Issue 27, 2011

Rechargeable alkali-ion cathode-flow battery

Abstract

We provide a proof of concept of a lithium battery configuration containing an aqueous cathode in a flow-through mode. A room-temperature, rechargeable alkali-ion battery with a commercially available Li+-ion solid–electrolyte separating a Li0 anode and an organic liquid–carbonate electrolyte on one side and, on the other, an aqueous cathode containing 0.1 M K3Fe(CN)6 has been demonstrated to give high efficiency electrical energy storage at 3.40 V; it is capable of matching the capacity of the Li0 anode if operated with the aqueous cathode in a flow-through mode. The resistance of the solid electrolyte rather than the flow rate of the cathode determined the power density of the test cell. The concept can be used with a more-abundant Na0 anode and a Na+-ion solid electrolyte. The results call for the development of an alkali-ion solid–electrolyte separator with a smaller resistance.

Graphical abstract: Rechargeable alkali-ion cathode-flow battery

Article information

Article type
Paper
Submitted
03 12月 2010
Accepted
20 1月 2011
First published
21 2月 2011

J. Mater. Chem., 2011,21, 10113-10117

Rechargeable alkali-ion cathode-flow battery

Y. Lu and J. B. Goodenough, J. Mater. Chem., 2011, 21, 10113 DOI: 10.1039/C0JM04222F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements