Issue 5, 2023

Electrodeposition of activated carbon on Ni foam for monolithic catalysts and intensification of hydrogenation performance in a micropacked bed

Abstract

Activated carbon (AC) is coated on Ni foam (NF) via an electrodeposition (ED) method to develop Pd/AC/NF monolithic catalysts, and the hydrogenation of α-methylstyrene (AMS) is adopted in a micropacked bed (MPB) to evaluate the catalyst performance. Compared with the suspension circulation (SC) method, the ED method can provide thinner AC coatings with layered structures. The active component Pd proves to be uniform on the coatings. These thin coatings improve the contact efficiency between the AMS and Pd sites and reduce the shedding of catalysts. The catalysts by ED exhibit better external mass transfer performance, activity, and stability compared with the catalysts by SC, and the maximum difference in the activity is 15.2%. The decrease in the activity of the catalysts by ED is 2.1% for 72 h. The ED method has practicability for fabricating monolithic catalysts with good hydrogenation and mass transfer performance in the MPB.

Graphical abstract: Electrodeposition of activated carbon on Ni foam for monolithic catalysts and intensification of hydrogenation performance in a micropacked bed

Supplementary files

Article information

Article type
Paper
Submitted
09 ربيع الثاني 1444
Accepted
24 جمادى الثانية 1444
First published
25 جمادى الثانية 1444

React. Chem. Eng., 2023,8, 1023-1031

Electrodeposition of activated carbon on Ni foam for monolithic catalysts and intensification of hydrogenation performance in a micropacked bed

C. Ma, W. Liu, F. Lou, C. Zhang and J. Zhang, React. Chem. Eng., 2023, 8, 1023 DOI: 10.1039/D2RE00470D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements