Issue 8, 2021

Order-disorder transition-induced band nestification in AgBiSe2–CuBiSe2 solid solutions for superior thermoelectric performance

Abstract

Despite the fact that research into most high-performance thermoelectric (TE) materials is focused on tellurides, compelling demand has arisen to replace tellurium (Te) with selenium (Se) due to the scarcity of Te. Silver bismuth diselenide (AgBiSe2, ABS) has been widely studied in relation to thermoelectric applications due to its intrinsically low thermal conductivity. However, its low power factor (PF) has been considered as an underlying issue preventing improvements of the TE properties of ABS. Here, it is demonstrated that a high PF can be achieved by incorporating Cu into the ABS system via the nestification of conduction bands when a disordering between Ag and Bi occurs. Degenerate electronic bands simultaneously increase the density-of-states effective mass and carrier concentration while not reducing the carrier mobility significantly. Therefore, improved TE performance with a maximum PF of 8.2 μW cm−1 K−2 and a peak zT value of 1.14 was achieved at 773 K, opening a new horizon for the development of environmentally benign TE materials with high performance capabilities.

Graphical abstract: Order-disorder transition-induced band nestification in AgBiSe2–CuBiSe2 solid solutions for superior thermoelectric performance

Supplementary files

Article information

Article type
Communication
Submitted
29 Aga 2020
Accepted
30 Nov 2020
First published
08 Dis 2020

J. Mater. Chem. A, 2021,9, 4648-4657

Order-disorder transition-induced band nestification in AgBiSe2–CuBiSe2 solid solutions for superior thermoelectric performance

H. Jang, S. Abbey, W. H. Nam, B. Frimpong, C. V. Nguyen, S. Joo, H. S. Shin, J. Y. Song, E. N. Cho, M. Kim, Y. S. Jung and M. Oh, J. Mater. Chem. A, 2021, 9, 4648 DOI: 10.1039/D0TA08484K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements