Issue 48, 2023

Charge transfer enhancement at the CZTS photocathode interface using ITO for efficient solar water reduction

Abstract

Cu2ZnSnS4 (CZTS) is considered as one of the most promising photocathodes for photoelectrochemical (PEC) water splitting due to its suitable optoelectronic properties. However, its PEC performance and stability degrade due to the poor interface between buffer layer CdS and catalyst Pt. In this work, indium tin oxide (ITO) was investigated as a charge transfer and protective layer for the CZTS/CdS/Pt photocathode. The solution-processed CZTS thin film coated with a CdS/ITO double layer and Pt catalyst (CZTS/CdS/ITO/Pt) yielded a photocurrent of 29 mA cm−2 at 0 VRHE and an onset potential of 0.75 VRHE, which is significantly higher than that of the pristine CZTS/CdS/Pt photocathode. More importantly, the addition of the ITO layer was found to have a “recovery” effect that enables the CZTS/CdS/ITO/Pt photocathode to remain stable under photo-reducing conditions, as confirmed by dark linear sweep voltammetry runs after a stability test. Our results suggest that the improved photocurrent, onset potential, and recovery effect are probably attributed to the removal of phosphate ions adhering to the surface of the ITO layer and higher catalytic activity at the semiconductor/electrolyte surface by forming In–Pt and Sn–Pt interactions due to partial reduction of In and Sn on the ITO surface.

Graphical abstract: Charge transfer enhancement at the CZTS photocathode interface using ITO for efficient solar water reduction

Supplementary files

Article information

Article type
Paper
Submitted
31 8月 2023
Accepted
06 11月 2023
First published
30 11月 2023

J. Mater. Chem. A, 2023,11, 26543-26550

Charge transfer enhancement at the CZTS photocathode interface using ITO for efficient solar water reduction

Y. F. Tay, M. Zhang, S. Zhang, S. Lie, S. Y. Chiam and L. H. Wong, J. Mater. Chem. A, 2023, 11, 26543 DOI: 10.1039/D3TA05227C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements