Total synthesis of (−)-20-epiuleinevia stereocontrolled one-pot asymmetric azaelectrocyclization followed by novel 1,4-addition reaction

Taku Sakaguchi , Shohei Kobayashi and Shigeo Katsumura *
School of Science and Technology, Kwansei Gakuin University, Gakuen 2-1, Sanda, Hyogo 669-1337, Japan. E-mail: katsumura@kwansei.ac.jp; Fax: +81 (79) 565-9077; Tel: +81 (79) 565-8314

Received 26th August 2010 , Accepted 6th October 2010

First published on 17th November 2010


Abstract

The first asymmetric total synthesis of an indole alkaloid, (−)-20-epiuleine, containing the 2,3,4-trisubstituted piperidine core, was achieved using a stereocontrolled one-pot asymmetric 6π-azaelectrocyclization followed by a stereoselective 1,4-addition reaction of the unsaturated ester with a Grignard reagent resulting from the novel neighboring participation of the hydroxyl group in cis-aminoindanol as a chiral nitrogen source.


Introduction

Uleine (1), 20-epiuleine (2), dasycarpidone (3) and 20-epidasycarpidone (4) are four related members of the Strychnos-type indole alkaloids, which were principally isolated from Aspidosperma sp (Fig. 1.).1 These indole alkaloids lack the two-carbon chain from tryptophan. Although a number of synthetic efforts for the racemic 20-epiuleine (2) and epidasycarpidone (4) along with uleine (1) and dasycarpidone (3) were reported in the literature,2,3 only a few asymmetric syntheses of these indole alkaloids have been reported.4,5 The structural feature of these alkaloids is the 2-aza-bicyclo[3,3,1]nonane skeleton, which has been constructed from the 3-(2-piperidyl)indole derivative 5 by an acid-catalyzed cyclization followed by dehydration (Scheme 1).3 The subject, therefore, is how to efficiently synthesize the optically homogeneous 2-indolyl-3-ethyl-4-carbonyl piperidine compound such as 5, which is classified as a 2,3,4-trisubstituted piperidine skeleton and was obtained in the dl-form by the 1,4-addition of the unsaturated ketone 6 (Scheme 1).3c,3d

          Strychnos-type indole alkaloids.
Fig. 1 Strychnos-type indole alkaloids.

Synthetic strategy of 20-epiuleine.
Scheme 1 Synthetic strategy of 20-epiuleine.

Previously, we reported the formal synthesis of the optically active 20-epiuleine (2) utilizing the step-wise asymmetric 6π-azaelectrocyclization, which was developed as a synthetic strategy for substituted piperidines.5 This asymmetric azaelectrocyclization includes highly controlling the stereochemistry at the second position of the constructed tetrahydropyridine derivative, such as 7, resulting from a kinetically controlled torquoselective 6π-azaelectrocyclization of a conformationally flexible linear azatriene, such as 8, prepared from cis-aminoindanol derivative 9 and dienal 10.5 In that formal synthesis, although we synthesized the optically homogeneous 2-indolyl-4-acyl-1,2,5,6-tetrahydropyridine 6, which was identical to the synthetic intermediate of (dl)-20-epiuleine reported by Husson's group, the transformation to the corresponding chiral 2,3,4-trisubstituted piperidine derivative 5 was not realized. Thus, the real procedure for the construction of the chiral 2,3,4-trisubstituted piperidine framework has not been yet established.

Most recently, in order to establish asymmetric 6π-azaelectrocyclization as a new strategy for alkaloid synthesis, we realized a one-pot protocol, which enabled the facile and highly stereoselective preparation of chiral 2,4-disubstituted- and 2,4,5-trisubstituted-1,2,5,6-tetrahydropyridine derivatives such as 13 under thermodynamic control (Scheme 2).6 Based on the developed protocol, we achieved the stereoselective total synthesis of (−)-dendroprimine,7 which possesses a chiral 2,4,6-trisubstituted piperidine nucleus, and (−)-corynantheidol,8 which has a chiral 2,4,5-trisubstituted piperidine structural unit. In this paper, we describe in detail the stereoselective total synthesis of (−)-20-epiuleine, which consists of a 2,3,4-trisubstituted piperidine structural unit having an indole nucleusvia the one-pot asymmetric azaelectrocyclization followed by the unique 1,4-addition reaction of the unsaturated ester with Grignard reagents resulting from the novel neighboring participation of the hydroxyl group in cis-aminoindanol, which was utilized as a chiral nitrogen source.



          Alkaloid synthesis
          via 6π-azaelectrocyclization.
Scheme 2 Alkaloid synthesis via 6π-azaelectrocyclization.

Results and Discussion

Usual 1,4-additon reaction of unsaturated methyl ketone with cuprate

As previously reported, the tetracyclic aminoacetal derivative 7 was stereoselectively synthesized by the one-pot asymmetric 6π-azaelectrocyclization (Scheme 3).6 Thus, the cis-aminoindanol derivative (−)-9, trisubstituted vinyl iodide 14 and MS4A were stirred in DMF at room temperature. After checking the consumption of 14 by TLC, indolyl vinyl stannane 15, Pd2(dba)3, tri(2-furyl)phosphine and LiCl were added, and the resulting mixture was heated at 80 °C for 2 h to produce the desired aminoacetal 7 in 75% yield resulting from the successive Migita-Stille coupling, 1-azatriene formation, 6π-azaelectrocyclization and aminoacetal formation. The stereoselectivity at the second position and the total yield were better than those obtained by the previously developed stepwise procedure (75% yield and >16[thin space (1/6-em)]:[thin space (1/6-em)]1 stereoselectivity for the one-pot protocol vs. 62% yield and 10[thin space (1/6-em)]:[thin space (1/6-em)]1 stereoselectivity for the stepwise method).5,6 The transformation from 7 to methyl ketone 6 through 16 was accomplished by the sequence of DIBAL-H reduction, lead tetraacetate oxidation in the presence of n-propylamine, reductive N-methylation (HCHO, NaBH3CN in CH3CN), MnO2 oxidation, methylation with MeLi, hydrolysis of the N-tosyl group in the indole ring and then DMP oxidation as previously reported.5 We thus obtained the optically active methyl ketone derivative 6, which was a key synthetic intermediate of (±)-20-epiuleine as reported by Husson's group. We then attempted the 1,4-addition reaction of (−)-6 under the reaction conditions described in the literature.3c After a detailed investigation of the reaction conditions, we obtained the desired 2,3,4-trisubstituted piperidine compound 5 in 48% yield using excess reagents of ethylmagnesium bromide and copper(I) chloride in a ratio of 2.5[thin space (1/6-em)]:[thin space (1/6-em)]1 in ether. When the one to one ratio of ethylmagnesium bromide and copper(I) was used, we did not obtained the desired product and recovered the starting materials. As the solvent of this 1,4-addition reaction, the yield in ether was rather better than in THF. Although we obtained the derived 5, this 1,4-addition reaction was troublesome and sometimes not reproducible. The yield varied from 48% to 13% under the same conditions employed. We then examined another method for this 1,4-addition reaction.
Synthesis of 20-epiuleine through unsaturated methyl ketone 6.
Scheme 3 Synthesis of 20-epiuleine through unsaturated methyl ketone 6.

Novel 1,4-addition reaction of the unsaturated ester with the Grignard reagent to produce 2,3,4-trisubstituted piperidine derivatives; Improved synthesis of (−)-20-epiuleine

Since it was preferable to construct the 2,3,4-trisubstituted piperidine nucleus of 20-epiuleine at the earlier stage, we attempted the 1,4-addition reaction of the aminoacetal derivative 7, which was easily obtained by the one-pot asymmetric azaelectrocyclization of the three components.6 Surprisingly, the treatment of 7 with an excess amount of the Grignard reagent at 0 °C spontaneously provided the dialkylated ester 17 as a mixture of stereoisomers, and no 1,4-addition product 18 was detected in the mass spectrum (Scheme 4). Even though one equivalent of the Grignard reagent was used, the dialkylated product 17 was admitted as the major product in the mass spectra along with the starting material 7. We postulated that the 1,4-addition of an ethyl group to the unsaturated ester moiety would occur after the alkylation at the acetal moiety proceeded. We then decided to attempt the 1,4-addition reaction for the aminoindanol derivative 20, which would be obtained from the aminoacetal 7 by chemoselective reduction, with ethylmagnesium bromide. The reduction of 7 with LAH or DIBAL-H gave the corresponding diol 19, and Red-Al® in toluene chemoselectively reduced the ester group to give the primary alcohol as a mixture of olefin isomers, while the saturated derivative gave the corresponding primary alcohol.6 Fortunately, we found that the treatment of 7 with NaBH4 in the presence of BF3·OEt2 in THF at 0 °C successfully and quantitatively provided the desired alcohol 20.9 After obtaining 20, we attempted the 1,4-addition reaction.

            Alkylation and reduction of 7.
Scheme 4 Alkylation and reduction of 7.

The reaction of 20 with an excess amount of ethylmagnesium bromide in ether at 0 °C for 20 min cleanly proceeded to expectedly afford the 1,4-addition product 21 in 95% yield as a mixture of stereoisomers, which could not be separately isolated at this stage (Scheme 5). Removal of the indanol moiety in 21 with lead tetraacetate under the established condition6 produced the 2,3,4-trisubstituted piperidine 22a and 22b in 24% and 71% yields, respectively, which were cleanly separated from each other. The stereochemistry of 22b was determined as 2β, 3α, 4β in the piperidine ring and that of 22a as 2β, 3α, 4α by a detailed analysis of the NMR data. Although various attempts of isomerization at the ester group of 22a (t-BuOK in BuOH, DBU in DMF, etc.) were not successful, isomerization of the corresponding methyl ketone 5 was successful in literature,3c,d and hence the present synthesis can be regarded as the stereocontrolled one. On the contrary, the reaction of compound 23, which was derived from the hydroxyl compound 20 with TBSCl and imidazole, gave tertiary alcohol 24 with ethylmagnesium bromide resulting from the addition of an ethyl group to the ester group. Thus, the secondary hydroxyl group of the aminoindanol moiety is essential for the 1,4-addition reaction.



            1,4-Addition reaction of unsaturated ester.
Scheme 5 1,4-Addition reaction of unsaturated ester.

A plausible mechanism is shown in Fig. 2. The highly stereoselective introduction of an ethyl group at the β-position of the ester group in 20 could be explained by assuming that the coordination of the Grignard reagent with the OMgBr group prepared from the Grignard reagent and the hydroxyl group in the cis-aminoindanol moiety was generated during the alkylation process,10 and then the ethyl group attacked from the opposite direction of the indole group as shown in structure 26.


Plausible mechanism of 1,4-addition reaction.
Fig. 2 Plausible mechanism of 1,4-addition reaction.

In order to investigate the generality of this novel 1,4-addition reaction assisted by the neighboring hydroxyl group, we applied the reaction to a phenyl derivative 27a instead of an N-tosyl indole compound as a representative compound (Table 1). As expected, the reaction under the same conditions gave the corresponding 1,4-addition product 29a through 28a in 82% yield with the single stereoisomer at the ethyl group and the similar stereoselectivity at the ester group. The thiophene derivative 27b6 gave 29b through 28b in 75% yield and a rather better stereoselectivity at the ester group. On the contrary, attempts of the 1,4-addition reaction of the corresponding methyl ketone derivative 27c, which was easily derived from amide 27d, gave the 1,2-addition product 30c along with 1,4-addition product 29c in 26% and 41% yields, respectively. In the case of the amide derivative 27d, which was obtained by the same one-pot azaelectrocyclization using the corresponding Weinreb amide instead of 14 in Scheme 3 (see experimental), the reaction gave a complex mixture and 29d was not isolated. Thus, the unsaturated ester group was appropriate for the desired 1,4-addition reaction.

Entry 27 29 R1 R2 Yield Ratio α[thin space (1/6-em)]:[thin space (1/6-em)]β By-product
1 20 22 CO2Et 95% 1[thin space (1/6-em)]:[thin space (1/6-em)]3.0  
2 27a 29a CO2Et 82% 1[thin space (1/6-em)]:[thin space (1/6-em)]2.7  
3 27b 29b CO2Et 75% 1[thin space (1/6-em)]:[thin space (1/6-em)]3.8  
4 27c 29c 41% 1[thin space (1/6-em)]:[thin space (1/6-em)]2.2



Synthesis of (−)-20-epiuleine.
Scheme 6 Synthesis of (−)-20-epiuleine.

Total synthesis of (−)-20-epiuleine by the one-pot asymmetric 6π-azaelectrocyclization followed by the novel 1,4-addition

To achieve the total synthesis of 20-epiuleine (Scheme 6), the obtained 22b was transformed into the methyl ketone 5. Thus, the reductive N-methylation of a mixture of 22b and 22a was performed by treatment with a 37% aqueous HCHO solution and sodium cyanoborohydride in acetonitrile to produce 31b and 31a as a mixture of easily separable epimers. Each of them was transformed into the aldehyde 32b and 32a by DIBAL-H reduction followed by Swern oxidation. At this stage, the undesired isomer 32a was epimerized to the desired 32b by a DBU treatment in THF at room temperature. The obtained aldehyde 32b was transformed into the methyl ketone 5 through 33 by methylation with MeLi, Swern oxidation and then hydrolysis of the N-tosyl group of the indole moiety with Cs2CO3 in THF and MeOH (3[thin space (1/6-em)]:[thin space (1/6-em)]1). Finally, the treatment of 5 with p-TsOH in chloroform completed the total synthesis of (−)-20-epiuleine (2) in 25% yield. The spectral data (1H NMR, 13C NMR, IR, HRMS) were in good agreement with those of the natural product. The value of [α]D of the synthesized compound was −30.1 (CHCl3, c 0.9), which is reported for the first time.

Summary

In summary, we achieved the first asymmetric total synthesis of (−)-20-epiuleine (2) using a three-component one-pot 6π-azaelectrocyclization. The construction of the 2,3,4-trisubstituted piperidine as the core structure of the indole alkaloid was established by utilizing the highly stereoselective 1,4-addition reaction only with the Grignard reagent. This unique 1,4-addition reaction was due to the novel neighboring participation of the hydroxyl group of the characteristic aminoindanol moiety, which was employed as a chiral nitrogen source. The total yield of the first route via Husson's enone obtained from the three components in a one-pot reaction was 1.3% for 10 steps, while that of the second route was 5.0% for 11 steps.

Experimental

General Procedure

All commercially available reagents were used without further purification. All solvents were used after distillation. Tetrahydrofuran, diethyl ether and toluene were refluxed over and distilled from sodium. Dichloromethane was refluxed over and distilled from P2O5. Dimethylformamide (DMF) was distilled from CaH2. Preparative separation was usually performed by column chromatography on silica gel. The 1H NMR and 13C NMR spectra were recorded using a 400 MHz spectrometer, and chemical shifts were represented as δ-values relative to the internal standard TMS. The IR spectra were recorded by a FT-IR spectrometer. The high-resolution mass spectra (HRMS) were measured by a ESI-TOF MS.
(2S,3S,4R)-(−)-3-Ethyl-4-(acetyl)-N-methyl-2-(indol-3-yl)-piperidine (5). To a suspension of copper(I) chloride (148 mg, 1.49 mmol) in ether (1.0 ml) was added ethyl magnesium bromide (1.25 ml, 3.74 mmol, 3.0 M in ether) at 0 °C. After the mixture was stirred for 1 h at this temperature, a solution of 6 (22 mg, 1.20 mmol) in ether (5.0 ml) was added. After the mixture was stirred at this temperature for 30 min, saturated aqueous NH4Cl and NaHCO3 solutions were successively added and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 9% methanol in chloroform) gave 5 (12 mg, 48%) as a yellow amorphoussolid: [α]22D −22.1 (c 1.1, CHCl3); IR (KBr disk, cm−1) 2928, 2793, 1714, 1458, 1136, 1067, 733; 1H NMR (400 MHz, CDCl3) δ 8.14–8.26 (br s, 1H), 7.76–7.88 (br s, 1H), 7.37 (d, 1H, J = 8.0 Hz), 7.15 (m, 3H), 3.13 (ddd, 1H, J = 11.7, 3.2, 3.2 Hz), 3.03 (d, 1H, J = 8.7 Hz), 2.59 (ddd, 1H, J = 11.5, 11.5, 4.6 Hz), 2.40–2.28 (br s, 1H), 2.16–2.24 (m, 4H), 2.02 (s, 3H), 1.84–1.99 (m, 2H), 1.03–1.20 (m, 2H), 0.62 (t, 3H, J = 7.6 Hz); 13C NMR (100 MHz, CDCl3) δ 211.8, 136.3, 122.5, 122.0, 119.4, 116.4, 111.1, 56.5, 54.2, 44.6, 29.2, 28.2, 23.1, 9.2; ESI HRMSm/z calcd for C18H24N2O1 (M+H)+ 285.1967, found 285.1977.
Ethyl (2S)-1-[(1S,2R)-2-hydroxyl-7-isopropylindan-1-yl]-2-(N-p-toluenesulfonylindol-3-yl)-1,2,5,6-tetrahydropyridine-4-carboxylate (20). To a solution of aminoacetal 7 (6.78 g, 11.4 mmol) in THF (110 ml) were added sodium borohydride (2.15 g, 56.8 mmol) and trifluoroborane etherate complex (1.43 ml, 11.4 mmol) at 0 °C. After the mixture was stirred at 0 °C for 30 min, saturated aqueous NaHCO3 solution was added, and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 25% to 33% ethyl acetate in hexane) gave the product 20 (5.85 g, 86%) as a yellow amorphous solid: [α]22D −116.4 (c 1.0, CHCl3);IR (KBr disk, cm−1) 2961, 2867, 1711, 1375, 1258, 677; 1H NMR (400 MHz, CDCl3, 55 °C) δ 7.99 (d, 1H, J = 8.5 Hz), 7.78 (d, 2H, J = 8.5 Hz), 7.38–7.70 (br d, 2H), 7.31 (dd, 1H, J = 7.3, 7.3 Hz), 7.18–7.24 (m, 4 H), 7.00 (d, 1 H, J = 7.8 Hz), 6.88 (d, 1 H, J = 6.6 Hz), 6.81(s, 1 H), 5.15–5.67 (br s, 1 H), 4.45–4.63 (br s, 1 H), 4.32 (d, 1 H, J = 6.6 Hz), 4.12–4.27 (m, 2 H), 2.31–3.10 (br m, 7 H), 2.30 (s, 3 H), 1.27 (t, 3 H, J = 7.9 Hz), 0.91–1.07 (br s, 3 H), 0.25–0.57 (br s, 3H); 13C NMR (100 MHz, CDCl3, 55 °C) δ 166.7, 147.7, 145.0, 139.4, 136.7, 135.6, 135.5, 129.9, 129.4, 129.0, 126.9, 124.8, 123.5, 123.1, 121.9, 120.9, 113.7, 60.5, 54.9, 41.3, 26.3, 25.7, 23.8, 22.5, 21.5, 14.2; ESI HRMSm/z calcd for C35H38N2O5S1 (M+Na)+ 621.2399, found 621.2377.
Ethyl (2S,3S)-3-ethyl-1-[(1S,2R)-2-hydroxyl-7-isopropylindan-1-yl]-2-(N-p-toluenesulfonylindol-3-yl)-piperidine-4-carboxylate (21). To a solution of 20 (3.27 g, 5.46 mmol) in ether (50 ml) was slowly added ethyl magnesium bromide (109 ml, 109 mmol, 1.0 M in ether) at 0 °C. After the mixture was stirred for 20 min, H2O and a 1 N HCl solution were carefully added, and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude product 21 (3.26 g, 95%): [α]24D −31.7 (c 1.1, CHCl3); IR (KBr disk, cm−1) 2963, 2869, 1732, 1449, 1374, 1177, 750;1H and 13C NMR was not corrected; ESI HRMSm/z calcd for C37H44N2O5S1 (M+Na)+ 651.2869, found 651.2850.
Ethyl (2S,3S,4S)-(−)-3-ethyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine-4-caboxylate (22a) and Ethyl (2S,3S,4R)-(−)-3-ethyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine-4-caboxylate (22b). To a solution of 21 (924 mg, 1.47 mmol, mixture of diastereomers) and n-propylamine (1.09 ml, 13.2 mmol) in chloroform (15 ml) was added lead tetraacetate (2.61 mg, 5.88 mmol) at −50 °C. After the mixture was stirred for 15 min, it was added to an ice-1 N aqueous NaOH solution. The resulting mixture was filtered and extracted with chloroform. The organic layers were combined, washed with H2O, dried over MgSO4, filtered and concentrated in vacuo to give the crude products of a 3.0[thin space (1/6-em)]:[thin space (1/6-em)]1 mixture of C4 stereoisomers. Column chromatography on silica gel (from 0% to 2.8% methanol in chloroform) gave 22a (159 mg, 24%) as a yellow amorphous solid and 22b (476 mg, 71%) as a yellow amorphous solid. Data for 22a: [α]24D −8.1 (c 0.7, CHCl3); IR (KBr disk, cm−1) 2959, 2934, 2876, 1724, 1370, 1177, 749; 1H NMR (400 MHz, CDCl3) δ 7.97 (d, 1H, J = 8.2 Hz), 7.70–7.75 (m, 3H), 7.54 (s, 1H), 7.29 (dd, 1H, J = 8.2, 7.3 Hz), 7.16–7.23 (m, 3H), 4.39 (d, 1H, J = 9.4 Hz), 4.11–4.25 (m, 2H), 3.13 (ddd, 1H, J = 11.9, 10.1, 3.0 Hz), 2.99 (dd, 1H, J = 8.9, 4.4 Hz), 2.93 (ddd, 1H, J = 11.9, 3.9, 3.9 Hz), 2.32 (s, 1H), 1.78–2.00 (m, 3H), 1.02–1.33 (m, 5H), 0.69 (t, 3H, J = 7.3 Hz); 13C NMR (100 MHz, CDCl3) δ 174.3, 144.7, 135.3, 135.2, 130.3, 130.0, 126.7, 124.6, 123.8, 123.0, 120.7, 113.7, 60.4, 60.0, 53.6, 45.2, 42.5, 40.3, 28.6, 22.5, 21.5, 21.0, 14.3, 14.2, 11.6; ESI HRMSm/z calcd for C25H30N2O4S1 (M+H)+ 455.2005, found 455.1996. Data for 22b: [α]22D −29.1 (c 1.1, CHCl3); IR (KBr disk, cm−1) 2936, 2812, 1728, 1371, 1175, 749; 1H NMR (400 MHz, CDCl3) δ 7.97 (d, 1H, J = 8.2 Hz), 7.79 (d, 1H, J = 7.8 Hz), 7.72 (d, 2H, J = 8.4 Hz), 7.52 (s, 1H), 7.30 (dd, 1H, J = 7.3, 7.1 Hz), 7.22 (dd, 1H, J = 8.2, 7.3 Hz), 7.18 (d, 2H, J = 8.5 Hz), 4.08–4.29 (m, 2H), 3.67 (d, 1H, J = 10.3 Hz), 3.17 (ddd, 1H, J = 11.7, 3.4, 2.7 Hz), 2.76 (ddd, 1H, J = 11.5, 11.2, 3.4 Hz), 2.45 (ddd, 1H, J = 11.2, 11.2, 4.9 Hz), 2.11 (dddd, 1H, J = 10.8, 10.8, 4.1, 4.1 Hz), 1.82–1.96 (m, 2H), 1.26 (t, 3H, J = 7.3 Hz), 1.11–1.21 (m, 1H), 0.97–1.09 (m, 1H), 0.59 (t, 3H, J = 7.6 Hz),; 13C NMR (100 MHz, CDCl3) δ 175.1, 144.8, 135.4, 135.1, 130.0, 126.7, 124.7, 124.3, 123.9, 123.0, 121.0, 113.7; ESI HRMSm/z calcd for C25H30N2O4S1 (M+H)+ 455.2005, found 455.1986.
Ethyl (2S)-1-[(1S,2R)-cis-2-(t-butyldimethylsilyloxyl)-7-isopropylindan-1-yl]-2-(N-p-toluenesulfonylindol-3-yl)-1,2,5,6-tetrahydropyridine-4-carboxylate (23). To a solution of 20 (251 mg, 0.419 mmol) in dimethylformamide (4.0 ml) were added triethylamine (0.6 ml, 8.23 mmol) and t-butyldimethylchlorosilane (126 mg, 0.84 mmol) and 4,4-dimethylamino-4-pyridine (26 mg, 0.21 mmol) at 0 °C. After the mixture was stirred at room temperatue for 20 h, a saturated aqueous NaHCO3 solution was added, and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed twice with water for twice and with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 6.3% to 33% ethyl acetate in hexane) gave the product 23 (101 mg, 34%) as a yellow amorphous solid and recover of the starting material 20 (98 mg): [α]24D −76.1 (c 0.7, CHCl3); IR (KBr disk, cm−1) 2930, 2856, 1713, 1377, 1257, 1097; 1H NMR (400 MHz, CDCl3) δ 8.00 (d, 1H, J = 8.2), 7.76 (d, 2H, J = 8.2), 7.59 (s, 1H), 7.54 (d, 1H, J = 7.8), 7.31 (dd, 1H, J = 7.3, 7.3), 7.12–7.22 (m, 4H), 6.90–6.96 (m, 2H), 6.72–6.75 (br m, 1H), 5.80–5.85 (br d, 1H, J = 2.7), 4.63 (ddd, 1H, J = 8.2, 8.0, 8.0), 4.21 (d, 1H, J = 7.1), 4.09–4.21 (m, 2H), 3.18 (ddd, 1H, J = 11.2, 11.0, 2.7), 3.06 (dd, 1H, J = 15.3, 8.0), 2.96 (dd, 1H, J = 15.6, 9.4), 2.79 (dd, 1H, J = 11.3, 3.6), 2.32–2.49 (m, 2H), 2.18–2.30 (m, 4H), 1.24 (t, 3H, J = 7.1), 1.04 (s, 9H), 0.83 (d, 3H, J = 6.9), 0.31 (s, 3H), 0.22 (s, 3H), 0.05 (d, 3H, J = 6.9); 13C NMR (100 MHz, CDCl3) δ 167.0, 147.9, 144.9, 140.5, 140.0, 137.3, 135.8, 135.2, 129.9, 129.8, 128.4, 126.7, 125.9, 124.6, 123.6, 122.8, 122.2, 122.1, 121.2, 113.5, 60.5, 60.4, 55.4, 42.2, 42.1, 27.6, 26.4, 26.1, 25.6, 23.1, 21.4, 18.0, 14.2, −3.6, −4.0; ESI HRMSm/z calcd for C41H52N2O5S1Si1 (M+Na)+ 735.3264, found 735.3232.
3-{(2S)-1-[(1S,2R)-cis-1-(t-butyldimethylsilyloxy)-7-isopropylindan-1-yl]-2-(N-p-toluenesulfonylindol-3-yl)-1,2,5,6-tetrahydropyridin-4-yl}pentan-3-ol (24). To a solution of 23 (53 mg, 0.074 mmol) in ether (2.1 ml) was slowly added ethyl magnesium bromide (1.2 ml, 1.19 mmol, 1.0 M in ether) at 0 °C. After the mixture was stirred for 3 h, H2O and saturated aqueous NH4Cl solution were carefully added, and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 6.3% to 12% ethyl acetate in hexane) gave the product 24 (37 mg, 69%) as a yellow amorphous solid: [α]25D −80.3 (c 1.0, CHCl3); IR (KBr disk, cm−1) 2960, 2930, 2855, 1375, 1174, 1099,; 1H NMR (400 MHz, CDCl3) δ 8.00 (d, 1H, J = 8.5), 7.76 (d, 2H, J = 8.2), 7.69 (d, 1H, J = 7.6), 7.55 (s, 1H), 7.29 (dd, 1H, J = 7.8, 7.8), 7.12–7.18 (m, 4H), 6.89–6.96 (m, 2H), 5.71–5.75 (br s, 1H), 5.49–5.52 (m, 1H), 4.65 (dd, 1H, J = 16.0, 8.2), 4.22 (d, 1H, J = 7.1), 3.25 (ddd, 1H, J = 11.0, 11.0, 2.7), 3.06 (dd, 1H, J = 15.6, 8.0), 2.96 (dd, 1H, J = 15.1, 8.0), 2.72 (dd, 1H, J = 15.1, 9.2), 2.48–2.60 (br m, 1H), 2.26 (s, 1H), 1.82–2.10 (m, 1H), 1.80 (d, 1H, J = 16.0), 1.44–1.63 (m, 4H), 1.03 (s, 9H), 0.81–0.89 (m, 6H), 0.76 (t, 3H, J = 7.6), 0.30 (s, 1H), 0.21 (s, 1H), 0.03–0.13 (br m, 3H); 13C NMR (100 MHz, CDCl3) δ 147.9, 144.8, 140.6, 139.4, 137.9, 135.9, 135.3, 130.1, 129.8, 129.7, 128.2, 126.7, 125.4, 124.6, 124.4, 123.8, 123.5, 122.3, 121.1, 113.5, 77.5, 69.7, 55.2, 42.7, 42.2, 32.1, 31.2, 27.6, 27.3, 26.1, 26.0, 25.6, 23.1, 22.8, 21.4, 17.9, 7.8, 7.6 –4.0, −4.7; ESI HRMSm/z calcd for C43H58N2O4S1Si1 (M+Na)+ 749.3784, found 749.3752.
Ethyl (2S,3S,4S)-(−)-3-ethyl-N-methyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine-4-carboxylate (31a) and Ethyl (2S,3S,4R)-(−)-3-ethyl-N-methyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine-4-carboxylate (31b). To a solution of 22a, 22b (448 mg, 0.985 mmol, mixture of diastereomers) and 37% aqueous formaldehyde (400 ml, 4.93 mmol) in acetonitrile (9.8 ml) was added sodium cyanoborohydride (124 mg,1.97 mmol) at room temperature. After the mixture was stirred at this temperature for 30 min, a saturated aqueous NaHCO3 solution was added, and the resulting mixture was extracted with chloroform. The organic layers were combined, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 1.0% methanol in chloroform) gave the alcohol product 31a (111 mg, 24%) as a yellow amorphous solid and 31b (334 mg, 72%) as a yellow amorphous solid. Data for 31a: [α]22D −30.0 (c 1.1, CHCl3); IR (KBr disk, cm−1) 2939, 2878, 2793, 1727, 1447, 1372, 1177, 749; 1H NMR (400 MHz, CDCl3) δ 7.98 (d, 1H, J = 8.3 Hz), 7.87 (d, 1H, J = 7.3 Hz), 7.69 (d, 2H, J = 8.5 Hz), 7.47 (s, 1H), 7.27 (dd, 1H, J = 8.0, 7.3 Hz), 7.12–7.20 (m, 3H), 4.11–4.19 (m, 2H), 3.64 (d, 1H, J = 10.1 Hz), 2.92 (dd, 1H, J = 7.6, 5.0 Hz), 2.81 (ddd, 1H, J = 11.9, 3.4, 3.4 Hz), 2.51 (ddd, 1H, J = 11.9, 11.9, 3.4 Hz), 2.27 (s, 3H), 1.81–2.14 (m, 6H), 1.26 (t, 3H, J = 7.6 Hz), 1.05–1.17 (m, 1H), 0.79–0.92 (m, 1H), 0.58 (t, 3H, J = 7.3 Hz); 13C NMR (100 MHz, CDCl3) δ 173.9, 144.6, 135.5, 134.9, 129.6, 129.5, 129.6, 124.6, 124.5, 122.9, 120.9, 62.1, 59.8, 23.2, 22.8, 22.7, 21.4; ESI HRMSm/z calcd for C26H32N2O4S1 (M+H)+ 469.2161, found 469.2143. Data for 31b: [α]22D −75.6 (c 1.2, CHCl3); IR (KBr disk, cm−1) 2940, 2784, 1728, 1369, 1177, 749; 1H NMR (400 MHz, CDCl3) δ 7.98 (d, 1H, J = 8.2 Hz), 7.77–7.94 (br s, 1H), 7.69 (d, 2H, J = 8.2 Hz), 7.40–7.54 (br s, 1H), 7.29 (dd, 1H, J = 8.2, 7.1 Hz), 7.20 (dd, 1H, J = 7.6, 7.3 Hz), 7.15 (d, 2H, J = 8.2 Hz), 4.06–4.18 (m, 2H), 3.03 (ddd, 1H, J = 11.0, 3.2, 2.8 Hz), 2.89 (d, 1H, J = 9.8 Hz), 2.38 (ddd, 1H, J = 13.5, 11.4, 3.9 Hz), 2.29 (s, 3H), 1.87–2.24 (m, 7H), 1.23 (t, 3H, J = 7.2 Hz), 1.02–1.14 (m, 1H), 0.76–0.94 (m, 1H), 0.57 (t, 3H, J = 7.6 Hz); 13C NMR (100 MHz, CDCl3) δ 175.1, 144.7, 135.7, 134.9, 129.8, 129.6, 126.5, 124.8, 124.5, 123.4, 123.1, 113.8, 65.5, 60.2, 55.9, 46.1, 44.5, 41.3, 29.3, 23.0, 21.4, 14.2, 9.0; ESI HRMSm/z calcd for C26H32N2O4S1 (M+H)+ 469.2161, found 469.2145.
(2S,3S,4R)-(−)-3-Ethyl-4-formyl-N-methyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine (32b). To a solution of 31b (300 mg, 0.64 mmol) in toluene (6.4 ml) was added diisobutylaluminium hydride solution (3.2 mg, 3.2 mmol, 1.0 M in toluene) at −78 °C. After the mixture was stirred at this temperature for 2.5 h, a saturated aqueous potassium sodium tartrate tetrahydrate solution was carefully added. The resulting mixture was stirred at room temperature for 1 h, and extracted with chloroform. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 6.3% methanol in chloroform) gave the alcohol product (237 mg, 87%) as a yellow amorphous solid: [α]22D −86.4 (c 1.0, CHCl3); IR (KBr disk, cm−1) 2938, 2880, 2786, 1597, 1447, 1370, 1174, 749, 689; 1H NMR (400 MHz, CDCl3) δ 7.98 (d, 1H, J = 8.5 Hz), 7.74–7.82 (br s, 1H), 7.70 (d, 2H, J = 8.2 Hz), 7.49 (s, 1H), 7.27 (dd, 1H, J = 7.8, 7.6 Hz), 7.11–7.20 (m, 3H), 3.50 (dd, 1H, J = 10.5, 3.0 Hz), 3.47 (dd, 1H, J = 10.5, 7.1 Hz), 3.03 (br d, 1H, J = 11.5 Hz), 2.93 (br d, 1H, J = 10.3 Hz), 2.54–2.79 (br s, 1H), 2.26 (s, 3H), 2.11 (dd, 1H, J = 11.4, 10.3 Hz), 1.85–1.97 (m, 3H), 1.50–1.81 (m, 3H), 1.15–1.27 (m, 1H), 0.86–0.91 (br s, 1H), 0.58 (t, 3H, J = 7.6 Hz); 13C NMR (100 MHz, CDCl3) δ 144.7, 134.8, 129.5, 126.4, 124.6, 124.4, 124.2, 123.0, 113.7, 64.9, 56.6, 44.6, 40.0, 28.8, 21.3, 20.9, 8.7; ESI HRMSm/z calcd for C24H30N2O3S1 (M+H)+ 427.2055, found 427.2055.

To a solution of oxalyl chloride (0.162 mL, 5.74 mmol) in dichloromethane (8.0 ml) was added DMSO (0.307 ml, 6.89 mmol) at −78 °C. After the mixture was stirred for 10 min at this temperature, a solution of the produced alcohol (980 mg, 2.30 mmol) in dichloromethane (10.0 ml) was added. After the mixture was stirred for 40 min, triethylamine (1.32 ml, 11.5 mmol) was added. After the mixture was stirred for 5 min at this temperature, then stirred for an additional 20 min at room temperature, H2O was added, and the resulting mixture was extracted with chloroform. The organic layers were combined, washed with a saturated aqueous NaHCO3 solution and brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 9.9% methanol in chloroform) gave the aldehyde product 32b (926 mg, 95%) as a yellow amorphous solid: [α]24D −72.4 (c 1.1, CHCl3); IR (KBr disk, cm−1) 2944, 2784, 2705, 1447, 1370, 750; 1H NMR (400 MHz, CDCl3) δ 9.58 (d, 1H, J = 4.1 Hz), 7.99 (d, 1H, J = 8.2 Hz), 7.78–7.86 (br d, 1H, J = 7.3 Hz), 7.70 (d, 2H, J = 8.2 Hz), 7.48 (s, 1H), 7.30 (ddd, 1H, J = 7.3, 7.1, 1.1 Hz), 7.20 (ddd, 1H, J = 7.1, 7.1, 1.0 Hz), 7.16 (d, 2H, J = 8.2 Hz), 3.08 (ddd, 1H, J = 11.5, 3.4, 3.0 Hz), 2.92 (d, 1H, J = 10.3 Hz), 2.26–2.39 (m, 4H), 2.09–2.22 (m, 2H), 1.76–1.93 (m, 5H), 1.07–1.19 (m, 1H), 0.86–0.98 (m, 1H), 0.56 (t, 3H, J = 7.6 Hz); 13C NMR (100 MHz, CDCl3) δ 204.0, 145.1, 136.0, 135.2, 130.0, 126.9, 125.2, 125.0, 123.5, 123.3, 121.6, 114.2, 65.1, 55.5, 52.3, 44.8, 40.3, 26.1, 23.1, 21.7, 9.5; ESI HRMSm/z calcd for C24H28N2O3S1 (M+H)+ 425.1899, found 425.1902.

(2S,3S,4S)-(−)-3-Ethyl-4-formyl-N-methyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine (32a). To a solution of 31a (73 mg, 0.28 mmol) in toluene (2.8 ml) was added diisobutylaluminium hydride solution (1.39 ml, 1.39 mmol, 1.0 M in toluene) at −78 °C. After the mixture was stirred at this temperature for 2 h, a saturated aqueous potassium sodium tartrate tetrahydrate solution was carefully added. The mixture was stirred at room temperature for 1 h, and extracted with chloroform. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 9.1% methanol in chloroform) gave the alcohol product (51 mg, 78%) as a white amorphous solid: [α]26D −33.3 (c 0.9, CHCl3); IR (KBr disk, cm−1) 2955, 2915, 2789, 1597, 1447, 1370, 1174, 749, 683; 1H NMR (400 MHz, CDCl3) δ 7.98 (d, 1H, J = 8.2 Hz), 7.72–7.79 (br d, 1H, J = 7.1 Hz), 7.70 (d, 2H, J = 8.2 Hz), 7.44 (s, 1H), 7.27 (dd, 1H, J = 8.2, 7.1 Hz), 7.14–7.22 (m, 3H), 3.82 (dd, 1H, J = 10.3, 10.1 Hz), 3.73 (dd, 1H, J = 10.5, 4.6 Hz), 3.05 (d, 1H, J = 9.8 Hz), 2.83 (ddd, 1H, J = 11.9, 3.9, 3.7 Hz), 2.41 (dd, 1H, J = 12.1, 10.1 Hz), 2.31 (s, 3H), 1.91≥2.18 (m, 7H), −0.89–1.04 (m, 1H), 0.76–0.89 (m, 1H), 0.64 (t, 3H, J = 7.3 Hz); 13C NMR (100 MHz, CDCl3) δ 144.7, 135.6, 135.0, 129.7, 129.6, 126.6, 124.7, 124.3, 123.1, 121.9, 121.0, 113.9, 63.0, 59.1, 51.1, 44.5, 40.0, 26.5, 22.0, 21.5, 11.4; ESI HRMSm/z calcd for C24H30N2O3S1 (M+H)+ 427.2055, found 427.2059.

To a solution of oxalyl chloride (0.02 mL, 0.77 mmol) in dichloromethane (2.0 ml) was added DMSO (0.04 ml, 0.93 mmol) at −78 °C. After the mixture was stirred for 10 min at this temperature, a solution of the produced alcohol (132 mg, 0.31 mmol) in dichloromethane (2.0 ml) was added. After the mixture was stirred for 40 min, triethylamine (0.18 ml, 1.55 mmol) was added. After the mixture was stirred for 5 min at this temperature, it was stirred for an additional 20 min at room temperature, then H2O was added, and the resulting mixture was extracted with chloroform. The organic layers were combined, washed with a saturated aqueous NaHCO3 solution and brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 9.9% methanol in chloroform) gave 32a (83 mg, 63%) as a white amorphous solid: [α]26D −37.1 (c 1.3, CHCl3); IR (KBr disk, cm−1) 2960, 2788, 1717, 1447, 1370, 750; 1H NMR (400 MHz, CDCl3) δ 9.94 (s, 1H), 7.99 (d, 1H, J = 8.5 Hz), 7.78 (d, 1H, J = 7.9 Hz), 7.71 (d, 2H, J = 8.5 Hz), 7.46 (s, 1H), 7.31 (dd, 1H, J = 7.1, 7.1 Hz), 7.15–7.23 (m, 3H) 3.28 (d, 1H, J = 10.3 Hz), 2.15–2.36 (m, 5H), 1.91–2.11 (m, 5H), 1.24–1.39 (m, 1H), 0.87–1.00 (m, 1H), 0.64 (t, 3H, J = 7.3 Hz); 13C NMR (100 MHz, CDCl3) δ 204.5, 144.8, 135.7, 135.0, 129.7, 126.7, 124.9, 124.5, 123.8, 123.1, 121.1, 114.0, 64.3, 52.7, 46.0, 44.3, 43.9, 25.6, 22.3, 21.5, 11.7; ESI HRMSm/z calcd for C24H28N2O3S1 (M+H)+ 425.1899, found 425.1898.

(2S,3S,4R)-(−)-3-Ethyl-4-formyl-N-methyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine (32b). To a solution of 32a (83 mg, 0.20 mmol) in THF (4 ml) was added DBU (0.05 ml, 0.29 mmol)at room temperature. After the mixture was stirred for 24 h, a saturated aqueous NH4Cl solution was added, and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 9.9% methanol in chloroform) gave the epimerized product 32b (62 mg, 75%) as a yellow amorphous solid, and the recovered starting material 32a (11 mg, 13%) as a yellow amorphous solid.
(2S,3S,4R) -(−)-3-Ethyl-4-acetyl-N-methyl-2-(N-p-toluenesulfonylindol-3-yl)-piperidine (33). To a solution of 32b (471 mg, 1.11 mmol) in THF (10 ml) and ether (10 ml) was added a methyl lithium solution (6.93 ml, 11.1 mmol, 1.6 M in ether) at −40 °C. After the mixture was stirred at this temperature for 30 min, H2O was carefully added, and the resulting mixture was extracted with chloroform. The organic layers ware combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 2% to 4% methanol in chloroform) gave the sec-alcohol product (320 mg, 65%) in a 1[thin space (1/6-em)]:[thin space (1/6-em)]1 mixture of diastereomers as a yellow amorphous solid: [α]24D −90.6 (c 1.1, CHCl3); IR (KBr disk, cm−1) 2963, 2785, 1447, 1370, 1175, 749; 1H NMR (400 MHz, CDCl3) δ 7.97 (d, 1H, J = 8.4 Hz), 7.76–7.87 (br s, 1H), 7.70 (d, 2H, J = 8.4 Hz), 7.43–7.50 (br s, 1H), 7.25–7.32 (m, 1H), 7.13–7.23 (m, 3H), 4.00–4.10 (m, 1H), 3.04–3.11 (m, 1H), 2.88–2.96 (m, 1H), 3.32 (s, 3H), 1.53–2.20 (m, 8H), 1.08–1.40 (m, 4H), 0.77–0.94 (br m, 1H), 0.57–0.68 (m, 3H);13C NMR (100 MHz, CDCl3) δ 144.7, 144.7, 135.7, 135.0, 129.6, 126.6, 124.7, 124.5, 123.1, 113.9, 113.8, 67.3, 66.4, 56.7, 44.7, 44.6, 43.4, 43.2, 23.4, 23.0, 21.5, 21.0, 20.7, 20.5, 17.2, 8.8, 8.4; ESI HRMSm/z calcd for C25H32N2O3S1 (M+H)+ 441.2212, found 441.2201.

To a solution of oxalyl chloride (0.085 mL, 3.00 mmol) in dichloromethane (3.0 ml) was added DMSO (0.160 ml, 3.60 mmol) at −78 °C. After the mixture was stirred for 20 min at this temperature, a solution of the produced sec-alcohol afforded above (529 mg, 1.20 mmol) in dichloromethane (6.0 ml) was added. After the mixture was stirred for 40 min, triethylamine (0.693 ml, 6.00 mmol) was added. After the mixture was stirred for 5 min at this temperature, it was stirred for an additional 20 min at room temperature, then H2O was added, and the resulting mixture was extracted with chloroform. The organic layers were combined, washed with a saturated aqueous NaHCO3 solution, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 0% to 0.5% methanol in chloroform) gave 33 (449 mg, 85%) as a yellow amorphous solid: [α]22D −71.6 (c 1.0, CHCl3); IR (KBr disk, cm−1) 2938, 2784, 1707, 1447, 1340, 1175, 1121; 1H NMR (400 MHz, CDCl3) δ 7.98 (d, 1H, J = 8.2 Hz), 7.78–7.90 (br s, 1H), 7.69 (d, 2H, J = 8.2 Hz), 7.42–7.50 (br s, 1H), 7.30 (ddd, 1H, J = 8.5, 6.1, 1.1 Hz), 7.21 (ddd, 1H, J = 8.0, 7.1, 0.9 Hz), 7.16 (d, 2H, J = 8.0 Hz), 3.06 (ddd, 1H, J = 11.7, 3.4, 3.2 Hz), 2.89 (d, 1H, J = 10.4 Hz), 2.52 (ddd, 1H, J = 11.2, 11.2, 4.8 Hz), 2.30 (s, 1H), 2.07–2.27 (m, 5H), 1.82–1.92 (m, 5H), 0.98–1.06 (m, 1H), 0.74–0.88 (br s, 1H), 0.53 (t, 3H, J = 7.6 Hz); 13C NMR (100 MHz, CDCl3) δ 211.5, 145.0, 135.9, 135.2, 129.8, 126.8, 125.1, 124.8, 123.5, 123.4, 121.8, 114.1, 56.3, 53.7, 44.7, 29.3, 28.8, 23.1, 21.7, 9.4; ESI HRMSm/z calcd for C25H30N2O3S1 (M+H)+439.2055, found 439.2038.

(2S,3S,4R)-(−)-3-Ethyl-4-acetyl-N-methyl-2-(indol-3-yl)-piperidine (5). To a solution of 33 (499 mg, 1.02 mmol) in methanol (7.0 ml) and THF (14.0 ml) was added caesium carbonate (1.33 g, 4.09 mmol) at room temperature. After the mixture was stirred at 65 °C for 6 h, a saturated aqueous NH4Cl solution was added and the resulting mixture was extracted with ethyl acetate. The organic layers were combined, washed with brine, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 1.5% to 9% methanol in chloroform) gave 5 (255 mg, 88%) as a yellow amorphous solid.
(−)-20-Epiuleine (2). To a solution of 5 (17 mg, 0.060 mmol) in chloroform (6.0 ml) was added p-toluenesulfonic acid monohydrate (51 mg, 0.299 mmol) at room temperature. After the mixture was stirred at 60 °C for 24 h. an aqueous 10% NH3 solution was added, and the resulting mixture was extracted with dichloromethane. The organic layers were combined, washed with water, dried over MgSO4, filtered and concentrated in vacuo to give the crude products. Column chromatography on silica gel (from 50% to 75% ethyl acetate in hexane) gave (−)-20-epiuleine (4 mg, 25%) as a yellow amorphous solid: [α]23D −30.1 (c 0.9, CHCl3); IR (KBr disk, cm−1) 3422, 2961, 2930, 1447, 1319, 739; 1H NMR (400 MHz, CDCl3) δ 8.20–8.28 (br s, 1H), 7.56 (d, 1H, J = 8.0 Hz), 7.34 (d, 1H, J = 8.0 Hz), 7.19 (ddd, 1H, J = 8.0, 6.9, 1.2 Hz), 7.10 (ddd, 1H, J = 8.0, 6.9, 1.2 Hz), 5.18 (s, 1H), 4.95 (s, 1H), 4.03 (d, 1H, J = 2.0 Hz), 2.62–2.66 (br s, 1H), 2.43 (dd, 1H, J = 11.2, 4.6 Hz), 2.19–2.30 (m, 4H), 1.94–2.10 (m, 2H), 1.84–1.90 (m, 1H), 1.64–1.76 (m, 1H), 1.37–1.44 (br d, 1H, J = 12.4 Hz), 1.02 (t, 3H, J = 7.6 Hz); 13C NMR (100 MHz, CDCl3) δ 142.2, 136.5, 135.9, 128.9, 122.7, 119.9, 119.7, 112.2, 110.7, 104.5, 54.8, 46.4, 44.9, 44.7, 38.6, 28.5, 23.6, 12.1; ESI HRMSm/z calcd for C18H22N2 (M+H)+ 267.1861, found 267.1850.

Acknowledgements

This work was supported by a Grant-in-Aid for Science Research on Innovative Areas and a Matching Fund Subsidy for a Private University.

Notes and references

  1. J. Bosch and J. Bonjoch, Pentacyclic Strychnos Indole Alkaloids. In Studies in Natural Products Chemistry; Atta-ur-Rahman, ed.; Elsevier: Amsterdam, 1988; Vol. 1, pp 31–88 Search PubMed.
  2. Synthesis of uleine: (a) A. Jackson, N. D. V. Wilson, A. J. Gaskell and J. A. Joule, J. Chem. Soc. C, 1969, 2738 RSC; (b) G. Buchi, S. J. Gould and F. Naf, J. Am. Chem. Soc., 1971, 93, 2492 CrossRef; (c) T. Kametani and T. Suzuki, J. Org. Chem., 1971, 36, 129.
  3. Synthesis of 20-epiuleine: (a) L. J. Dolby and H. Biere, J. Org. Chem., 1970, 35, 3843 CrossRef CAS; (b) M. Natsume and Y. Kitagawa, Tetrahedron Lett., 1980, 21, 839 CrossRef CAS; (c) M. Harris, R. Besselievre, D. S. Grierson and H.-P. Husson, Tetrahedron Lett., 1981, 22, 331 CrossRef CAS; (d) D. S. Grierson, M. Harris and H.-P. Husson, Tetrahedron, 1983, 39, 3683 CrossRef CAS; (e) E. S. Tasber and R. M. Garbaccio, Tetrahedron Lett., 2003, 44, 9185 CrossRef CAS.
  4. M. Saito, M. Kawamura, K. Hiroya and K. Ogasawara, Chem. Commun., 1997, 765 RSC . Enantioselective synthesis of Strychnos indole alkaloids and related compounds: J. Bonjoch and D. Sole, Chem. Rev., 2000, 100, 3455 Search PubMed.
  5. (a) K. Tanaka and S. Katsumura, J. Am. Chem. Soc., 2002, 124, 9660 CrossRef CAS; (b) K. Tanaka, T. Kobayashi, H. Mori and S. Katsumura, J. Org. Chem., 2004, 69, 5906 CrossRef CAS.
  6. T. Kobayashi, M. Nakashima, T. Hakogi, K. Tanaka and S. Katsumura, Org. Lett., 2006, 8, 3809 CrossRef CAS.
  7. T. Kobayashi, F. Hasegawa, K. Tanaka and S Katsumura, Org. Lett., 2006, 8, 3813 CrossRef CAS.
  8. (a) T. Kobayashi, K. Takeuchi, J. Miwa, H. Tsuchikawa and S. Katsumura, Chem. Commun., 2009, 3363 RSC; (b) Y. Li, T. Kobayashi and S. Katsumura, Tetrahedron Lett., 2009, 50, 4482 CrossRef CAS.
  9. H.-P. Husson and J. Royer, Chem. Soc. Rev., 1999, 28, 383 RSC.
  10. K. Higashiyama, H. Inoue and H. Takahashi, Tetrahedron, 1994, 50, 1083 CrossRef CAS.

Footnote

Electronic supplementary information (ESI) available: The experimantal details of 27a–d and 29a–c and 1H and 13C NMR spectra of the products. See DOI: 10.1039/c0ob00627k

This journal is © The Royal Society of Chemistry 2011