Issue 1, 2024

Dry reforming of steelworks off-gases in a pilot plant integrated into a steel mill: influence of operating parameters

Abstract

A novel process is applied in a pilot plant integrated within a steel mill in Saarland, Germany, in which the greenhouse gases CO2 and CH4 are converted into synthesis gas, a mixture of H2 and CO, by homogeneous dry reforming. The process is based on heating a gas mixture of coke oven gas (COG) and blast furnace gas (BFG) to high temperatures in a regenerative heat exchanger, similar to the existing hot blast stoves used to heat the hot blast blown into the blast furnace. The resulting synthesis gas can be injected into the blast furnace at the level of the shaft and/or tuyere, reducing coke consumption in iron production, potentially leading to a reduction in global CO2 emissions of about 0.5%. After commissioning, the cyclic operating pilot plant was used to study a wide variation of operating parameters. At a maximum local peak temperature of over 1721 K during the synthesis gas production phase, an average conversion of about 97% for CH4 and over 94% for CO2 was achieved, which is close to the thermodynamic equilibrium of over 99% and about 98%, respectively. The scale-up process is accomplished by modeling and numerical simulation. The measured data obtained from the pilot plant agree well with the numerical simulations using a detailed elementary-step reaction mechanism.

Graphical abstract: Dry reforming of steelworks off-gases in a pilot plant integrated into a steel mill: influence of operating parameters

Supplementary files

Article information

Article type
Paper
Submitted
25 5月 2023
Accepted
22 10月 2023
First published
26 10月 2023
This article is Open Access
Creative Commons BY license

Energy Adv., 2024,3, 123-130

Dry reforming of steelworks off-gases in a pilot plant integrated into a steel mill: influence of operating parameters

P. Blanck, G. Kass, K. P. Kinzel and O. Deutschmann, Energy Adv., 2024, 3, 123 DOI: 10.1039/D3YA00227F

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements