Issue 38, 2017

A PEO-based gel polymer electrolyte for lithium ion batteries

Abstract

A lithium-ion conducting gel polymer electrolyte (GPE) membrane containing PEO as a polymer host and liquid electrolyte has been prepared by a simple one-step procedure. The prepared electrolyte membrane exhibits a good ionic conductivity of 3.3 × 10−3 S cm−1 and high lithium transference number of 0.76 at room temperature. Meanwhile, the gel polymer electrolyte membrane shows very good thermal stability. A Li/GPE/LiFeO4 cell was fabricated to demonstrate the electrochemical performance of the GPE. The cell exhibits good cycling stability with a high capacity retention of 81% after 500 cycles and as good a rate performance as LiFeO4 tested in liquid electrolyte.

Graphical abstract: A PEO-based gel polymer electrolyte for lithium ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
02 Mas 2017
Accepted
14 Eph 2017
First published
28 Eph 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 23494-23501

A PEO-based gel polymer electrolyte for lithium ion batteries

W. Li, Y. Pang, J. Liu, G. Liu, Y. Wang and Y. Xia, RSC Adv., 2017, 7, 23494 DOI: 10.1039/C7RA02603J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements