Correction: Electrowetting without external voltage using paint-on electrodes

Collin B. Eaker; Ishan D. Joshipura; Logan R. Maxwell; Jason Heikenfeld; Michael D. Dickey

doi:10.1039/C7LC90029E

View PDF VersionPrevious ArticleNext Article

Open Access Article

This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

DOI: 10.1039/C7LC90029E (Correction) Lab Chip, 2017, 17, 1359-1359

Correction: Electrowetting without external voltage using paint-on electrodes

Collin B. Eaker ^a, Ishan D. Joshipura ^a, Logan R. Maxwell ^a, Jason Heikenfeld ^b and Michael D. Dickey *^a
^aDepartment of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695-7905, USA. E-mail: mddickey@ncsu.edu
^bDepartment of Electrical Engineering and Computing Systems, University of Cincinnati, Cincinnati, OH 45221-0030, USA

Received 8th March 2017 , Accepted 8th March 2017

First published on 16th March 2017

Abstract

Correction for ‘Electrowetting without external voltage using paint-on electrodes’ by Collin B. Eaker et al., Lab Chip, 2017, DOI: 10.1039/c6lc01500j.

The ‘square’ term is missing from eqn (1) in this article. The correct version of eqn (1) is shown below:


	(1)

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.