Issue 19, 2018

Anion conducting multiblock copolymers with multiple head-groups

Abstract

Multiblock copoly(arylene ether)s with 1, 2, 3 and 4 alkyl chain tethered quaternary ammonium head-groups on each hydrophilic repeat unit were synthesized via polycondensation, Friedel–Crafts, and reduction reactions. The effect of the number of ionic groups on the ion exchange capacity (IEC), morphology and properties of the anion exchange membranes was investigated. As the ionic group density increased, both the ionic conductivity and water uptake of the membranes increased. The 3-tether membrane formed the most efficient ionic channels as determined by the highest ionic conductivity/IEC. The 2, 3, and 4-tether (per hydrophilic repeat unit) membranes had 9 to 10 bound waters of hydration per ionic group pair, however, the amount of unbound, freezable water molecules increased with the number of ion pairs per polymer repeat unit. The unbound, freezable water molecule was unproductive and led to lower ionic conductivity/IEC ratio, such as in the 4-tether membrane. The optimal membrane had three head-groups per hydrophilic repeat unit (X3Y5-3): 130.6 mS cm−1 ionic conductivity at 80 °C, 58.3% water uptake, and an IEC of 1.83 meq g−1. All the membranes showed acceptable thermal stability and alkaline stability in 1 M KOH at 60 °C for 1000 h. As the number of head-groups per hydrophilic repeat unit increased, the mechanical strength of the membranes decreased.

Graphical abstract: Anion conducting multiblock copolymers with multiple head-groups

Article information

Article type
Paper
Submitted
23 Jan 2018
Accepted
28 Mas 2018
First published
30 Eph 2018

J. Mater. Chem. A, 2018,6, 9000-9008

Author version available

Anion conducting multiblock copolymers with multiple head-groups

L. Liu, G. Huang and P. A. Kohl, J. Mater. Chem. A, 2018, 6, 9000 DOI: 10.1039/C8TA00753E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements