Issue 4, 2016

Towards an improved process for hydrogen production: the chemical-loop reforming of ethanol

Abstract

M-modified ferrospinels with the formula M0.6Fe2.4Oy (M = Co, Mn or Co/Mn) were employed as ionic oxygen and electron carrier materials for an alternative sustainable route to produce hydrogen via chemical-loop reforming of ethanol. The new materials were tested in terms of both redox properties and catalytic activity to generate hydrogen by oxidation with steam, after a reductive step carried out with ethanol. In addition, the research includes in situ DRIFTS and in situ XPS studies that allowed the extraction of information at the molecular level and following surface changes within the reduction/re-oxidation processes during ethanol chemical-loop reforming. It was found that Co(II)-incorporation in spinels effectively improves decomposition/oxidation of ethanol, however a greater amount of coke is accumulated. On the other hand, addition of Mn(II) into the system helps to significantly reduce the amount of coke and hence to avoid fast deactivation of the material. Thus, the behavior of Co0.3Mn0.3Fe2.4Oy was shown to be the most promising one, as this material forms less coke during the reduction step, and consequently less COx is generated during the re-oxidation step with water, nevertheless a high hydrogen yield is maintained.

Graphical abstract: Towards an improved process for hydrogen production: the chemical-loop reforming of ethanol

Supplementary files

Article information

Article type
Paper
Submitted
09 9月 2015
Accepted
30 9月 2015
First published
01 10月 2015

Green Chem., 2016,18, 1038-1050

Towards an improved process for hydrogen production: the chemical-loop reforming of ethanol

O. Vozniuk, S. Agnoli, L. Artiglia, A. Vassoi, N. Tanchoux, F. Di Renzo, G. Granozzi and F. Cavani, Green Chem., 2016, 18, 1038 DOI: 10.1039/C5GC02139A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements