Enhanced biomineralization and protein adsorption capacity of 3D chitosan/hydroxyapatite biomimetic scaffolds applied for bone-tissue engineering

Nguyen Kim Nga, Lai Thi Thanh Tam, Nguyen Thu Ha, Pham Hung Viet and Tran Quang Huy

RSC Adv., 2020, 10, 43045
DOI: 10.1039/D0RA09432C

Harnessing 3D printed highly porous Ti–6Al–4V scaffolds coated with graphene oxide to promote osteogenesis

Hee Jeong Jang, Moon Sung Kang, Jinju Jang, Dohyung Lim, Seong-Won Choi, Tae-Gon Jung, Heoung-Jae Chun, Bongju Kim and Dong-Wook Han

Biomater. Sci., 2024, 12, 5491
DOI: 10.1039/D4BM00970C

Effects of surface patterning and topography on the cellular functions of tissue engineered scaffolds with special reference to 3D bioprinting

Jaideep Adhikari, Avinava Roy, Amit Chanda, Gouripriya D. A., Sabu Thomas, Manojit Ghosh, Jinku Kim and Prosenjit Saha

Biomater. Sci., 2023, 11, 1236
DOI: 10.1039/D2BM01499H

Topographical modification of titanium using diatom biosilica to promote human mesenchymal stem cell proliferation and osteogenic differentiation

Rossella Labarile, Danilo Vona, Maria Michela Giangregorio, Roberto Gristina, Vincenza Armenise, Paola Albanese, Gianluca Maria Farinola and Stefania R. Cicco

Mater. Adv., 2025, 6, 7252
DOI: 10.1039/D5MA00525F

The effect of submicron bioactive glass particles on in vitro osteogenesis

Shaoqing Liu, Weiyu Gong, Yanmei Dong, Qing Hu, Xiaofeng Chen and Xuejun Gao

RSC Adv., 2015, 5, 38830
DOI: 10.1039/C5RA03786G

The effect of the prefrozen process on properties of a chitosan/hydroxyapatite/poly(methyl methacrylate) composite prepared by freeze drying method used for bone tissue engineering

Xueqin Zhang, Yuxuan Zhang, Guiping Ma, Dongzhi Yang and Jun Nie

RSC Adv., 2015, 5, 79679
DOI: 10.1039/C5RA14549J

Comparison between mandibular and femur derived bone marrow stromal cells: osteogenic and angiogenic potentials in vitro and bone repairing ability in vivo

Wenhui Zhou, Jinkai Zhang, Kaili Lin and Fengshan Chen

RSC Adv., 2017, 7, 56220
DOI: 10.1039/C7RA07139F

Tailoring cell behaviour by surface micropatterning and interconnected porous structure of gelatin/nano-silica/PLGA 3D composite scaffold for bone tissue engineering

Nur Rofiqoh Eviana Putri, Huajian Chen, Naoki Kawazoe, Felicity R. A. J. Rose, Ricky D. Wildman and Guoping Chen

RSC Adv., 2025, 15, 28581
DOI: 10.1039/D5RA02891D

45S5 bioactive glass-based scaffolds coated with cellulose nanowhiskers for bone tissue engineering

Wei Li, Nere Garmendia, Uxua Pérez de Larraya, Yaping Ding, Rainer Detsch, Alina Grünewald, Judith A. Roether, Dirk W. Schubert and Aldo R. Boccaccini

RSC Adv., 2014, 4, 56156
DOI: 10.1039/C4RA07740G

Cell traction force in a confined microenvironment with double-sided micropost arrays

Jianan Hui and Stella W. Pang

RSC Adv., 2019, 9, 8575
DOI: 10.1039/C8RA10170A

Preparation and characteristics of cellulose nanowhisker reinforced acrylic foams synthesized by freeze-casting

Zhaoyang Xu, Qining Sun, Fang Huang, Yunqiao Pu, Shaobo Pan and Arthur J. Ragauskas

RSC Adv., 2014, 4, 12148
DOI: 10.1039/c3ra47621a

Mechanically robust cationic cellulose nanofibril 3D scaffolds with tuneable biomimetic porosity for cell culture

James C. Courtenay, Jefferson G. Filgueiras, Eduardo Ribeiro deAzevedo, Yun Jin, Karen J. Edler, Ram I. Sharma and Janet L. Scott

J. Mater. Chem. B, 2019, 7, 53
DOI: 10.1039/C8TB02482K

Topographical patterning: characteristics of current processing techniques, controllable effects on material properties and co-cultured cell fate, updated applications in tissue engineering, and improvement strategies

Ke Zhang, Xiongfu Xiao, Xiumei Wang, Yubo Fan and Xiaoming Li

J. Mater. Chem. B, 2019, 7, 7090
DOI: 10.1039/C9TB01682A

When 2D nanomaterials meet biomolecules: design strategies and hybrid nanostructures for bone tissue engineering

Yuchen Jin, Jie Zhou, Xin Zhao, Xiaoyuan Zhang and Zhiqiang Su

J. Mater. Chem. B, 2022, 10, 9040
DOI: 10.1039/D2TB01489K

In vitro and in vivo cytocompatibility of electrospun nanofiber scaffolds for tissue engineering applications

N. Goonoo, A. Bhaw-Luximon and D. Jhurry

RSC Adv., 2014, 4, 31618
DOI: 10.1039/C4RA05218H

Fabrication and characterization of fibrous HAP/PVP/PEO composites prepared by sol-electrospinning

Yuanyuan Zhou, Pengwei Qi, Zhihua Zhao, Qian Liu and Zhongjun Li

RSC Adv., 2014, 4, 16731
DOI: 10.1039/c3ra47168c

POSS-enhanced thermosensitive hybrid hydrogels for cell adhesion and detachment

Yudong Tong, Yuanhao Zhang, Yangyang Liu, Haibo Cai, Weian Zhang and Wen-Song Tan

RSC Adv., 2018, 8, 13813
DOI: 10.1039/C8RA01584H

Fabrication of 3D plotted scaffold with microporous strands for bone tissue engineering

Ji Min Seok, Thanavel Rajangam, Jae Eun Jeong, Sinyoung Cheong, Sang Min Joo, Seung Ja Oh, Heungsoo Shin, Sang-Heon Kim and Su A Park

J. Mater. Chem. B, 2020, 8, 951
DOI: 10.1039/C9TB02360G

Fiber-Templated 3D Calcium-Phosphate Scaffolds for Biomedical Applications: The Role of the Thermal Treatment Ambient on Physico-Chemical Properties

Aura-Cătălina Mocanu, Florin Miculescu, George E. Stan, Andreea-Mădălina Pandele, Mihai Alin Pop, Robert Cătălin Ciocoiu, Ștefan Ioan Voicu and Lucian-Toma Ciocan

Materials, 2021, 14, 2198
DOI: 10.3390/ma14092198

A comprehensive review of chitosan-based functional materials: From history to specific applications

Thi Sinh Vo, Pyone Pyone Chit, Vu Hoang Nguyen, Trung Hoang, Khin Moe Lwin, Tran Thi Bich Chau Vo, Byounghyun Jeon, Soobean Han, Jaehan Lee, Yunjeong Park and Kyunghoon Kim

International Journal of Biological Macromolecules, 2024, 281, 136243
DOI: 10.1016/j.ijbiomac.2024.136243

Optimal power-law fluid flow in tree-like branching networks with self-similar and uniform roughness models

João V. Fontana and Ashish Garg

Journal of Applied Physics, 2025, 137
DOI: 10.1063/5.0250971

Graphene Oxide Hybridized nHAC/PLGA Scaffolds Facilitate the Proliferation of MC3T3-E1 Cells

Chunyong Liang, Yongchao Luo, Guodong Yang, Dan Xia, Lei Liu, Xiaomin Zhang and Hongshui Wang

Nanoscale Res Lett, 2018, 13
DOI: 10.1186/s11671-018-2432-6

Strontium sintered calcium sulfate bone graft for enhancing osteogenesis in a rat femoral defect model

Ming-Kai Hsieh, Chi-Yun Wang, Chia-Jung Wu, Ying-Cen Chen, Shinn-Chih Wu, Wei-Hsing Tuan and Po-Liang Lai

Materials Today Communications, 2022, 30, 103050
DOI: 10.1016/j.mtcomm.2021.103050

Dual-Cure Dynamic Networks for Mechanophotopatterning of Surface Topography

Alexander J. Osterbaan, Marianela Trujillo-Lemon, Gabriel T. Seymour, Zachary R. Mora, Robert R. McLeod and Christopher N. Bowman

Macromolecules, 2025, 58, 1975
DOI: 10.1021/acs.macromol.4c03018

Green reduced graphene oxide functionalized 3D printed scaffolds for bone tissue regeneration

Cátia S.D. Cabral, Sónia P. Miguel, Duarte de Melo-Diogo, Ricardo O. Louro and Ilídio J. Correia

Carbon, 2019, 146, 513
DOI: 10.1016/j.carbon.2019.01.100

Biological evaluation and osteogenic potential of polyhydroxybutyrate-keratin/Al2O3 electrospun nanocomposite scaffold: A novel bone regeneration construct

Fereshte Ghafari, Saeed Karbasi, Mohamadreza Baghaban Eslaminejad, Forough Azam Sayahpour and Niloofar Kalantari

International Journal of Biological Macromolecules, 2023, 242, 124602
DOI: 10.1016/j.ijbiomac.2023.124602

Application of 3D printing technology in bone tissue engineering

Kang Ji, Yanen Wang, Qinghua Wei, Kun Zhang, Anguo Jiang, Yiwen Rao and Xianxuan Cai

Bio-des. Manuf., 2018, 1, 203
DOI: 10.1007/s42242-018-0021-2

Homogeneous organic/inorganic hybrid scaffolds with high osteoinductive activity for bone tissue engineering

Laijun Liu, Chaojing Li, Yongjie Jiao, Guansen Jiang, Jifu Mao, Fujun Wang and Lu Wang

Polymer Testing, 2020, 91, 106798
DOI: 10.1016/j.polymertesting.2020.106798

Silk scaffolds in bone tissue engineering: An overview

Promita Bhattacharjee, Banani Kundu, Deboki Naskar, Hae-Won Kim, Tapas K. Maiti, Debasis Bhattacharya and Subhas C. Kundu

Acta Biomaterialia, 2017, 63, 1
DOI: 10.1016/j.actbio.2017.09.027

Boron Nitride Based Nanobiocomposites: Design by 3D Printing for Bone Tissue Engineering

Habib Belaid, Sakthivel Nagarajan, Carole Barou, Vincent Huon, Jonathan Bares, Sébastien Balme, Philippe Miele, David Cornu, Vincent Cavaillès, Catherine Teyssier and Mikhael Bechelany

ACS Appl. Bio Mater., 2020, 3, 1865
DOI: 10.1021/acsabm.9b00965

Osteogenic Differentiation of Human Mesenchymal Stem cells in a 3D Woven Scaffold

Maria Persson, Petri P. Lehenkari, Lena Berglin, Sanna Turunen, Mikko A. J. Finnilä, Juha Risteli, Mikael Skrifvars and Juha Tuukkanen

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-28699-x

Transformative biomaterials innovations for healthcare: Quantitative insights into translation of labscale research to inventions in global landscape

Ajoy Mallik, Bejou Krishhna and Bikramjit Basu

Biomaterials Advances, 2026, 182, 214665
DOI: 10.1016/j.bioadv.2025.214665

Novel Electrospun Polylactic Acid Nanocomposite Fiber Mats with Hybrid Graphene Oxide and Nanohydroxyapatite Reinforcements Having Enhanced Biocompatibility

Chen Liu, Hoi Wong, Kelvin Yeung and Sie Tjong

Polymers, 2016, 8, 287
DOI: 10.3390/polym8080287

Fabrication of graphene/gelatin/chitosan/tricalcium phosphate 3D printed scaffolds for bone tissue regeneration applications

Huigen Lu, Xuekang Pan, Minjie Hu, Jianqiao Zhang, Yefeng Yu, Xuqi Hu and Kai Jiang

Appl Nanosci, 2021, 11, 335
DOI: 10.1007/s13204-020-01615-4

Breath figures in tissue engineering and drug delivery: State-of-the-art and future perspectives

Maria Teresa Calejo, Tanja Ilmarinen, Heli Skottman and Minna Kellomäki

Acta Biomaterialia, 2018, 66, 44
DOI: 10.1016/j.actbio.2017.11.043

Advances in synthesis of calcium phosphate crystals with controlled size and shape

Kaili Lin, Chengtie Wu and Jiang Chang

Acta Biomaterialia, 2014, 10, 4071
DOI: 10.1016/j.actbio.2014.06.017

Dual-Cross-linked Liquid Crystal Hydrogels with Controllable Viscoelasticity for Regulating Cell Behaviors

Shengyue Tang, Kun Liu, Jingsheng Chen, Yizhi Li, Mingxian Liu, Lu Lu, Changren Zhou and Binghong Luo

ACS Appl. Mater. Interfaces, 2022, 14, 21966
DOI: 10.1021/acsami.2c02689

The determinant role of fabrication technique in final characteristics of scaffolds for tissue engineering applications: A focus on silk fibroin-based scaffolds

Sanaz Khademolqorani, Hossein Tavanai, Ioannis S. Chronakis, Anja Boisen and Fatemeh Ajalloueian

Materials Science and Engineering: C, 2021, 122, 111867
DOI: 10.1016/j.msec.2021.111867

Electrospun Polyhydroxybutyrate/Hydroxyapatite Nanohybrids: Microstructure and Bone Cell Response

Mehdi Sadat-Shojai

Journal of Materials Science & Technology, 2016, 32, 1013
DOI: 10.1016/j.jmst.2016.07.007

Polyetheretherketone/poly (glycolic acid) blend scaffolds with biodegradable properties

Chenying Shuai, Ping Wu, Yancheng Zhong, Pei Feng, Chengde Gao, Wei Huang, Zhiyang Zhou, Li Chen and Cijun Shuai

Journal of Biomaterials Science, Polymer Edition, 2016, 27, 1434
DOI: 10.1080/09205063.2016.1210420

Bionic Design, Materials and Performance of Bone Tissue Scaffolds

Tong Wu, Suihuai Yu, Dengkai Chen and Yanen Wang

Materials, 2017, 10, 1187
DOI: 10.3390/ma10101187

Micro/nano replication and 3D assembling techniques for scaffold fabrication

M.J. Lima, V.M. Correlo and R.L. Reis

Materials Science and Engineering: C, 2014, 42, 615
DOI: 10.1016/j.msec.2014.05.064

Biomineralization empowers bone organoids

Mengru Zhu, Zhehao Fan, Mengshuo Chen, Ke Xu, Yingying Jiang and Jiacan Su

Biomaterials, 2026, 326, 123703
DOI: 10.1016/j.biomaterials.2025.123703

Regenerated silk fibroin loaded with natural additives: a sustainable approach towards health care

Niranjana Jaya Prakash, Xungai Wang and Balasubramanian Kandasubramanian

Journal of Biomaterials Science, Polymer Edition, 2023, 34, 1453
DOI: 10.1080/09205063.2023.2170137

Enhancing bone graft efficacy: Antibacterial and osteogenic effects of cerium‐doped biphasic calcium phosphate scaffolds

Sangita Mangaraj, Subhasmita Swain and Tapash R. Rautray

Int J Applied Ceramic Tech, 2025, 22
DOI: 10.1111/ijac.15006

Enhancement of hydrophilicity, biocompatibility and biodegradability of poly(ε-caprolactone) electrospun nanofiber scaffolds using poly(ethylene glycol) and poly(L-lactide-co-ε-caprolactone-co-glycolide) as additives for soft tissue engineering

Gajanan Kashinathrao Arbade, Juhi Srivastava, Vidisha Tripathi, Nibedita Lenka and T. Umasankar Patro

Journal of Biomaterials Science, Polymer Edition, 2020, 31, 1648
DOI: 10.1080/09205063.2020.1769799

Towards modular bone tissue engineering using Ti–Co-doped phosphate glass microspheres: cytocompatibility and dynamic culture studies

Carlotta Peticone, David De Silva Thompson, Gareth J Owens, Hae-Won Kim, Martina Micheletti, Jonathan C Knowles and Ivan Wall

J Biomater Appl, 2017, 32, 295
DOI: 10.1177/0885328217720812

Fabrication of hydroxyapatite-based scaffold and improvement of hardness by control addition of silica

Md. Kawcher Alam, Md. Sahadat Hossain, Muhammad Shahriar Bashar, Newaz Mohammed Bahadur and Samina Ahmed

Next Research, 2025, 2, 100315
DOI: 10.1016/j.nexres.2025.100315

Effect of reaction solvent on hydroxyapatite synthesis in sol–gel process

Muhammad Anwaar Nazeer, Emel Yilgor, Mustafa Baris Yagci, Ugur Unal and Iskender Yilgor

R. Soc. open sci., 2017, 4, 171098
DOI: 10.1098/rsos.171098

Potential of organ‑on‑a‑chip in advancing synthetic extracellular matrix technology for bone tissue engineering in dentistry (Review)

Muhammad Syahruddin, Ika Ana, Dmitry Belyaev, Dyah Irnawati, Hevi Wihadmadyatami, Natalia Beshchasna and Rahmi Anggraeni

Biomed Rep, 2025, 24, 1
DOI: 10.3892/br.2025.2079

Orthopaedic biomaterials: current status and future perspective

Bikramjit Basu

Materials Technology, 2014, 29
DOI: 10.1179/1066785713Z.000000000196

Short phosphate glass fiber - PLLA composite to promote bone mineralization

Priscila Melo, Emma Tarrant, Thomas Swift, Anthony Townshend, Matthew German, Ana Marina Ferreira, Piergiorgio Gentile and Kenneth Dalgarno

Materials Science and Engineering: C, 2019, 104, 109929
DOI: 10.1016/j.msec.2019.109929

Replication of Micro- and Nanofeatures in Injection Molding of Two PLA Grades with Rapid Surface-Temperature Modulation

Sara Liparoti, Vito Speranza and Roberto Pantani

Materials, 2018, 11, 1442
DOI: 10.3390/ma11081442

Double-layer coating containing doxorubicin on additively manufactured Ti6Al4V scaffolds for localized bone cancer therapy

Nasrin Karimi, Masoud Atapour, Aboozar Taherizadeh, Fatemeh Davar, Abdollah Saboori and Luca Iuliano

Journal of Drug Delivery Science and Technology, 2026, 121, 108245
DOI: 10.1016/j.jddst.2026.108245

3D-printable chitosan/silk fibroin/cellulose nanoparticle scaffolds for bone regeneration via M2 macrophage polarization

Dinesh K. Patel, Sayan Deb Dutta, Jin Hexiu, Keya Ganguly and Ki-Taek Lim

Carbohydrate Polymers, 2022, 281, 119077
DOI: 10.1016/j.carbpol.2021.119077

Anisotropic Bone Surface Topography Mimicked Chitosan/Graphene Oxide Membranes

Fatih Puza, Sabra Rostami, Birgün Özçolak‐Aslan, Sedat Odabaş, Klaus D. Jandt and Bora Garipcan

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202200777

Osteoblast responses to injectable bone substitutes of kappa-carrageenan and nano hydroxyapatite

Jazmín I. González Ocampo, Mirian M. Machado de Paula, Nicole J. Bassous, Anderson O. Lobo, Claudia P. Ossa Orozco and Thomas J. Webster

Acta Biomaterialia, 2019, 83, 425
DOI: 10.1016/j.actbio.2018.10.023

A comparative study of the polarized biphasic calcium phosphate with silver nanoparticle-doped biphasic calcium phosphate in osteoblast cell development and antibacterial efficacy

Subhasmita Swain, Sangita Mangaraj and Tapash R. Rautray

emergent mater., 2025, 8, 3141
DOI: 10.1007/s42247-025-01031-w

Synergistic Effects of Ceramic Fillers and NaOH Treatment on Bioactivity of 3D-Printed Poly(ε-caprolactone) Scaffolds for Periodontal Tissue Regeneration

João de Freitas Gomes Neto, Bruno Pinto Moura, Tainara de Paula de Lima Lima, Felippe Migliato Marega, Leonardo Alves Pinto, Pedro L. Granja, Luiz Antonio Pessan and Eduardo Henrique Backes

ACS Omega, 2026, 11, 5508
DOI: 10.1021/acsomega.5c09061

Biocompatibility and Physico-Chemical Properties of Highly Porous PLA/HA Scaffolds for Bone Reconstruction

Anna Zimina, Fedor Senatov, Rajan Choudhary, Evgeniy Kolesnikov, Natalya Anisimova, Mikhail Kiselevskiy, Polina Orlova, Natalia Strukova, Mariya Generalova, Vasily Manskikh, Alexander Gromov and Anna Karyagina

Polymers, 2020, 12, 2938
DOI: 10.3390/polym12122938

Microbial-Inspired Surface Patterning for Selective Bacterial Actions for Enhanced Performance in Microbial Fuel Cells

Babu Indira Bijimol, Bhuvanendran Revamma Sreelekshmy, Krishnan Nair Satheesh Kumar, Anjana Ratheesh, Chanassery Vinayababu Geethanjali and Sheik Muhammadhu Aboobakar Shibli

ACS Appl. Bio Mater., 2022, 5, 5394
DOI: 10.1021/acsabm.2c00760

Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment

Alok Kumar, Sourav Mandal, Srimanta Barui, Ramakrishna Vasireddi, Uwe Gbureck, Michael Gelinsky and Bikramjit Basu

Materials Science and Engineering: R: Reports, 2016, 103, 1
DOI: 10.1016/j.mser.2016.01.001

Effects of Ti6Al4V Surfaces Manufactured through Precision Centrifugal Casting and Modified by Calcium and Phosphorus Ion Implantation on Human Osteoblasts

Fiedler Jörg, Katmer Amet Betül, Michels Heiner, Kappelt Gerhard and Brenner Rolf Erwin

Metals, 2020, 10, 1681
DOI: 10.3390/met10121681

Evaluation of concentration and dispersion of functionalized carbon nanotubes in aqueous media by means of Low Field Nuclear Magnetic Resonance

Davide Porrelli, Michela Cok, Michela Abrami, Susanna Bosi, Maurizio Prato, Mario Grassi, Sergio Paoletti and Ivan Donati

Carbon, 2017, 113, 387
DOI: 10.1016/j.carbon.2016.11.025

Scaffolds for bone-tissue engineering

Seunghun S. Lee, Xiaoyu Du, Inseon Kim and Stephen J. Ferguson

Matter, 2022, 5, 2722
DOI: 10.1016/j.matt.2022.06.003

Pulsed laser deposition of magnesium-containing bioactive glass film on porous Ti–6Al–4V substrate pretreated by micro-arc oxidation

J. Ma, C.Z. Wang, C.L. Ban, C.Z. Chen and H.M. Zhang

Vacuum, 2016, 125, 48
DOI: 10.1016/j.vacuum.2015.12.005

Influence of Ceramic Particles Size and Ratio on Surface—Volume Features of the Naturally Derived HA-Reinforced Filaments for Biomedical Applications

Aura-Cătălina Mocanu, Florin Miculescu, Cătălina-Andreea Dascălu, Ștefan Ioan Voicu, Mădălina-Andreea Pandele, Robert-Cătălin Ciocoiu, Dan Batalu, Sorina Dondea, Valentina Mitran and Lucian-Toma Ciocan

JFB, 2022, 13, 199
DOI: 10.3390/jfb13040199

Simulated Body Fluid Nucleation of Three-Dimensional Printed Elastomeric Scaffolds for Enhanced Osteogenesis

Nathan J. Castro, Wilhelmina Nanrui Tan, Charlie Shen and Lijie Grace Zhang

Tissue Engineering Part A, 2016, 22, 940
DOI: 10.1089/ten.tea.2016.0161

Stem cell delivery systems inspired by tissue-specific niches

Young Chan Choi, Ji Suk Choi, Chang Hee Woo and Yong Woo Cho

Journal of Controlled Release, 2014, 193, 42
DOI: 10.1016/j.jconrel.2014.06.032

Biopolymer-coated magnesium-alloy-based multi-functional bio-nanocomposite scaffolds

Adithya Garimella, Darshan Rathi, Rajesh Jangid, Deepak Khare, Ashutosh Kumar Dubey, Subrata Bandhu Ghosh and Sanchita Bandyopadhyay-Ghosh

Materials Technology, 2024, 39
DOI: 10.1080/10667857.2024.2390291

Biocompatibility and Clinical Application of Porous TiNi Alloys Made by Self-Propagating High-Temperature Synthesis (SHS)

Yuri Yasenchuk, Ekaterina Marchenko, Victor Gunther, Andrey Radkevich, Oleg Kokorev, Sergey Gunther, Gulsharat Baigonakova, Valentina Hodorenko, Timofey Chekalkin, Ji-hoon Kang, Sabine Weiss and Aleksei Obrosov

Materials, 2019, 12, 2405
DOI: 10.3390/ma12152405

Osteochondral Tissue Engineering Dilemma: Scaffolding Trends in Regenerative Medicine

Faiza Ramzan, Asmat Salim and Irfan Khan

Stem Cell Rev and Rep, 2023, 19, 1615
DOI: 10.1007/s12015-023-10545-x

Effect of the processing parameters on surface, physico-chemical and mechanical features of bioceramics synthesized from abundant carp fish bones

Andreea Maidaniuc, Florin Miculescu, Robert Cătălin Ciocoiu, Tudor Mihai Butte, Iuliana Pasuk, George E. Stan, Stefan Ioan Voicu and Lucian Toma Ciocan

Ceramics International, 2020, 46, 10159
DOI: 10.1016/j.ceramint.2020.01.007

Hydrogels with Lotus Leaf Topography: Investigating Surface Properties and Cell Adhesion

Miriem Santander-Borrego, Elena Taran, Audra M. A. Shadforth, Andrew K. Whittaker, Traian V. Chirila and Idriss Blakey

Langmuir, 2017, 33, 485
DOI: 10.1021/acs.langmuir.6b03547

Integrating Micro- and Nanostructured Platforms and Biological Drugs to Enhance Biomaterial-Based Bone Regeneration Strategies

Syed Ahmed Shah, Muhammad Sohail, Paweł Nakielski, Chiara Rinoldi, Seyed Shahrooz Zargarian, Alicja Kosik-Kozioł, Yasamin Ziai, Mohammad Ali Haghighat Bayan, Anna Zakrzewska, Daniel Rybak, Magdalena Bartolewska and Filippo Pierini

Biomacromolecules, 2025, 26, 140
DOI: 10.1021/acs.biomac.4c01133

Surface modification of orthopedic implants by optimized fluorine-substituted hydroxyapatite coating: Enhancing corrosion behavior and cell function

Mojtaba Mansoorianfar, Mostafa Mansourianfar, Mohammadhossein Fathi, Shahin Bonakdar, Mohsen Ebrahimi, Ehsan Mohammadi Zahrani, Akbar Hojjati-Najafabadi and Dagang Li

Ceramics International, 2020, 46, 2139
DOI: 10.1016/j.ceramint.2019.09.197

Amino acid surface modified bioglass: A candidate biomaterial for bone tissue engineering1

Yasin Özkabadayı, Mustafa Türk, Ali Kumandaş and Siyami Karahan

Microscopy Res & Technique, 2025, 88, 26
DOI: 10.1002/jemt.24659

Silk fibroin-derived electrospun materials for biomedical applications: A review

Francisco Vieira dos Santos, Renato Luiz Siqueira, Lucas de Morais Ramos, Sérgio Akinobu Yoshioka, Márcia Cristina Branciforti and Daniel Souza Correa

International Journal of Biological Macromolecules, 2024, 254, 127641
DOI: 10.1016/j.ijbiomac.2023.127641

FLIP: Transforming Consumer Projectors into Maskless Microscale Photopatterning Tools via Fresnel Lens Integration

Sridaran Rajagopal, Sofia Arshavsky‐Graham and Govind Kaigala

Adv Materials Technologies, 2026, 11
DOI: 10.1002/admt.202501123

Protein adsorption on nano-patterned hydrogenated amorphous carbon model surfaces

Muhammad Zeeshan Mughal, Patrick Lemoine, Gennady Lubarsky and Paul Damian Maguire

Materials & Design, 2016, 97, 239
DOI: 10.1016/j.matdes.2016.02.043

Implantable Dental Barrier Membranes as Regenerative Medicine in Dentistry: A Comprehensive Review

Siyuan Chen, Zhenzhen Wu, Ziqi Huang, Chao Liang and Sang Jin Lee

Tissue Eng Regen Med, 2025, 22, 527
DOI: 10.1007/s13770-025-00704-1

3D Printing of Polycaprolactone–Polyaniline Electroactive Scaffolds for Bone Tissue Engineering

Arie Wibowo, Cian Vyas, Glen Cooper, Fitriyatul Qulub, Rochim Suratman, Andi Isra Mahyuddin, Tatacipta Dirgantara and Paulo Bartolo

Materials, 2020, 13, 512
DOI: 10.3390/ma13030512

Step‐Gradient Composite Hydrogels for Local Drug Delivery and Directed Cell Migration

Andisheh Motealleh and Nermin S. Kehr

Advanced NanoBiomed Research, 2021, 1
DOI: 10.1002/anbr.202000114

3D printed step‐gradient composite hydrogels for directed migration and osteogenic differentiation of human bone marrow‐derived mesenchymal stem cells

Andisheh Motealleh, Alicia Schulten and Nermin S. Kehr

Nano Select, 2022, 3, 411
DOI: 10.1002/nano.202100113

Bioactive glass with biocompatible polymers for bone applications

Janhavi Sonatkar and Balasubramanian Kandasubramanian

European Polymer Journal, 2021, 160, 110801
DOI: 10.1016/j.eurpolymj.2021.110801

Biocompatibility and mechanical behaviour of three-dimensional scaffolds for biomedical devices: process–structure–property paradigm

A. Kumar, K. C. Nune, L. E. Murr and R. D. K. Misra

International Materials Reviews, 2016, 61, 20
DOI: 10.1080/09506608.2015.1128310

Fabrication and In Vitro Drug Delivery Evaluation of Cephalexin Monohydrate-Loaded PLA:PVA/HAP:TiO2 Fibrous Scaffolds for Bone Regeneration

Rama Murugapandian, Simona Clement and Vijayalakshmi Uthirapathy

ACS Omega, 2023, 8, 5017
DOI: 10.1021/acsomega.2c07701

Landscape of scaffolds from advanced synthesis to tissue engineering

Maitri Chakraborty and Arikketh Devi

Materials Today Chemistry, 2024, 40, 102258
DOI: 10.1016/j.mtchem.2024.102258

3D Printing and Performance Study of Porous Artificial Bone Based on HA-ZrO2-PVA Composites

Hongling Bie, Honghao Chen, Lijun Shan, C. Y. Tan, M. S. H. Al-Furjan, S. Ramesh, Youping Gong, Y. F. Liu, R. G. Zhou, Weibo Yang and Honghua Wang

Materials, 2023, 16, 1107
DOI: 10.3390/ma16031107

Structural Functions of 3D‐Printed Polymer Scaffolds in Regulating Cell Fates and Behaviors for Repairing Bone and Nerve Injuries

Tongling Zhang, Wenpeng Shan, Marie Le Dot and Pu Xiao

Macromol. Rapid Commun., 2024
DOI: 10.1002/marc.202400293

Influence of Post-Deposition Thermal Treatments on the Morpho-Structural, and Bonding Strength Characteristics of Lithium-Doped Biological-Derived Hydroxyapatite Coatings

L. Duta, G. E. Stan, G. Popescu-Pelin, I. Zgura, M. Anastasescu and F. N. Oktar

Coatings, 2022, 12, 1883
DOI: 10.3390/coatings12121883

Preparation of Diatom-Doped Bio-Nanocomposite Materials for Bone Tissue Scaffolds

Dicle Erden Gönenmiş and Yusuf Özcan

Mat. Res., 2022, 25
DOI: 10.1590/1980-5373-mr-2022-0234