Issue 39, 2016

An efficient perovskite solar cell with symmetrical Zn(ii) phthalocyanine infiltrated buffering porous Al2O3 as the hybrid interfacial hole-transporting layer

Abstract

A new Zn(II) phthalocyanine (Pc) based low bandgap HTM is introduced for perovskite solar cells. Steady state and time-resolved photoluminescence (PL) measurements indicated an evenly matched hole extraction efficiency between sym-HTPcH and spiro-OMeTAD. On account of the low film quality and resulting high recombination, Zn(II) Pc normally cannot work as an effective HTM. We adopted insulating Al2O3 for the infiltration of sym-HTPcH to form a hybrid interfacial buffer layer, affording perovskite solar cells (PSCs) with an average PCE value of up to 12.3%, which is a significant improvement with respect to the control cell without the meso-Al2O3 layer (4.21%) and is the highest value ever reported for Zn(II) phthalocyanine based devices under AM1.5G standard conditions. A hysteresis test revealed that our device structure with the new HTM exhibited a balanced charge extraction behaviour.

Graphical abstract: An efficient perovskite solar cell with symmetrical Zn(ii) phthalocyanine infiltrated buffering porous Al2O3 as the hybrid interfacial hole-transporting layer

Supplementary files

Article information

Article type
Paper
Submitted
18 5月 2016
Accepted
04 7月 2016
First published
05 7月 2016

Phys. Chem. Chem. Phys., 2016,18, 27083-27089

An efficient perovskite solar cell with symmetrical Zn(II) phthalocyanine infiltrated buffering porous Al2O3 as the hybrid interfacial hole-transporting layer

P. Gao, K. T. Cho, A. Abate, G. Grancini, P. Y. Reddy, M. Srivasu, M. Adachi, A. Suzuki, K. Tsuchimoto, M. Grätzel and M. K. Nazeeruddin, Phys. Chem. Chem. Phys., 2016, 18, 27083 DOI: 10.1039/C6CP03396B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements