Issue 4, 2022

Tuning the efficiency and product composition for electrocatalytic CO2 reduction to syngas over zinc films by morphology and wettability

Abstract

Electrochemical reaction of CO2 and water to produce valuable chemicals and fuels is of great importance. Producing syngas with tunable CO/H2 ratios and high current density is an interesting topic. In this work, Zn films with different morphologies and wettability were fabricated. It was demonstrated that Zn films could be used as efficient electrocatalysts for CO2 reduction to syngas and the CO/H2 ratios could be controlled in the range of 0.09–11.4 changing the morphology and wettability of the catalysts and the applied potential. Particularly, using the nanoleaf Zn film with a water contact angle of 91° as the electrode, the current density could reach 90.4 mA cm−2 with a CO/H2 ratio of 1/1 at −1.27 V vs. RHE. In addition, the maximum FE of CO could reach 92.6% with a current density of 35.3 mA cm−2 at a low overpotential of 440 mV. Detailed studies reveal that the three-dimensional electrode architecture and suitable wettability were favorable for CO2/H+ mass transfer and charge transfer, which are important factors for achieving efficiency.

Graphical abstract: Tuning the efficiency and product composition for electrocatalytic CO2 reduction to syngas over zinc films by morphology and wettability

Supplementary files

Article information

Article type
Communication
Submitted
23 11月 2021
Accepted
21 1月 2022
First published
22 1月 2022

Green Chem., 2022,24, 1439-1444

Tuning the efficiency and product composition for electrocatalytic CO2 reduction to syngas over zinc films by morphology and wettability

P. Li, J. Liu, J. Bi, Q. Zhu, T. Wu, J. Ma, F. Zhang, J. Jia and B. Han, Green Chem., 2022, 24, 1439 DOI: 10.1039/D1GC04364A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements