCEs of 10.51% and 11.02% were obtained for two kinds of non-fullerene PSC with IDT6CN-M or ITCPTC as the acceptor and PBDB-T as the donor. ITCPTC has a relatively narrow bandgap and a high absorption coefficient compared with IDT6CN-M, which explains well the relatively large short-circuit current density of 17.44 mA cm−2 for the ITCPTC based binary PSCs. Meanwhile, the IDT6CN-M based binary PSCs exhibit a relatively high fill factor (FF) of 75.3% and an open-circuit voltage of 0.915 V. A PCE of 11.92% and a FF of 76.5% were achieved for the ternary PSCs with 60 wt% ITCPTC content in the acceptors, which should be attributed to the enhanced photon harvesting and their good compatibility for a synergistic improvement of exciton utilization and charge transport in the ternary active layers. The FF of 76.5% is among the top values of ternary non-fullerene PSCs.

Graphical abstract: Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%

Supplementary files

Article information

Article type
Paper
Submitted
22 yan 2018
Accepted
16 fev 2018
First published
16 fev 2018

Energy Environ. Sci., 2018,11, 841-849

Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%

M. Zhang, W. Gao, F. Zhang, Y. Mi, W. Wang, Q. An, J. Wang, X. Ma, J. Miao, Z. Hu, X. Liu, J. Zhang and C. Yang, Energy Environ. Sci., 2018, 11, 841 DOI: 10.1039/C8EE00215K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements