Issue 7, 2014

Large pore raspberry textured phosphonate@silica nanoparticles for protein immobilization

Abstract

This paper reports the synthesis of large pore (11 nm) monodisperse raspberry textured phosphonate@silica nanoparticles (70–90 nm) with high capacity for protein immobilization. The raspberry nanoparticles denoted RNP_PME(2.5) with phosphonate loading 2.5 mmol g−1, formed using an organosilanephosphonate (MeO)3SiCH2CH2PO(OMe)2, as silica surface modifier and structure directing agent. Specific reaction conditions including temperature and concentration of phosphonate, base, surfactant and co-solvent were required for RNP_PME(2.5) formation. Rhodamine B labelled RNP_PME(2.5) was readily internalised by HeLa cells with no deficit of cell viability. Aqueous dispersions of RNP_PME(2.5) were stable over several months. In protein immobilization studies using BSA, bovine serum albumin, with RNP_PME(2.5), smaller pore (∼3 nm) phosphonate@silica nanoparticles NP_PME(1.0) and NP_PME(0.2) and mesoporous silica nanoparticles, MSN, the large pore RNP_PME(2.5) gave highest BSA loading 266 mg g−1, formed the most stable aqueous dispersions (BSA@MSN was unstable and precipitated) and gave the best protection against BSA structural distortion at pH 7.4.

Graphical abstract: Large pore raspberry textured phosphonate@silica nanoparticles for protein immobilization

Supplementary files

Article information

Article type
Paper
Submitted
13 Sep 2013
Accepted
16 Dis 2013
First published
24 Dis 2013

J. Mater. Chem. B, 2014,2, 903-914

Large pore raspberry textured phosphonate@silica nanoparticles for protein immobilization

S. P. Maddala, D. Velluto, Z. Luklinska and A. C. Sullivan, J. Mater. Chem. B, 2014, 2, 903 DOI: 10.1039/C3TB21263G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements