Issue 46, 2021

MoS2 stacking matters: 3R polytype significantly outperforms 2H MoS2 for the hydrogen evolution reaction

Abstract

Transition metal dichalcogenides (TMDs) are an intriguing family of materials with large application potential in a variety of scientific fields ranging from electronics to electrocatalysis. Within this group of materials, MoS2 has been attracting a lot of scientific attention due to its chemical and physical properties. In this report, we studied the exfoliation of the largely unexplored 3R MoS2 polytype prepared by high-temperature, high-pressure synthesis. Bulk as well as sodium naphthalenide exfoliated materials were studied in terms of their quality and performance for the hydrogen evolution reaction (HER). The HER performance was benchmarked versus the commonly available 2H polytype. The reported results show that the 3R polytype is more suitable for the conversion of MoS2 into the metallic 1T phase, which was attributed to surface oxidation occurring in the 2H polytype. Higher content of the 1T phase then resulted in an overall lower overpotential of −0.25 V vs. RHE for the 3R polytype compared with the overpotential of −0.30 V for the 2H polytype. These results show that the 3R polytype might serve as a better starting point for the synthesis of highly active chemically exfoliated MoS2 catalysts for hydrogen evolution.

Graphical abstract: MoS2 stacking matters: 3R polytype significantly outperforms 2H MoS2 for the hydrogen evolution reaction

Supplementary files

Article information

Article type
Paper
Submitted
22 Mey 2021
Accepted
17 Aga 2021
First published
18 Aga 2021

Nanoscale, 2021,13, 19391-19398

MoS2 stacking matters: 3R polytype significantly outperforms 2H MoS2 for the hydrogen evolution reaction

J. Luxa, L. Spejchalová, I. Jakubec and Z. Sofer, Nanoscale, 2021, 13, 19391 DOI: 10.1039/D1NR03284D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements