Issue 73, 2014

Mass production of Li4Ti5O12 with a conductive network via in situ spray pyrolysis as a long cycle life, high rate anode material for lithium ion batteries

Abstract

Nanocrystalline Li4Ti5O12 with in situ incorporation of carbon and Ti3+ was synthesized by industry scalable in situ spray pyrolysis, producing crystal sizes ranging from 10 to 30 nm. Subsequent annealing in N2 preserved a proportion of the carbon from the precursor organic salts, predominantly on the Li4Ti5O12 grain boundaries, where it formed a conductive network. Such a situation would be expected to inhibit the growth of the primary Li4Ti5O12 crystals. The molecular-level uniformity of the precursor allows synthesis of Li4Ti5O12 with a significantly shorter heat treatment compared to conventional solid state reaction, which in turn saves energy during large-scale production. Notably, both the nanosized particles and the in situ incorporation of carbon and Ti3+ improve the rate capability. In rate capability measurements, stable and high capacity retention was observed from 0.5 C to 30 C. Spray pyrolyzed Li4Ti5O12 delivered a discharge capacity of 145.8 mA h gāˆ’1 at 10 C for up to 500 cycles. In the full battery tests with Li(Co0.16Mn1.84)O4 as cathode, it also showed excellent capacity and cycling stability, further indicating that spray pyrolyzed Li4Ti5O12 is a promising anode material for high power batteries.

Graphical abstract: Mass production of Li4Ti5O12 with a conductive network via in situ spray pyrolysis as a long cycle life, high rate anode material for lithium ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
06 Jun 2014
Accepted
15 Aga 2014
First published
15 Aga 2014

RSC Adv., 2014,4, 38568-38574

Author version available

Mass production of Li4Ti5O12 with a conductive network via in situ spray pyrolysis as a long cycle life, high rate anode material for lithium ion batteries

G. Du, B. R. Winton, I. M. Hashim, N. Sharma, K. Konstantinov, M. V. Reddy and Z. Guo, RSC Adv., 2014, 4, 38568 DOI: 10.1039/C4RA05178E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements