Issue 45, 2019

Tailoring the electrocaloric effect of Pb0.78Ba0.2La0.02ZrO3 relaxor thin film by GaN substrates

Abstract

The electrocaloric (EC) effect in ferroelectric/antiferroelectric thin films has been widely investigated due to its potential applications in solid state cooling devices. It is demonstrated that the EC effect of the Pb0.78Ba0.2La0.02ZrO3 (PBLZ) relaxor thin films prepared by using a sol–gel method strongly depends on the substrates. The maximum ΔT of PBLZ thin films deposited on Pt(111)/TiOx/SiO2/Si(100) (Pt), LaNiO3/Pt(111)/TiOx/SiO2/Si(100) (LaNiO3/Pt), LaNiO3/n-type GaN (LaNiO3/n-GaN) and LaNiO3/p-type GaN (LaNiO3/p-GaN) substrates is ∼13.08 K, 16.46 K, 18.70 K, and 14.64 K, respectively. Moreover, negative EC effects in a broad temperature range (∼340 K to 440 K) could be obtained in the thin films deposited on LaNiO3/n-GaN and LaNiO3/p-GaN substrates, which is ascribed to higher proportions of orthorhombic antiferroelectric phase to rhombohedral ferroelectric phase induced by the GaN substrates. These results indicate that tailoring the EC effects by changing the substrates could provide a new strategy in designing an EC cooling device with high cooling efficiency.

Graphical abstract: Tailoring the electrocaloric effect of Pb0.78Ba0.2La0.02ZrO3 relaxor thin film by GaN substrates

Supplementary files

Article information

Article type
Paper
Submitted
22 Sep 2019
Accepted
24 Okt 2019
First published
06 Nov 2019

J. Mater. Chem. C, 2019,7, 14109-14115

Tailoring the electrocaloric effect of Pb0.78Ba0.2La0.02ZrO3 relaxor thin film by GaN substrates

B. Peng, J. Jiang, S. Tang, M. Zhang, L. Liu, B. Zou, G. J. T. Leighton, C. Shaw, N. Luo, Q. Zhang and W. Sun, J. Mater. Chem. C, 2019, 7, 14109 DOI: 10.1039/C9TC05208A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements