Issue 4, 2016

Antibacterial properties of Cu–ZrO2 thin films prepared via aerosol assisted chemical vapour deposition

Abstract

The antibacterial properties of a Cu–ZrO2 film grown via aerosol assisted chemical vapour deposition are presented. The composite film showed high activity against E. coli (Gram-negative) and S. aureus (Gram-positive) bacteria with 5 log10 (E. coli) and 4 log10 (S. aureus) decrease in viable bacteria achieved within 20 and 60 minutes respectively. These results were comparable to a pure copper film that was prepared under the same conditions. The composite film was characterized for material properties using a range of techniques including X-ray photoemission and X-ray diffraction.

Graphical abstract: Antibacterial properties of Cu–ZrO2 thin films prepared via aerosol assisted chemical vapour deposition

Supplementary files

Article information

Article type
Paper
Submitted
05 Nov 2015
Accepted
11 Dis 2015
First published
16 Dis 2015

J. Mater. Chem. B, 2016,4, 666-671

Author version available

Antibacterial properties of Cu–ZrO2 thin films prepared via aerosol assisted chemical vapour deposition

A. M. Alotaibi, S. Sathasivam, S. P. Nair and I. P. Parkin, J. Mater. Chem. B, 2016, 4, 666 DOI: 10.1039/C5TB02312B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements