Johannes Gurke, Tobias E. Naegele, Sam Hilton, Roberto Pezone, Vincenzo F. Curto, Damiano G. Barone, Emil J. W. List-Kratochvil, Alejandro Carnicer-Lombarte and George G. Malliaras

Mater. Horiz., 2022, 9, 1727
DOI: 10.1039/D1MH01855H

Flow lithography for structured microparticles: fundamentals, methods and applications

Mehmet Akif Sahin, Helen Werner, Shreya Udani, Dino Di Carlo and Ghulam Destgeer

Lab Chip, 2022, 22, 4007
DOI: 10.1039/D2LC00421F

An economical in-class sticker microfluidic activity develops student expertise in microscale physics and device manufacturing

Priscilla Delgado, C. Alessandra Luna, Anjana Dissanayaka, Oluwamayokun Oshinowo, Jesse J. Waggoner, Sara Schley, Todd Fernandez and David R. Myers

Lab Chip, 2024, 24, 2176
DOI: 10.1039/D3LC00912B

3D printing of photopolymers

Jing Zhang and Pu Xiao

Polym. Chem., 2018, 9, 1530
DOI: 10.1039/C8PY00157J

Orientation-independent bubble trap with internal partition for robust operation of microfluidic systems

Bhavagyna Vegunta, Charmaine Lui, Max Kim, Joshua Tran, Maya Papez, Anand K. Ramasubramanian and Sang-Joon John Lee

Lab Chip, 2025, 25, 3423
DOI: 10.1039/D4LC01060D

Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications

Laura A. Milton, Matthew S. Viglione, Louis Jun Ye Ong, Gregory P. Nordin and Yi-Chin Toh

Lab Chip, 2023, 23, 3537
DOI: 10.1039/D3LC00094J

Stereolithographic printing of ionically-crosslinked alginate hydrogels for degradable biomaterials and microfluidics

Thomas M. Valentin, Susan E. Leggett, Po-Yen Chen, Jaskiranjeet K. Sodhi, Lauren H. Stephens, Hayley D. McClintock, Jea Yun Sim and Ian Y. Wong

Lab Chip, 2017, 17, 3474
DOI: 10.1039/C7LC00694B

3D-printed microrobots for biomedical applications

Kun Wei, Chenlong Tang, Hui Ma, Xingmiao Fang and Runhuai Yang

Biomater. Sci., 2024, 12, 4301
DOI: 10.1039/D4BM00674G

An integrated micro-millifluidic processing system

Jia Ming Zhang, Qinglei Ji, Ying Liu, Jianyong Huang and Huiling Duan

Lab Chip, 2018, 18, 3393
DOI: 10.1039/C8LC00636A

3D printing of functional microrobots

Jinhua Li and Martin Pumera

Chem. Soc. Rev., 2021, 50, 2794
DOI: 10.1039/D0CS01062F

Fabrication of unconventional inertial microfluidic channels using wax 3D printing

Mohammad Amin Raoufi, Sajad Razavi Bazaz, Hamid Niazmand, Omid Rouhi, Mohsen Asadnia, Amir Razmjou and Majid Ebrahimi Warkiani

Soft Matter, 2020, 16, 2448
DOI: 10.1039/C9SM02067E

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

Cesar Parra-Cabrera, Clement Achille, Simon Kuhn and Rob Ameloot

Chem. Soc. Rev., 2018, 47, 209
DOI: 10.1039/C7CS00631D

Stereolithographic hydrogel printing of 3D culture chips with biofunctionalized complex 3D perfusion networks

Rujing Zhang and Niels B. Larsen

Lab Chip, 2017, 17, 4273
DOI: 10.1039/C7LC00926G

Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels

Hua Gong, Bryce P. Bickham, Adam T. Woolley and Gregory P. Nordin

Lab Chip, 2017, 17, 2899
DOI: 10.1039/C7LC00644F

3D-printed Quake-style microvalves and micropumps

Yuan-Sheng Lee, Nirveek Bhattacharjee and Albert Folch

Lab Chip, 2018, 18, 1207
DOI: 10.1039/C8LC00001H

A simple procedure to produce FDM-based 3D-printed microfluidic devices with an integrated PMMA optical window

Lucas P. Bressan, Cristina B. Adamo, Reverson F. Quero, Dosil P. de Jesus and José A. F. da Silva

Anal. Methods, 2019, 11, 1014
DOI: 10.1039/C8AY02092B

Non-planar PDMS microfluidic channels and actuators: a review

Yongha Hwang and Rob N. Candler

Lab Chip, 2017, 17, 3948
DOI: 10.1039/C7LC00523G

3D printed self-adhesive PEGDA–PAA hydrogels as modular components for soft actuators and microfluidics

Thomas M. Valentin, Eric M. DuBois, Catherine E. Machnicki, Dhananjay Bhaskar, Francis R. Cui and Ian Y. Wong

Polym. Chem., 2019, 10, 2015
DOI: 10.1039/C9PY00211A

Parameter investigation of an organic–inorganic hybrid resin for a 3D-printed microchannel heat exchanger

Sunjae Lee, Amirreza Mottafegh and Dong-Pyo Kim

React. Chem. Eng., 2024, 9, 2089
DOI: 10.1039/D3RE00694H

Mechanics of shape distortion of DLP 3D printed structures during UV post-curing

Dong Wu, Zeang Zhao, Qiang Zhang, H. Jerry Qi and Daining Fang

Soft Matter, 2019, 15, 6151
DOI: 10.1039/C9SM00725C

3D printed porous membrane integrated devices to study the chemoattractant induced behavioural response of aquatic organisms

Hari Kalathil Balakrishnan, Aaron G. Schultz, Soo Min Lee, Richard Alexander, Ludovic F. Dumée, Egan H. Doeven, Dan Yuan and Rosanne M. Guijt

Lab Chip, 2024, 24, 505
DOI: 10.1039/D3LC00488K

Bridging the gap between performance and biocompatibility: non-toxic, multifunctional aliphatic photoinitiators based on α-ketoesters for lithography-based manufacturing applications

Antonella Fantoni, Judith Krauß, Theresa Ammann, Philipp Melchior, Dieter Nees, Martin Frauenlob, Robert Liska and Stefan Baudis

Mater. Adv., 2025, 6, 9243
DOI: 10.1039/D5MA00926J

Engineering materials with light: recent progress in digital light processing based 3D printing

Zhi Zhao, Xiaoxiao Tian and Xiaoyan Song

J. Mater. Chem. C, 2020, 8, 13896
DOI: 10.1039/D0TC03548C

Gut-on-chip methodology based on 3D-printed molds: a cost-effective and accessible approach

Elise Delannoy, Aurélie Burette, Sébastien Janel, Sabine Poiret, Nathalie Deboosere, Catherine Daniel and Alexandre Grassart

Lab Chip, 2025, 25, 4396
DOI: 10.1039/D5LC00147A

3D printed nitric oxide-releasing poly(acrylic acid)/F127/cellulose nanocrystal hydrogels

Murilo I. Santos, Laura C. E. da Silva, Mateus P. Bomediano, Daniele M. Catori, Maria C. Gonçalves and Marcelo G. de Oliveira

Soft Matter, 2021, 17, 6352
DOI: 10.1039/D1SM00163A

A virtual visualization method for improving the manufacturing accuracy based VPP 3D printers

Zhengdong Yu, Zhenyu Miao, Zuoyu Liu, Bohan Yang, Tongxing Zuo, Xiangqin Li, Huan Wang and Zhenyu Liu

Heliyon, 2024, 10, e37051
DOI: 10.1016/j.heliyon.2024.e37051

3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions

Michael Beauchamp, Hua Gong, Adam Woolley and Gregory Nordin

Micromachines, 2018, 9, 326
DOI: 10.3390/mi9070326

Feasibility and Biocompatibility of 3D‐Printed Photopolymerized and Laser Sintered Polymers for Neuronal, Myogenic, and Hepatic Cell Types

Rowan P. Rimington, Andrew J. Capel, Darren J. Player, Richard J. Bibb, Steven D. R. Christie and Mark P. Lewis

Macromolecular Bioscience, 2018, 18
DOI: 10.1002/mabi.201800113

4D Printing of a Bioinspired Microneedle Array with Backward‐Facing Barbs for Enhanced Tissue Adhesion

Daehoon Han, Riddish S. Morde, Stefano Mariani, Antonino A. La Mattina, Emanuele Vignali, Chen Yang, Giuseppe Barillaro and Howon Lee

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.201909197

3D Printed Microfluidic Probes

Ayoola Brimmo, Pierre-Alexandre Goyette, Roaa Alnemari, Thomas Gervais and Mohammad A. Qasaimeh

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-29304-x

Vat Photopolymerization 3D Printing of Advanced Soft Sensors and Actuators: From Architecture to Function

Wenyu Zhao, Ziya Wang, Jianpeng Zhang, Xiaopu Wang, Yingtian Xu, Ning Ding and Zhengchun Peng

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202001218

Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review

Nafisat Gyimah, Ott Scheler, Toomas Rang and Tamas Pardy

Micromachines, 2021, 12, 339
DOI: 10.3390/mi12030339

Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing

Gustavo González, Désirée Baruffaldi, Cinzia Martinengo, Angelo Angelini, Annalisa Chiappone, Ignazio Roppolo, Candido Fabrizio Pirri and Francesca Frascella

Nanomaterials, 2020, 10, 1788
DOI: 10.3390/nano10091788

Digital Manufacturing for Microfluidics

Arman Naderi, Nirveek Bhattacharjee and Albert Folch

Annu. Rev. Biomed. Eng., 2019, 21, 325
DOI: 10.1146/annurev-bioeng-092618-020341

Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation

Seok Kim, Jordan J. Handler, Young Tae Cho, George Barbastathis and Nicholas X. Fang

Sci. Adv., 2021, 7
DOI: 10.1126/sciadv.abh1200

ABA Block Copolyester Thiol–Ene Resin From Triethylborane-Assisted Ring-Opening Copolymerization

Warrick Ma, Paula G. Miller and Yadong Wang

ACS Appl. Polym. Mater., 2024, 6, 1503
DOI: 10.1021/acsapm.3c02745

Functional Materials for DLP-SLA 3D Printing Using Thiol–Acrylate Chemistry: Resin Design and Postprint Applications

Lubna Shahzadi, Fernando Maya, Michael C. Breadmore and Stuart C. Thickett

ACS Appl. Polym. Mater., 2022, 4, 3896
DOI: 10.1021/acsapm.2c00358

Resolution improvement of 3D stereo-lithography through the direct laser trajectory programming: Application to microfluidic deterministic lateral displacement device

Petra Juskova, Alexis Ollitrault, Marco Serra, Jean-Louis Viovy and Laurent Malaquin

Analytica Chimica Acta, 2018, 1000, 239
DOI: 10.1016/j.aca.2017.11.062

Auto-amplification and spatial propagation of neutrophil extracellular traps

Pan Deng, Alec Xu, Peter M. Grin, Kerryn Matthews, Simon P. Duffy and Hongshen Ma

Commun Biol, 2024, 7
DOI: 10.1038/s42003-024-06074-z

Infectious pathogens meet point-of-care diagnostics

Mohammad Zarei

Biosensors and Bioelectronics, 2018, 106, 193
DOI: 10.1016/j.bios.2018.02.007

3D Printing of Organs-On-Chips

Hee-Gyeong Yi, Hyungseok Lee and Dong-Woo Cho

Bioengineering, 2017, 4, 10
DOI: 10.3390/bioengineering4010010

Evaluation of flexural properties and reliability with photo-curing 3D printing resin according to the printing orientations

Yong-Woon Im, Doo-Bin Song, Seong-Sig Hwang, Sa-Hak Kim and Man-So Han

J. Tech. Dent., 2021, 43, 13
DOI: 10.14347/jtd.2021.43.1.13

Biocompatible micro, soft bellow actuator rapidly manufactured using 3D-printed soluble mold

Woojun Jung, Yoon Kang, Seungoh Han and Yongha Hwang

J. Micromech. Microeng., 2019, 29, 125005
DOI: 10.1088/1361-6439/ab477f

Facile Route for 3D Printing of Transparent PETg-Based Hybrid Biomicrofluidic Devices Promoting Cell Adhesion

Viraj Mehta, Sukanya Vilikkathala Sudhakaran and Subha Narayan Rath

ACS Biomater. Sci. Eng., 2021, 7, 3947
DOI: 10.1021/acsbiomaterials.1c00633

High-speed 3D printing for microfluidics: Opportunities and challenges

Jason Collingwood, Karnika De Silva and Khalid Arif

Materials Today: Proceedings, 2023
DOI: 10.1016/j.matpr.2023.05.683

Facile Fabrication of Microfluidic Chips for 3D Hydrodynamic Focusing and Wet Spinning of Polymeric Fibers

Akin Gursoy, Kamran Iranshahi, Kongchang Wei, Alexis Tello, Efe Armagan, Luciano F. Boesel, Fabien Sorin, René M. Rossi, Thijs Defraeye and Claudio Toncelli

Polymers, 2020, 12, 633
DOI: 10.3390/polym12030633

Fabrication of Microfluidic Devices for Emulsion Formation by Microstereolithography

Max J. Männel, Elif Baysak and Julian Thiele

Molecules, 2021, 26, 2817
DOI: 10.3390/molecules26092817

High‐Scale 3D‐Bioprinting Platform for the Automated Production of Vascularized Organs‐on‐a‐Chip

Anna Fritschen, Nils Lindner, Sebastian Scholpp, Philipp Richthof, Jonas Dietz, Philipp Linke, Zeno Guttenberg and Andreas Blaeser

Adv Healthcare Materials, 2024, 13
DOI: 10.1002/adhm.202304028

Ultrasensitive and rapid quantification of rare tumorigenic stem cells in hPSC-derived cardiomyocyte populations

Zongjie Wang, Mark Gagliardi, Reza M. Mohamadi, Sharif U. Ahmed, Mahmoud Labib, Libing Zhang, Sandra Popescu, Yuxiao Zhou, Edward H. Sargent, Gordon M. Keller and Shana O. Kelley

Sci. Adv., 2020, 6
DOI: 10.1126/sciadv.aay7629

From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication

Jingjing Xu, Michael Harasek and Margit Gföhler

Polymers, 2025, 17, 455
DOI: 10.3390/polym17040455

UV Adhesive Hybrid Bonding for Sub-100-μm DLP-3D-Printed Microchannels

Seungmin Lee, Bhargav Krishna Pullagura, Youngbin Kim, Chan Lee, Abdi Mirgissa Kaba, Boseok Huh, Jintae Kim, Sang Kug Chung and Dohyun Kim

BioChip J, 2025, 19, 367
DOI: 10.1007/s13206-025-00206-1

Biocompatible, Flexible, and Oxygen-Permeable Silicone-Hydrogel Material for Stereolithographic Printing of Microfluidic Lab-On-A-Chip and Cell-Culture Devices

Sabine Zips, Lukas Hiendlmeier, Lennart Jakob Konstantin Weiß, Heike Url, Tetsuhiko F. Teshima, Richard Schmid, Markus Eblenkamp, Petra Mela and Bernhard Wolfrum

ACS Appl. Polym. Mater., 2021, 3, 243
DOI: 10.1021/acsapm.0c01071

Additive Manufacturing and Physicomechanical Characteristics of PEGDA Hydrogels: Recent Advances and Perspective for Tissue Engineering

Mohammad Hakim Khalili, Rujing Zhang, Sandra Wilson, Saurav Goel, Susan A. Impey and Adrianus Indrat Aria

Polymers, 2023, 15, 2341
DOI: 10.3390/polym15102341

Simple-Flow: A 3D-Printed Multiwell Flow Plate to Coculture Primary Human Lung Cells at the Air–Liquid Interface

Cinta Iriondo, Sem Koornneef, Kari-Pekka Skarp, Marjon Buscop-van Kempen, Anne Boerema-de Munck and Robbert J. Rottier

ACS Biomater. Sci. Eng., 2025, 11, 451
DOI: 10.1021/acsbiomaterials.4c01322

FDM 3D Printing of High-Pressure, Heat-Resistant, Transparent Microfluidic Devices

Valentin Romanov, Raheel Samuel, Marzieh Chaharlang, Alexander R. Jafek, Adam Frost and Bruce K. Gale

Anal. Chem., 2018, 90, 10450
DOI: 10.1021/acs.analchem.8b02356

3D‐Bioprinting for Precision Microtissue Engineering: Advances, Applications, and Prospects

Jinrun Liu, Qi Wang, Yinpeng Le, Min Hu, Chen Li, Ni An, Qingru Song, Wenzhen Yin, Wenrui Ma, Mingyue Pan, Yutian Feng, Yunfang Wang, Lu Han and Juan Liu

Adv Healthcare Materials, 2025, 14
DOI: 10.1002/adhm.202403781

3D‐Printed Microfluidic Devices for Materials Science

Moien Alizadehgiashi, Albert Gevorkian, Moritz Tebbe, Minseok Seo, Elisabeth Prince and Eugenia Kumacheva

Adv Materials Technologies, 2018, 3
DOI: 10.1002/admt.201800068

A Review on Additive Manufacturing of Micromixing Devices

Marina Garcia-Cardosa, Francisco-Javier Granados-Ortiz and Joaquín Ortega-Casanova

Micromachines, 2021, 13, 73
DOI: 10.3390/mi13010073

High-resolution lithographic biofabrication of hydrogels with complex microchannels from low-temperature-soluble gelatin bioresins

Riccardo Levato, Khoon S. Lim, Wanlu Li, Ane Urigoitia Asua, Laura Blanco Peña, Mian Wang, Marc Falandt, Paulina Nuñez Bernal, Debby Gawlitta, Yu Shrike Zhang, Tim B.F. Woodfield and Jos Malda

Materials Today Bio, 2021, 12, 100162
DOI: 10.1016/j.mtbio.2021.100162

Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications

Carmen M. González-Henríquez, Mauricio A. Sarabia-Vallejos and Juan Rodriguez-Hernandez

Progress in Polymer Science, 2019, 94, 57
DOI: 10.1016/j.progpolymsci.2019.03.001

3D printing in biotechnology—An insight into miniaturized and microfluidic systems for applications from cell culture to bioanalytics

Christopher Heuer, John‐Alexander Preuß, Taieb Habib, Anton Enders and Janina Bahnemann

Engineering in Life Sciences, 2022, 22, 744
DOI: 10.1002/elsc.202100081

Rigor & Reproducibility: pH Adjustments of Papain with L-Cysteine Dissociation Solutions and Cell Media Using Phenol Red Spectrophotometry

Joshua M. Hilner, Allison Turner, Calissa Vollmar-Zygarlenski and Larry J. Millet

Biosensors, 2025, 15, 727
DOI: 10.3390/bios15110727

Thermal analysis and shrinkage characterization of the photopolymers for DLP additive manufacturing processes

Kubra Sekmen, Thomas Rehbein, Michael Johlitz, Alexander Lion and Andrei Constantinescu

Continuum Mech. Thermodyn., 2024, 36, 351
DOI: 10.1007/s00161-022-01137-0

Process design and grasping performance of 4D-printed biomimetic curling soft actuators

Zhengqi Qian, Shu Huang, Hang Zhang, Youqing Zhang, Jie Sheng, Junhui Zhang, Emmanuel Agyenim-Boateng and Mingliang Zhu

Journal of Manufacturing Processes, 2025, 153, 99
DOI: 10.1016/j.jmapro.2025.08.069

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Four-Dimensional Stimuli-Responsive Hydrogels Micro-Structured via Femtosecond Laser Additive Manufacturing

Yufeng Tao, Chengchangfeng Lu, Chunsan Deng, Jing Long, Yunpeng Ren, Zijie Dai, Zhaopeng Tong, Xuejiao Wang, Shuai Meng, Wenguang Zhang, Yinuo Xu and Linlin Zhou

Micromachines, 2021, 13, 32
DOI: 10.3390/mi13010032

Microfluidic Brain‐on‐a‐Chip: From Key Technology to System Integration and Application

Zhaohe Wang, Yongqian Zhang, Zhe Li, Hao Wang, Nuomin Li and Yulin Deng

Small, 2023, 19
DOI: 10.1002/smll.202304427

Demonstration of a Transparent and Adhesive Sealing Top for Microfluidic Lab-Chip Applications

Anurag Agarwal, Asif Salahuddin and Mohammed Jalal Ahamed

Sensors, 2024, 24, 1797
DOI: 10.3390/s24061797

A short review of spiral microfluidic devices with distinct cross-sectional geometries

S. Ramya, S. Praveen Kumar, G. Dinesh Ram and D. Lingaraja

Microfluid Nanofluid, 2022, 26
DOI: 10.1007/s10404-022-02593-5

Sequential process optimization for a digital light processing system to minimize trial and error

Jae Won Choi, Gyeong-Ji Kim, Sukjoon Hong, Jeung Hee An, Baek-Jin Kim and Cheol Woo Ha

Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-17841-5

3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications

Megan Carve and Donald Wlodkowic

Micromachines, 2018, 9, 91
DOI: 10.3390/mi9020091

Investigation of Contact Angles and Surface Morphology of 3D-Printed Materials

Johannes Neukäufer, Bernhard Seyfang and Thomas Grützner

Ind. Eng. Chem. Res., 2020, 59, 6761
DOI: 10.1021/acs.iecr.0c00430

Breaking the 100 µm Barrier: Sub‐10 µm 3D Microfluidic Channels via Low‐Cost Maskless Photolithography

Xinghao Chen, Xinjian Xie, Guangrui Ju, Wencai Liu, Zhiyin Wang, Shengwei Feng, Yuanzhi Zhu, Feng Li and Wenqian Feng

Small, 2025, 21
DOI: 10.1002/smll.202508809

3D Printing and Easy Removal of Transparent Thin Polymeric Sheets and their Application in Solar Cells Encapsulation

Fahad Alam and Nazek El-Atab

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202300183

Fabrication approaches for high-throughput and biomimetic disease modeling

Mackenzie L. Grubb and Steven R. Caliari

Acta Biomaterialia, 2021, 132, 52
DOI: 10.1016/j.actbio.2021.03.006

3D printed microfluidics for cell biological applications

Liang Zhao and Xiayan Wang

TrAC Trends in Analytical Chemistry, 2023, 158, 116864
DOI: 10.1016/j.trac.2022.116864

A Poly-(ethylene glycol)-diacrylate 3D-Printed Micro-Bioreactor for Direct Cell Biological Implant-Testing on the Developing Chicken Chorioallantois Membrane

Eric Lutsch, Andreas Struber, Georg Auer, Thomas Fessmann and Günter Lepperdinger

Micromachines, 2022, 13, 1230
DOI: 10.3390/mi13081230

Compatibility of Popular Three-Dimensional Printed Microfluidics Materials with In Vitro Enzymatic Reactions

Wan-Zhen Sophie Lin, William E. Evenson, W. Kristian Vu Bostic, Richard W. Roberts and Noah Malmstadt

ACS Appl. Bio Mater., 2022, 5, 818
DOI: 10.1021/acsabm.1c01180

3D Printed Punctal Plugs for Controlled Ocular Drug Delivery

Xiaoyan Xu, Sahar Awwad, Luis Diaz-Gomez, Carmen Alvarez-Lorenzo, Steve Brocchini, Simon Gaisford, Alvaro Goyanes and Abdul W. Basit

Pharmaceutics, 2021, 13, 1421
DOI: 10.3390/pharmaceutics13091421

Multiple Cell Cultures for MRI Analysis

Zuzanna Bober, David Aebisher, Marcin Olek, Aleksandra Kawczyk-Krupka and Dorota Bartusik-Aebisher

IJMS, 2022, 23, 10109
DOI: 10.3390/ijms231710109

Eco‐friendly glass wet etching for MEMS application: A review

Kyeonggon Choi, Seung‐Wook Kim, Jae‐Hyoung Lee, Baojin Chu and Dae‐Yong Jeong

J Am Ceram Soc., 2024, 107, 6497
DOI: 10.1111/jace.19961

Subtractive Manufacturing of Microfluidic 3D Braid Mixers

Georgette Bernice Salieb‐Beugelaar, Kegang Liu and Patrick Hunziker

Adv Eng Mater, 2018, 20
DOI: 10.1002/adem.201800243

Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations

Ji Suk Shim, Jong-Eun Kim, Sang Hoon Jeong, Yeon Jo Choi and Jae Jun Ryu

The Journal of Prosthetic Dentistry, 2020, 124, 468
DOI: 10.1016/j.prosdent.2019.05.034

Advancing 3D-Printed Microfluidics: Characterization of a Gas-Permeable, High-Resolution PDMS Resin for Stereolithography

Elyse Fleck, Alec Sunshine, Emma DeNatale, Charlise Keck, Alexandra McCann and Joseph Potkay

Micromachines, 2021, 12, 1266
DOI: 10.3390/mi12101266

Emerging Roles of Microfluidics in Brain Research: From Cerebral Fluids Manipulation to Brain-on-a-Chip and Neuroelectronic Devices Engineering

Jiandi Wan, Sitong Zhou, Hing Jii Mea, Yaojun Guo, Hansol Ku and Brianna M. Urbina

Chem. Rev., 2022, 122, 7142
DOI: 10.1021/acs.chemrev.1c00480

Two-photon absorption cross-section investigation of visible-light photoinitiators under Q-switched Nd:YAG nanosecond pulse laser at 1064 nm

Suwat Romphosri, Phyu Sin Oo, Pornpawee Karanyasopon, Rakchart Traiphhol and Tanant Waritanant

Appl. Phys. B, 2022, 128
DOI: 10.1007/s00340-022-07888-7

Combining Hydrophilic and Hydrophobic Materials in 3D Printing for Fabricating Microfluidic Devices with Spatial Wettability

Max J. Männel, Niclas Weigel, Nicolas Hauck, Thomas Heida and Julian Thiele

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202100094

Method for Attaining Dimensionally Accurate Conditions for High-Resolution Three-Dimensional Printing Ceramic Composite Structures Using MicroCLIP Process

Henry Oliver T. Ware and Cheng Sun

Journal of Micro and Nano-Manufacturing, 2019, 7
DOI: 10.1115/1.4044128

Multifaceted polymeric materials in three‐dimensional processing (3DP) technologies: Current progress and prospects

Olayinka Oderinde, Shunli Liu, Kewen Li, Mengmeng Kang, Hussain Imtiaz, Fang Yao and Guodong Fu

Polymers for Advanced Techs, 2018, 29, 1586
DOI: 10.1002/pat.4281

Low-cost, versatile, and highly reproducible microfabrication pipeline to generate 3D-printed customised cell culture devices with complex designs

Cathleen Hagemann, Matthew C. D. Bailey, Eugenia Carraro, Ksenia S. Stankevich, Valentina Maria Lionello, Noreen Khokhar, Pacharaporn Suklai, Carmen Moreno-Gonzalez, Kelly O’Toole, George Konstantinou, Christina L. Dix, Sudeep Joshi, Eleonora Giagnorio, Mads S. Bergholt, Christopher D. Spicer, Albane Imbert, Francesco Saverio Tedesco, Andrea Serio and Chaitan Khosla

PLoS Biol, 2024, 22, e3002503
DOI: 10.1371/journal.pbio.3002503

Fast multi-resolution 3D printing of microfluidics: enabling 2 μm channels and ultra-compact mixers

Dallin S. Miner, Matthew S. Viglione, Kent Hooper, Adam T. Woolley and Gregory P. Nordin

Microsyst Nanoeng, 2026, 12
DOI: 10.1038/s41378-026-01194-4

High-accuracy DLP 3D printing of closed microfluidic channels based on a mask option strategy

Zhengdong Yu, Xiangqin Li, Tongxing Zuo, Qianglong Wang, Huan Wang and Zhenyu Liu

Int J Adv Manuf Technol, 2023, 127, 4001
DOI: 10.1007/s00170-023-11769-4

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Arpith Vedhanayagam, Michael Golfetto, Jeffrey L. Ram and Amar S. Basu

Micromachines, 2023, 14, 1519
DOI: 10.3390/mi14081519

Applied tutorial for the design and fabrication of biomicrofluidic devices by resin 3D printing

Hannah.B. Musgrove, Megan.A. Catterton and Rebecca.R. Pompano

Analytica Chimica Acta, 2022, 1209, 339842
DOI: 10.1016/j.aca.2022.339842

A novel highly electrically conductive composite resin for stereolithography

Giorgio Scordo, Valentina Bertana, Luciano Scaltrito, Sergio Ferrero, Matteo Cocuzza, Simone L. Marasso, Stefano Romano, Raffaella Sesana, Felice Catania and Candido F. Pirri

Materials Today Communications, 2019, 19, 12
DOI: 10.1016/j.mtcomm.2018.12.017

Low-Viscosity Polydimethylsiloxane Resin for Facile 3D Printing of Elastomeric Microfluidics

Elyse Fleck, Charlise Keck, Karolina Ryszka, Emma DeNatale and Joseph Potkay

Micromachines, 2023, 14, 773
DOI: 10.3390/mi14040773

Biofabrication Strategies and Engineered In Vitro Systems for Vascular Mechanobiology

Shantanu Pradhan, Omar A. Banda, Cindy J. Farino, John L. Sperduto, Keely A. Keller, Ryan Taitano and John H. Slater

Adv Healthcare Materials, 2020, 9
DOI: 10.1002/adhm.201901255

Rapid Fabrication by Digital Light Processing 3D Printing of a SlipChip with Movable Ports for Local Delivery to Ex Vivo Organ Cultures

Megan A Catterton, Alexander G Ball and Rebecca R Pompano

Micromachines, 2021, 12, 993
DOI: 10.3390/mi12080993

Enzyme Scaffolds with Hierarchically Defined Properties via 3D Jet Writing

Anke Steier, Barbara Schmieg, Yannic Irtel von Brenndorff, Manuel Meier, Hermann Nirschl, Matthias Franzreb and Joerg Lahann

Macromolecular Bioscience, 2020, 20
DOI: 10.1002/mabi.202000154

Bioprinting of Small-Diameter Blood Vessels

Xia Cao, Sushila Maharjan, Ramla Ashfaq, Jane Shin and Yu Shrike Zhang

Engineering, 2021, 7, 832
DOI: 10.1016/j.eng.2020.03.019

3D Micropatterned All‐Flexible Microfluidic Platform for Microwave‐Assisted Flow Organic Synthesis

Deniz Hur, Mehmet G. Say, Sibel E. Diltemiz, Fatma Duman, Arzu Ersöz and Rıdvan Say

ChemPlusChem, 2018, 83, 42
DOI: 10.1002/cplu.201700440

3D Bioprinting for fabrication of tissue models of COVID-19 infection

Jinah Jang, Anisha Kabir, Pallab Datta, Julia Oh, Adam Williams, Veli Ozbolat, Derya Unutmaz and Ibrahim T. Ozbolat

Essays in Biochemistry, 2021, 65, 503
DOI: 10.1042/EBC20200129

In-situ transfer vat photopolymerization for transparent microfluidic device fabrication

Yang Xu, Fangjie Qi, Huachao Mao, Songwei Li, Yizhen Zhu, Jingwen Gong, Lu Wang, Noah Malmstadt and Yong Chen

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-28579-z

Light-induced additive manufacturing in membrane technology

Abdollah Khosravanian, Michael T. Scalzo, Huacheng Zhang, Benny D. Freeman, Ryan A. Mulvenna, Matthew R. Hill and Timothy F. Scott

Polymer, 2024, 296, 126833
DOI: 10.1016/j.polymer.2024.126833

Effect of layer thickness and printing orientation on the color stability and stainability of a 3D-printed resin material

Eun-Hyuk Lee, Jin-Soo Ahn, Young-Jun Lim, Ho-Beom Kwon and Myung-Joo Kim

The Journal of Prosthetic Dentistry, 2022, 127, 784.e1
DOI: 10.1016/j.prosdent.2022.01.024

A ‘print–pause–print’ protocol for 3D printing microfluidics using multimaterial stereolithography

Yong Tae Kim, Alireza Ahmadianyazdi and Albert Folch

Nat Protoc, 2023, 18, 1243
DOI: 10.1038/s41596-022-00792-6

A comparative analysis of capacitive-based flexible PDMS pressure sensors

Julia Pignanelli, Kory Schlingman, Tricia Breen Carmichael, Simon Rondeau-Gagné and Mohammed Jalal Ahamed

Sensors and Actuators A: Physical, 2019, 285, 427
DOI: 10.1016/j.sna.2018.11.014

Desktop‐Stereolithography 3D‐Printing of a Poly(dimethylsiloxane)‐Based Material with Sylgard‐184 Properties

Nirveek Bhattacharjee, Cesar Parra‐Cabrera, Yong Tae Kim, Alexandra P. Kuo and Albert Folch

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800001

3D-printed microfluidic and millifluidic devices for cell culture and mechanotransduction studies: A review

Jeromi G. López Santiago, Olga M. Rodríguez Martínez and Paul A. Sundaram

Journal of Micromanufacturing, 2024, 7, 216
DOI: 10.1177/25165984241286651

Additive manufacturing of a 3D vascular chip based on cytocompatible hydrogel

Yong Tae Kim, Jong Seob Choi, Eunjeong Choi and Heungsop Shin

European Polymer Journal, 2021, 151, 110451
DOI: 10.1016/j.eurpolymj.2021.110451

A Review on 3D Printable Techniques for Tissue Engineering

Sharda Gupta, Akalabya Bissoyi and Arindam Bit

BioNanoSci., 2018, 8, 868
DOI: 10.1007/s12668-018-0525-4

Improving the Reliability of Digital Light Processing Printing Using a Digital Micromirror Device Grayscale-Gaussian Correction Method

Ah Yeon Shin, Jae Won Choi, Ji Eun Lee, Seok Beom Kim, Yong Tae Kim, Ji Young Song, Suk Hee Park and Cheol Woo Ha

ACS Appl. Polym. Mater., 2024, 6, 13753
DOI: 10.1021/acsapm.4c02575

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms

Niall P. Macdonald, Joan M. Cabot, Petr Smejkal, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Anal. Chem., 2017, 89, 3858
DOI: 10.1021/acs.analchem.7b00136

Fabrication of 3D scaffolds reproducing intestinal epithelium topography by high-resolution 3D stereolithography

Justine Creff, Rémi Courson, Thomas Mangeat, Julie Foncy, Sandrine Souleille, C. Thibault, Arnaud Besson and Laurent Malaquin

Biomaterials, 2019, 221, 119404
DOI: 10.1016/j.biomaterials.2019.119404

Monte Carlo simulation of photopolymerizable ceramic suspension curing profile in vat photopolymerization

Zhangjing Yu, Zhiguo Wang, Xuehua Yu, Yichao Wang, Ke Zhong, Yuhui Zhao and Jibin Zhao

Journal of the European Ceramic Society, 2024, 44, 4083
DOI: 10.1016/j.jeurceramsoc.2023.12.102

3D printing on glass for direct sensor integration

M Neubauer, M McGlennen, S Thomas and S Warnat

Eng. Res. Express, 2019, 1, 025051
DOI: 10.1088/2631-8695/ab5e9f

A fully 3D-printed versatile tumor-on-a-chip allows multi-drug screening and correlation with clinical outcomes for personalized medicine

Eliana Steinberg, Roy Friedman, Yoel Goldstein, Nethanel Friedman, Ofer Beharier, Jonathan Abraham Demma, Gideon Zamir, Ayala Hubert and Ofra Benny

Commun Biol, 2023, 6
DOI: 10.1038/s42003-023-05531-5

Development and performance of a 3D‐printable poly(ethylene glycol) diacrylate hydrogel suitable for enzyme entrapment and long‐term biocatalytic applications

Barbara Schmieg, Adrian Schimek and Matthias Franzreb

Engineering in Life Sciences, 2018, 18, 659
DOI: 10.1002/elsc.201800030

Design and optimization of projection stereolithography additive manufacturing system with multi-pass scanning

Qin Qin, Jigang Huang, Jin Yao and Wenxiang Gao

RPJ, 2021, 27, 636
DOI: 10.1108/RPJ-08-2019-0219

A Three-Dimensional Liquid-Based Exchangeable Gradient Osmosis Chip for a Permeability Controllable Microfluidic Device

Jae Won Choi, Jisun Lee, Jeongho Yang, Young Won Kim, Suk Hee Park, Seokbeom Kim, Sukjoon Hong, Yong Son, Jisu Han and Cheol Woo Ha

ACS Appl. Polym. Mater., 2021, 3, 5836
DOI: 10.1021/acsapm.1c01072

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices

Hyun Namgung, Abdi Mirgissa Kaba, Hyeonkyu Oh, Hyunjin Jeon, Jeonghwan Yoon, Haseul Lee and Dohyun Kim

BioChip J, 2022, 16, 82
DOI: 10.1007/s13206-022-00048-1

Thermal and dielectric properties enhancement of photocurable acrylate polymers for digital light processing 3D printed electronics

Ho‐Shu Huang and Ying‐Chih Liao

J of Applied Polymer Sci, 2022, 139
DOI: 10.1002/app.52070

Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices

Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Anal Bioanal Chem, 2017, 409, 4311
DOI: 10.1007/s00216-017-0398-3

Fabrication of a Malaria-Ab ELISA Bioassay Platform with Utilization of Syringe-Based and 3D Printed Assay Automation

Christopher Lim, Yangchung Lee and Lawrence Kulinsky

Micromachines, 2018, 9, 502
DOI: 10.3390/mi9100502

Additive Manufacturing of Molecular Architecture Encoded Stretchable Polyethylene Glycol Hydrogels and Elastomers

Baiqiang Huang, Myoeum Kim, Pu Zhang, Emmanuel Oduro, Daniel A. Rau and Li‐Heng Cai

Advanced Materials, 2026, 38
DOI: 10.1002/adma.202512806

Additive Manufacturing of Biomaterials, Tissues, and Organs

Amir A. Zadpoor and Jos Malda

Ann Biomed Eng, 2017, 45, 1
DOI: 10.1007/s10439-016-1719-y

A dynamic slicing algorithm for conformal additive manufacturing

Jigang Huang, Qin Qin, Cheng Wen, Zhuoxi Chen, Kunlan Huang, Xia Fang and Jie Wang

Additive Manufacturing, 2022, 51, 102622
DOI: 10.1016/j.addma.2022.102622

A 3D Printed Self-Sustainable Cell-Encapsulation Drug Delivery Device for Periocular Transplant-Based Treatment of Retinal Degenerative Diseases

Hideto Kojima, Bibek Raut, Li-Jiun Chen, Nobuhiro Nagai, Toshiaki Abe and Hirokazu Kaji

Micromachines, 2020, 11, 436
DOI: 10.3390/mi11040436

Recent advances in 3D-printing-based organ-on-a-chip

Xinkun Wu, Wenwan Shi, Xiaojiang Liu and Zhongze Gu

EngMedicine, 2024, 1, 100003
DOI: 10.1016/j.engmed.2024.100003

Recent Advances in Analytical Chemistry by 3D Printing

Bethany Gross, Sarah Y. Lockwood and Dana M. Spence

Anal. Chem., 2017, 89, 57
DOI: 10.1021/acs.analchem.6b04344

Microfluidic devices manufacturing with a stereolithographic printer for biological applications

Bastián Carnero, Carmen Bao-Varela, Ana Isabel Gómez-Varela, Ezequiel Álvarez and María Teresa Flores-Arias

Materials Science and Engineering: C, 2021, 129, 112388
DOI: 10.1016/j.msec.2021.112388

Digital Light Processing-Based 3D Printing of Cell-Seeding Hydrogel Scaffolds with Regionally Varied Stiffness

Dai Xue, Jiaxin Zhang, Yancheng Wang and Deqing Mei

ACS Biomater. Sci. Eng., 2019, 5, 4825
DOI: 10.1021/acsbiomaterials.9b00696

Maximizing interfacial bonding strength between PDMS and PMMA substrates for manufacturing hybrid microfluidic devices withstanding extremely high flow rate and high operation pressure

Tuan Ngoc Anh Vo and Pin-Chuan Chen

Sensors and Actuators A: Physical, 2022, 334, 113330
DOI: 10.1016/j.sna.2021.113330

DLP 3D Printing Meets Lignocellulosic Biopolymers: Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels

Giuseppe Melilli, Irene Carmagnola, Chiara Tonda-Turo, Fabrizio Pirri, Gianluca Ciardelli, Marco Sangermano, Minna Hakkarainen and Annalisa Chiappone

Polymers, 2020, 12, 1655
DOI: 10.3390/polym12081655

3D‐Printed Unibody Microfluidic Devices for Organ‐on‐Chip Applications

Louis Jun Ye Ong, Surasak Kasetsirikul, Laura A. Milton, Xiaolei Nie, Andrea W. Eiken, James Chirnside, Lucy‐May Gillian Young, Gregory P. Nordin and Yi‐Chin Toh

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202501056

Editors’ Choice—Review—3D Printing: An Innovative Trend in Analytical Sensing

Dalton L. Glasco, Anjaiah Sheelam, Nguyen H. B. Ho, Art Matthew Mamaril, Melissa King and Jeffrey G. Bell

ECS Sens. Plus, 2022, 1, 010602
DOI: 10.1149/2754-2726/ac5c7a

Laser printing controllable photonic-molecule microcavities

Mu-Tian Li, Zhi-Shan Hou, Qiu-Lan Huang, Su Xu and Ai-Wu Li

Optics Communications, 2020, 459, 125036
DOI: 10.1016/j.optcom.2019.125036

PBP‐based bioprinting of hydrogels for biomedical applications

Yongliang Jia, Junyu Liu, Ziwei Tan, Dongmei Luo, Xinyu Fu, Ruxia Hou, Peiwen Li, Yurou Chen and Xiangyu Wang

Journal of Polymer Science, 2023, 61, 1415
DOI: 10.1002/pol.20220772

Light-degradable hydrogels as dynamic triggers for gastrointestinal applications

Ritu Raman, Tiffany Hua, Declan Gwynne, Joy Collins, Siddartha Tamang, Jianlin Zhou, Tina Esfandiary, Vance Soares, Simo Pajovic, Alison Hayward, Robert Langer and Giovanni Traverso

Sci. Adv., 2020, 6
DOI: 10.1126/sciadv.aay0065

Biocompatible High-Resolution 3D-Printed Microfluidic Devices: Integrated Cell Chemotaxis Demonstration

Mawla Boaks, Connor Roper, Matthew Viglione, Kent Hooper, Adam T. Woolley, Kenneth A. Christensen and Gregory P. Nordin

Micromachines, 2023, 14, 1589
DOI: 10.3390/mi14081589

3D printed auto-mixing chip enables rapid smartphone diagnosis of anemia

Kimberly Plevniak, Matthew Campbell, Timothy Myers, Abby Hodges and Mei He

Biomicrofluidics, 2016, 10
DOI: 10.1063/1.4964499

Magnetically Guidable Proteinaceous Adhesive Microbots for Targeted Locoregional Therapeutics Delivery in the Highly Dynamic Environment of the Esophagus

Hyun Sun Choi, Yun Kee Jo, Gwang‐Noh Ahn, Kye Il Joo, Dong‐Pyo Kim and Hyung Joon Cha

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202104602

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches

Henry H. Hwang, Wei Zhu, Grace Victorine, Natalie Lawrence and Shaochen Chen

Small Methods, 2018, 2
DOI: 10.1002/smtd.201700277

Programmable optical window bonding enabled 3D printing of high‐resolution transparent microfluidic devices for biomedical applications

Mengguang Ye, Yuxiang Xue, Hongyu Zhao, Patricia Hazelton, Yuxuan Ji, Glen McHale and Xianfeng Chen

Droplet, 2025, 4
DOI: 10.1002/dro2.153

Characterization of 3D-Printed Moulds for Soft Lithography of Millifluidic Devices

Nurul Mohd Fuad, Megan Carve, Jan Kaslin and Donald Wlodkowic

Micromachines, 2018, 9, 116
DOI: 10.3390/mi9030116

Multiphoton Direct Laser Writing and 3D Imaging of Polymeric Freestanding Architectures for Cell Colonization

Angelo Accardo, Marie-Charline Blatché, Rémi Courson, Isabelle Loubinoux, Christophe Thibault, Laurent Malaquin and Christophe Vieu

Small, 2017, 13, 1700621
DOI: 10.1002/smll.201700621

Characterization of stereolithography 3D-printed chips with different resins and post-treatments for the culture of hiPSC-derived motor neurons

Camille Scherrer, Colman Buckley, Camille Loret, Frédéric Favreau, Vincent Kermène and Pierre-Antoine Faye

Materials Today Communications, 2026, 52, 114997
DOI: 10.1016/j.mtcomm.2026.114997

High‐Precision Stereolithography of Biomicrofluidic Devices

Alexandra P. Kuo, Nirveek Bhattacharjee, Yuan‐Sheng Lee, Kurt Castro, Yong Tae Kim and Albert Folch

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800395

A review on additive manufacturing and materials for catalytic applications: Milestones, key concepts, advances and perspectives

O.H. Laguna, P.F. Lietor, F.J. Iglesias Godino and F.A. Corpas-Iglesias

Materials & Design, 2021, 208, 109927
DOI: 10.1016/j.matdes.2021.109927

A compact LED-based projection microstereolithography for producing 3D microstructures

Ebrahim Behroodi, Hamid Latifi and Farhood Najafi

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-56044-3

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Zhiming Luo, Haoyue Zhang, Runze Chen, Hanting Li, Fang Cheng, Lijun Zhang, Jia Liu, Tiantian Kong, Yang Zhang and Huanan Wang

Microsyst Nanoeng, 2023, 9
DOI: 10.1038/s41378-023-00542-y

Nacre-inspired underwater superoleophobic films with high transparency and mechanical robustness

Wei Chen, Pengchao Zhang, Shaokang Yu, Ruhua Zang, Liming Xu, Shutao Wang, Bailiang Wang and Jingxin Meng

Nat Protoc, 2022, 17, 2647
DOI: 10.1038/s41596-022-00725-3

3D‐printing of highly translucent ORMOCER®‐based resin using light absorber for high dimensional accuracy

Carina Kolb, Nils Lindemann, Herbert Wolter and Gerhard Sextl

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.49691

Technological Advances in Tumor-On-Chip Technology: From Bench to Bedside

Santa Bērziņa, Alexandra Harrison, Valérie Taly and Wenjin Xiao

Cancers, 2021, 13, 4192
DOI: 10.3390/cancers13164192

Effect of Post-Curing Time on the Color Stability and Related Properties of a Tooth-Colored 3D-Printed Resin Material

Eun-Hyuk Lee, Jin-Soo Ahn, Young-Jun Lim, Ho-Beom Kwon and Myung-Joo Kim

SSRN Journal, 2021
DOI: 10.2139/ssrn.3944573

Towards a 3D-Printed Millifluidic Device for Investigating Cellular Processes

Jared A. Engelken, Tobias Butelmann, Fabian Tribukait-Riemenschneider and V. Prasad Shastri

Micromachines, 2024, 15, 1348
DOI: 10.3390/mi15111348

High‐Performance Materials for 3D Printing in Chemical Synthesis Applications

Frederik Kotz, Patrick Risch, Dorothea Helmer and Bastian E. Rapp

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201805982

Recent advances in UV/thermal curing silicone polymers

Bo Jiang, Xiangrong Shi, Tong Zhang and Yudong Huang

Chemical Engineering Journal, 2022, 435, 134843
DOI: 10.1016/j.cej.2022.134843

Addressing present pitfalls in 3D printing for tissue engineering to enhance future potential

Jesse K. Placone, Bhushan Mahadik and John P. Fisher

APL Bioengineering, 2020, 4
DOI: 10.1063/1.5127860

Natural/Synthetic Polymer Materials for Bioink Development

Seo Hyung Moon, Ha Neui Choi and Yun Jung Yang

Biotechnol Bioproc E, 2022, 27, 482
DOI: 10.1007/s12257-021-0418-1

A Modular Microfluidic Device via Multimaterial 3D Printing for Emulsion Generation

Qinglei Ji, Jia Ming Zhang, Ying Liu, Xiying Li, Pengyu Lv, Dongping Jin and Huiling Duan

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-22756-1

Three-Dimensional Printed Devices in Droplet Microfluidics

Jia Zhang, Qinglei Ji and Huiling Duan

Micromachines, 2019, 10, 754
DOI: 10.3390/mi10110754

3D printed microfluidics and microelectronics

Ryan D. Sochol, Eric Sweet, Casey C. Glick, Sung-Yueh Wu, Chen Yang, Michael Restaino and Liwei Lin

Microelectronic Engineering, 2018, 189, 52
DOI: 10.1016/j.mee.2017.12.010

3D Printed Microfluidics

Anna V. Nielsen, Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Annual Rev. Anal. Chem., 2020, 13, 45
DOI: 10.1146/annurev-anchem-091619-102649

Micromixer research trend of active and passive designs

Sajad Razavi Bazaz, Ali Sayyah, Amir Hossein Hazeri, Robert Salomon, Ali Abouei Mehrizi and Majid Ebrahimi Warkiani

Chemical Engineering Science, 2024, 293, 120028
DOI: 10.1016/j.ces.2024.120028

Biocompatible PEGDA Resin for 3D Printing

Chandler Warr, Jonard Corpuz Valdoz, Bryce P. Bickham, Connor J. Knight, Nicholas A. Franks, Nicholas Chartrand, Pam M. Van Ry, Kenneth A. Christensen, Gregory P. Nordin and Alonzo D. Cook

ACS Appl. Bio Mater., 2020, 3, 2239
DOI: 10.1021/acsabm.0c00055

Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties

J. Sebastián Manzano, Hsin Wang, Long Qi and Igor I. Slowing

Applied Catalysis A: General, 2020, 605, 117794
DOI: 10.1016/j.apcata.2020.117794

A practical guide to microfabrication and patterning of hydrogels for biomimetic cell culture scaffolds

Maria Tenje, Federico Cantoni, Ana María Porras Hernández, Sean S. Searle, Sofia Johansson, Laurent Barbe, Maria Antfolk and Hannah Pohlit

Organs-on-a-Chip, 2020, 2, 100003
DOI: 10.1016/j.ooc.2020.100003

Large volume nanoscale 3D printing: Nano-3DP

Andrew I.M. Greer, Emma Barbour, Marie F. Cutiongco, John M. Stormonth-Darling, Neil Convery, Rakan E. Alsaigh, Martin P.J. Lavery and Nikolaj Gadegaard

Applied Materials Today, 2020, 21, 100782
DOI: 10.1016/j.apmt.2020.100782

3D-printable electrophoretic DNA extraction microdevice for on-site bacterial DNA recovery

Kiwon Nam, Seungbeom Kim, Younseong Song, Yoo Seok Lee, Seok Jae Lee, Kyoung G. Lee and Yong Tae Kim

Sensors and Actuators Reports, 2024, 8, 100244
DOI: 10.1016/j.snr.2024.100244

Recent Developments in 3D Printing of Droplet-Based Microfluidics

Adedamola D. Aladese and Heon-Ho Jeong

BioChip J, 2021, 15, 313
DOI: 10.1007/s13206-021-00032-1

Study on the development and integration of 3D‐printed optics in small‐scale productions of single‐use cultivation vessels

Louis Maximilian Kuhnke, Johanna Sophie Rehfeld, Christian Ude and Sascha Beutel

Engineering in Life Sciences, 2022, 22, 440
DOI: 10.1002/elsc.202100131

Parylene-C Coating Protects Resin-3D-Printed Devices from Material Erosion and Prevents Cytotoxicity toward Primary Cells

Hannah B. Musgrove, Sophie R. Cook and Rebecca R. Pompano

ACS Appl. Bio Mater., 2023, 6, 3079
DOI: 10.1021/acsabm.3c00444

An Immobilized Enzyme Reactor for Spatiotemporal Control over Reaction Products

Jennifer Grant, Justin A. Modica, Juliet Roll, Paul Perkovich and Milan Mrksich

Small, 2018, 14
DOI: 10.1002/smll.201800923

Investigating the factors affecting the outcomes of the sperm sorting with microfluidic devices

Prakaidoy Ditsayabut, Watthana Pongsena, Napatporn Promsawat, Kornwipha Makbun, Pakanit Kupittayanant, Pattanaphong Janphuang and Chokchai Wanapu

Biomed. Phys. Eng. Express, 2018, 4, 065016
DOI: 10.1088/2057-1976/aadd27

Process Study on 3D Printing of Polymethyl Methacrylate Microfluidic Chips for Chemical Engineering

Zengliang Hu, Minghai Li and Xiaohui Jia

Micromachines, 2025, 16, 385
DOI: 10.3390/mi16040385

Optimizing Process Parameters in Commercial Micro‐Stereolithography for Forming Emulsions and Polymer Microparticles in Nonplanar Microfluidic Devices

Max J. Männel, Lukas Selzer, Ricardo Bernhardt and Julian Thiele

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800408

Design clues for motility and rheotaxis-based microfluidic chips for sperm sorting

Olga Smirnova, Daniil Golubchikov, Anton Murashko, Nastasia Kosheleva, Maryam Saadatmand, Peter Timashev and Anastasia Shpichka

Prog. Biomed. Eng., 2025, 7, 042004
DOI: 10.1088/2516-1091/adf92f

Digital Manufacturing of Selective Porous Barriers in Microchannels Using Multi-Material Stereolithography

Yong Kim, Kurt Castro, Nirveek Bhattacharjee and Albert Folch

Micromachines, 2018, 9, 125
DOI: 10.3390/mi9030125

Effect of build angle, resin layer thickness and viscosity on the surface properties and microbial adhesion of denture bases manufactured using digital light processing

Won-Jun Lee, Ye-Hyeon Jo, Burak Yilmaz and Hyung-In Yoon

Journal of Dentistry, 2023, 137, 104608
DOI: 10.1016/j.jdent.2023.104608

Highly Fluorinated Methacrylates for Optical 3D Printing of Microfluidic Devices

Frederik Kotz, Patrick Risch, Dorothea Helmer and Bastian Rapp

Micromachines, 2018, 9, 115
DOI: 10.3390/mi9030115

Using Stereolithographic Printing to Manufacture Monolithic Microfluidic Devices with an Extremely High Aspect Ratio

Pin-Chuan Chen, Po-Tsang Chen and Tuan Ngoc Anh Vo

Polymers, 2021, 13, 3750
DOI: 10.3390/polym13213750

Sustainable Graphene Synthesis and Analysis of Graphene-Based PLA Nanocomposites: Impacts of Polymer Functionalization and Potential Applications in Cancer Treatments

Álefe Roger Silva França, Beatriz da Silva Batista, Joel Félix Silva Diniz Filho, Rosa Maria Viana Sousa, Alan Silva de Menezes, Clenilton Costa dos Santos, Ralph Santos-Oliveira, Pedro Filho Noronha Souza, Luzeli Moreira da Silva and Luciana Magalhães Rebêlo Alencar

ACS Omega, 2025, 10, 24520
DOI: 10.1021/acsomega.5c01094

Impact of Beam Shape on Print Accuracy in Digital Light Processing Additive Manufacture

Andrew Reid and James Windmill

3D Printing and Additive Manufacturing, 2024, 11, 517
DOI: 10.1089/3dp.2022.0193

Melanin Nanoparticle-Incorporated Silk Fibroin Hydrogels for the Enhancement of Printing Resolution in 3D-Projection Stereolithography of Poly(ethylene glycol)-Tetraacrylate Bio-ink

Sungchul Shin, Hojung Kwak and Jinho Hyun

ACS Appl. Mater. Interfaces, 2018, 10, 23573
DOI: 10.1021/acsami.8b05963

Norbornene Dicarboximide: A Green Alternative for Thiol-Norbornene Photopolymers

Warrick Ma, Nathaniel Wright and Yadong Wang

ACS Macro Lett., 2024, 13, 915
DOI: 10.1021/acsmacrolett.4c00334

Impact-resistant, haze-free, 3D-printable transparent block copolymer resin via photopolymerization-induced microphase separation

Suchan Cho, Young Soo Lee, Subi Choi, Yunmi Chae, Sungmin Park, Suk-kyun Ahn and Myungeun Seo

NPG Asia Mater, 2025, 17
DOI: 10.1038/s41427-025-00618-3

Digital halftoning for printer-independent stereolithography of functionally graded materials

Guanghai Fei, Cesar Parra-Cabrera, Benzheng Xia, Kuo Zhong, Koen Clays and Rob Ameloot

Cell Reports Physical Science, 2023, 4, 101525
DOI: 10.1016/j.xcrp.2023.101525

3D printing for chemical, pharmaceutical and biological applications

Andrew J. Capel, Rowan P. Rimington, Mark P. Lewis and Steven D. R. Christie

Nat Rev Chem, 2018, 2, 422
DOI: 10.1038/s41570-018-0058-y

From Grayscale Photopolymerization 3D Printing to Functionally Graded Materials

Guanghai Fei, Cesar Parra‐Cabrera, Kuo Zhong, Koen Clays and Rob Ameloot

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202314635

Nanoporous, Gas Permeable PEGDA Ink for 3D Printing Organ‐on‐a‐Chip Devices

Vahid Karamzadeh, Molly L. Shen, Houda Shafique, Felix Lussier and David Juncker

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202315035

Additive Manufacturing of Functional Microarchitected Reactors for Energy, Environmental, and Biological Applications

Seok Kim, Do Hyeog Kim, Wonpyo Kim, Young Tae Cho and Nicholas X. Fang

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2021, 8, 303
DOI: 10.1007/s40684-020-00277-5

Cyclic Olefin Copolymer Microfluidic Devices for Forensic Applications

Brigitte Bruijns, Andrea Veciana, Roald Tiggelaar and Han Gardeniers

Biosensors, 2019, 9, 85
DOI: 10.3390/bios9030085

Micro/nanofabrication of brittle hydrogels using 3D printed soft ultrafine fiber molds for damage-free demolding

Shang Lv, Jing Nie, Qing Gao, Chaoqi Xie, Luyu Zhou, Jingjiang Qiu, Jianzhong Fu, Xin Zhao and Yong He

Biofabrication, 2020, 12, 025015
DOI: 10.1088/1758-5090/ab57d8

Fused Deposition Modeling of Chemically Resistant Microfluidic Chips in Polyvinylidene Fluoride

Christof Rein, Leonhard Hambitzer, Zahra Soraya, Han Zhang, Henning J. Jessen, Frederik Kotz-Helmer and Bastian E. Rapp

Micromachines, 2024, 15, 1391
DOI: 10.3390/mi15111391

A study on the dynamics of bacterial growth using biocompatible 3D-printed microfluidic device

Amlan Ashish, Poulomi Biswas, Brateen Datta, Chiranjeevi Kanike, Arnab Atta and Gorachand Dutta

Chemical Engineering Journal, 2024, 493, 152687
DOI: 10.1016/j.cej.2024.152687

3D Printing of Microgel‐Loaded Modular Microcages as Instructive Scaffolds for Tissue Engineering

Ramesh Subbiah, Christina Hipfinger, Anthony Tahayeri, Avathamsa Athirasala, Sivaporn Horsophonphong, Greeshma Thrivikraman, Cristiane Miranda França, Diana Araujo Cunha, Amin Mansoorifar, Albena Zahariev, James M. Jones, Paulo G. Coelho, Lukasz Witek, Hua Xie, Robert E. Guldberg and Luiz E. Bertassoni

Advanced Materials, 2020, 32
DOI: 10.1002/adma.202001736

Evaluation of flexural strength of additively manufactured resin materials compared to auto-polymerized provisional resin with and without hydrothermal aging

Kübra Aycan Tavuz, Nadin Al-Haj Husain, Kiren Jan Mätzener, Mehmet Muzaffer Ateş, Tan Fırat Eyüboğlu and Mutlu Özcan

Journal of the Mechanical Behavior of Biomedical Materials, 2025, 161, 106817
DOI: 10.1016/j.jmbbm.2024.106817

3D Printed Multimaterial Microfluidic Transistors

Alireza Ahmadianyazdi, Wei Huang, Kaustav A. Gopinathan, Ivan Stepanov, Lisa Horowitz, Ting‐Yuan Tu, Mehmet Toner and Albert Folch

Adv Materials Technologies, 2026
DOI: 10.1002/admt.202501509

Multiscale bioprinting of vascularized models

Amir K. Miri, Akbar Khalilpour, Berivan Cecen, Sushila Maharjan, Su Ryon Shin and Ali Khademhosseini

Biomaterials, 2019, 198, 204
DOI: 10.1016/j.biomaterials.2018.08.006

Effect of post-curing time on the color stability and related properties of a tooth-colored 3D-printed resin material

Eun-Hyuk Lee, Jin-Soo Ahn, Young-Jun Lim, Ho-Beom Kwon and Myung-Joo Kim

Journal of the Mechanical Behavior of Biomedical Materials, 2022, 126, 104993
DOI: 10.1016/j.jmbbm.2021.104993

A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects

Bruce K. Gale, Alexander R. Jafek, Christopher J. Lambert, Brady L. Goenner, Hossein Moghimifam, Ugochukwu C. Nze and Suraj Kumar Kamarapu

Inventions, 2018, 3, 60
DOI: 10.3390/inventions3030060

3D printing of metasurface-based dual-linear polarization converter

Gyeongyeong Lee, Yeong-Hoon Noh, In-Gon Lee, Ic-Pyo Hong, Jong-Gwan Yook, Jong-Yeong Kim and Jihoon Kim

Flex. Print. Electron., 2021, 6, 045012
DOI: 10.1088/2058-8585/ac3dff

Flexible, transparent, sub-100 µm microfluidic channels with fused deposition modeling 3D-printed thermoplastic polyurethane

Matt D Nelson, Nirupama Ramkumar and Bruce K Gale

J. Micromech. Microeng., 2019, 29, 095010
DOI: 10.1088/1361-6439/ab2f26

From Lab on a Chip to Point of Care Devices: The Role of Open Source Microcontrollers

Trieu Nguyen, Sune Zoëga Andreasen, Anders Wolff and Dang Duong Bang

Micromachines, 2018, 9, 403
DOI: 10.3390/mi9080403

3D printed versus conventionally cured provisional crown and bridge dental materials

Anthony Tahayeri, MaryCatherine Morgan, Ana P. Fugolin, Despoina Bompolaki, Avathamsa Athirasala, Carmem S. Pfeifer, Jack L. Ferracane and Luiz E. Bertassoni

Dental Materials, 2018, 34, 192
DOI: 10.1016/j.dental.2017.10.003

Photofabrication of polymeric biomicrofluidics: New insights into material selection

Erika Fantino, Alessandro Chiadò, Marzia Quaglio, Valentina Vaghi, Matteo Cocuzza, Simone L. Marasso, Cristina Potrich, Lorenzo Lunelli, Cecilia Pederzolli, Candido F. Pirri, Roberta Bongiovanni and Alessandra Vitale

Materials Science and Engineering: C, 2020, 106, 110166
DOI: 10.1016/j.msec.2019.110166

The Application of Organs-on-a-Chip in Dental, Oral, and Craniofacial Research

C. Huang, F. Sanaei, W.P.R. Verdurmen, F. Yang, W. Ji and X. F. Walboomers

J Dent Res, 2023, 102, 364
DOI: 10.1177/00220345221145555

A Review on Fluid Flow and Mixing in Microchannel and their Design and Manufacture for Microfluidic Applications

Pranjal Sarma and Promod Kumar Patowari

MNS, 2023, 15, 167
DOI: 10.2174/1876402915666230817164516

Tough PEG‐only hydrogels with complex 3D structure enabled by digital light processing of “all‐PEG” resins

Safira Noor Anindita, Riccardo Conti, Doris Zauchner, Nevena Paunović, Wanwan Qiu, Marina Green Buzhor, Adva Krivitsky, Zhi Luo, Ralph Müller, Hansjörg Grützmacher, Xiao‐Hua Qin, Jean‐Christophe Leroux and Yinyin Bao

Aggregate, 2023, 4
DOI: 10.1002/agt2.368

Multiplexed colorimetric detection of SARS-CoV-2 and other pathogens in wastewater on a 3D printed integrated microfluidic chip

Kun Yin, Xiong Ding, Zhiheng Xu, Ziyue Li, Xingyu Wang, Hui Zhao, Clifford Otis, Baikun Li and Changchun Liu

Sensors and Actuators B: Chemical, 2021, 344, 130242
DOI: 10.1016/j.snb.2021.130242

Graphene inks for the 3D printing of cell culture scaffolds and related molecular arrays

George Mihail Vlăsceanu, Horia Iovu and Mariana Ioniţă

Composites Part B: Engineering, 2019, 162, 712
DOI: 10.1016/j.compositesb.2019.01.010

Highly translucent dental resin composites through refractive index adaption using zirconium dioxide nanoparticles and organic functionalization

Carina Kolb, Katrin Gumpert, Herbert Wolter and Gerhard Sextl

Dental Materials, 2020, 36, 1332
DOI: 10.1016/j.dental.2020.07.005

Oxidation‐Degradable Resins for 3D‐Printing of Cell‐Responsive Biomaterials

Reinaldo L. Dos Santos, Wesley Wynn, Lindsey Marquez, Ejajul Hoque, Karina A. Bruce, Benjamin M. Yavitt, Greg M. Harris and John R. Martin

Adv Funct Materials, 2026, 36
DOI: 10.1002/adfm.202522208

Development of bone-mimicking resin for 3D printing with enhanced mechanical properties using ceramic filler

Wei-Chun Lin, Chia-Cheng Cheng, Jui-Fu Tang, Kuan-Chung Huang, Kevin Chiou, Ying-Ruei Liu, Yu-An Chen, Zhi-Xian Wu, Yu-Hsien Chu, Yu-Chun Huang and Wei-Chih Chen

Polymer Testing, 2025, 143, 108699
DOI: 10.1016/j.polymertesting.2025.108699

Selective Fluorination of the Surface of Polymeric Materials after Stereolithography 3D Printing

Megan A. Catterton, Alyssa N. Montalbine and Rebecca R. Pompano

Langmuir, 2021, 37, 7341
DOI: 10.1021/acs.langmuir.1c00625

Dimensional Accuracy of Different Three-Dimensional Printing Models as a Function of Varying the Printing Parameters

Christin Arnold, Lea Riß, Jeremias Hey and Ramona Schweyen

Materials, 2024, 17, 3616
DOI: 10.3390/ma17143616

Multi-step exposure method for improving structure flatness in digital light processing-based printing

Dai Xue, Yancheng Wang and Deqing Mei

Journal of Manufacturing Processes, 2019, 39, 106
DOI: 10.1016/j.jmapro.2019.02.013

Photocurable resin-silica composites with low thermal expansion for 3D printing microfluidic components onto printed circuit boards

Guanghai Fei, Lei Nie, Lipeng Zhong, Qimin Shi, Kehui Hu, Cesar Parra-Cabrera, Herman Oprins, Rob Ameloot and Shoufeng Yang

Materials Today Communications, 2022, 31, 103482
DOI: 10.1016/j.mtcomm.2022.103482

Projection-Based 3D Printing of Cell Patterning Scaffolds with Multiscale Channels

Dai Xue, Yancheng Wang, Jiaxin Zhang, Deqing Mei, Yue Wang and Shaochen Chen

ACS Appl. Mater. Interfaces, 2018, 10, 19428
DOI: 10.1021/acsami.8b03867