Issue 8, 2024

Employing a similar acceptor material as the third component to enhance the performance of organic solar cells

Abstract

We synthesized two derivatives of Y6, namely Y-TNF and Y-TN. Compared to Y6, these two derivatives possess fluorinated and non-fluorinated extended terminal groups, respectively. Y-TNF exhibits a red-shifted absorption compared to Y-TN, a narrower bandgap, and a better matched energy level to the donor material PM6. Hence, Y-TNF demonstrates better photovoltaic performance. The incorporation of Y-TN further enhances the photovoltaic performance of binary PM6:Y-TNF devices due to its good compatibility and intermolecular interactions with Y-TNF, resulting in improved charge transport and reduced non-radiative energy loss. The ternary organic solar cells (OSCs) offer a higher device efficiency of 16.63% with a high open-circuit voltage of 0.857 V, a high short-circuit current density of 25.84 mA cm−2, and a high fill factor of 75.10%. The results show that incorporating a similar acceptor material as the third component is an effective strategy to enhance the performance of OSCs.

Graphical abstract: Employing a similar acceptor material as the third component to enhance the performance of organic solar cells

Supplementary files

Article information

Article type
Paper
Submitted
11 5月 2024
Accepted
19 6月 2024
First published
19 6月 2024
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2024,3, 1948-1955

Employing a similar acceptor material as the third component to enhance the performance of organic solar cells

K. Wang, H. Bai, C. Zhang, C. Sun, S. Sang, Y. Li, Z. Chen, J. Hu, X. Li, L. Meng and Y. Li, Energy Adv., 2024, 3, 1948 DOI: 10.1039/D4YA00304G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements