Issue 3, 2019

Scalable fabrication of a complementary logic inverter based on MoS2 fin-shaped field effect transistors

Abstract

Integration of high performance n-type and p-type field-effect transistors with complementary device operation in the same kind of layered materials is highly desirable for pursuing low power and flexible next-generation electronics. In this work, we have shown a well-mannered growth of MoS2 on a fin-shaped oxide structure and integration of both n-type and p-type MoS2 by using a traditional implantation technique. With the advance of the fin-shaped structure, the maxima and the effective ON current density for the MoS2 fin-shaped field-effect transistors are respectively obtained to be about 50 μA μm−1 (normalized by the circumference of the fin) and around 500 μA μm−1 (only normalized by the fin size), while its ON/OFF ratio is more than 106 with low OFF current of a few pA. Based on our n-type and p-type MoS2 fin-shaped field-effect transistors, the complementary MoS2 inverter with a high DC voltage gain of more than 20 is acquired. Our results provide evidence for complementary 2D material operation in the same materials, a promising avenue for the development of high performance and high-density complementary 2D electronic devices.

Graphical abstract: Scalable fabrication of a complementary logic inverter based on MoS2 fin-shaped field effect transistors

Supplementary files

Article information

Article type
Communication
Submitted
17 11月 2018
Accepted
07 1月 2019
First published
07 1月 2019

Nanoscale Horiz., 2019,4, 683-688

Scalable fabrication of a complementary logic inverter based on MoS2 fin-shaped field effect transistors

Y. Lan, P. Chen, Y. Lin, M. Li, L. Li, Y. Tu, F. Yang, M. Chen and K. Li, Nanoscale Horiz., 2019, 4, 683 DOI: 10.1039/C8NH00419F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements