Issue 13, 2018

Layer-by-layer assembly of MXene and carbon nanotubes on electrospun polymer films for flexible energy storage

Abstract

Free-standing, highly flexible and foldable supercapacitor electrodes were fabricated through the spray-coating assisted layer-by-layer assembly of Ti3C2Tx (MXene) nanoflakes together with multi-walled carbon nanotubes (MWCNTs) on electrospun polycaprolactone (PCL) fiber networks. The open structure of the PCL network and the use of MWCNTs as spacers not only limit the restacking of Ti3C2Tx flakes but also increase the accessible surface of the active materials, facilitating fast diffusion of electrolyte ions within the electrode. Composite electrodes have areal capacitance (30–50 mF cm−2) comparable to other templated electrodes reported in the literature, but showed significantly improved rate performance (14–16% capacitance retention at a scan rate of 100 V s−1). Furthermore, the composite electrodes are flexible and foldable, demonstrating good tolerance against repeated mechanical deformation, including twisting and folding. Therefore, these tens of micron thick fiber electrodes will be attractive for applications in energy storage, electroanalytical chemistry, brain electrodes, electrocatalysis and other fields, where flexible freestanding electrodes with an open and accessible surface are highly desired.

Graphical abstract: Layer-by-layer assembly of MXene and carbon nanotubes on electrospun polymer films for flexible energy storage

Supplementary files

Article information

Article type
Paper
Submitted
12 1月 2018
Accepted
19 2月 2018
First published
15 3月 2018

Nanoscale, 2018,10, 6005-6013

Author version available

Layer-by-layer assembly of MXene and carbon nanotubes on electrospun polymer films for flexible energy storage

Z. Zhou, W. Panatdasirisuk, T. S. Mathis, B. Anasori, C. Lu, X. Zhang, Z. Liao, Y. Gogotsi and S. Yang, Nanoscale, 2018, 10, 6005 DOI: 10.1039/C8NR00313K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements