Issue 79, 2014

Enhancing the lithiation rate of silicon nanowires by the inclusion of tin

Abstract

Silicon (Si) has a very high lithium storage capacity and is being explored as a negative electrode material in lithium-ion batteries (LIBs). Si nanowires can exhibit relatively stable performance for many cycles of charging; however, conductive carbon must often be added to the electrode layer to improve the rate capability due to the relatively low electrical conductivity of Si. The added carbon lowers the capacity of the electrode. Here, we show that the rate capability of Si in LIBs can be substantially enhanced by incorporating tin (Sn) into Si nanowires. The solubility of Sn in Si is very low (0.015 at%); yet, Sn used as a seed for supercritical fluid–liquid–solid (SFLS) growth can be trapped in Si nanowires with relatively high concentration (10 at%). Such Sn-containing Si nanowires and no added conductive carbon in the electrode layer, could be cycled in LIBs with high capacity (∼1000 mA h g−1 over 100 cycles) at a current density of 2.8 A g−1 (1 C). Capacities exceeding that of graphite could still be reached at cycle rates as high as 2 C. Real-time in situ transmission electron microscopy (TEM) revealed that lithiation occurs five times faster in Si nanowires with significant amounts of Sn than in the Si nanowires without Sn, and twice as fast as in nanowires that were coated with carbon.

Graphical abstract: Enhancing the lithiation rate of silicon nanowires by the inclusion of tin

Supplementary files

Article information

Article type
Paper
Submitted
22 Jul 2014
Accepted
27 Aga 2014
First published
28 Aga 2014

RSC Adv., 2014,4, 42022-42028

Enhancing the lithiation rate of silicon nanowires by the inclusion of tin

T. D. Bogart, X. Lu, M. Gu, C. Wang and B. A. Korgel, RSC Adv., 2014, 4, 42022 DOI: 10.1039/C4RA07418A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements