Issue 15, 2023

In situ infrared CO detection using silver loaded EMT zeolite films

Abstract

Ag cluster catalyst-based oxidation of CO to CO2 is an important way to remove CO at low temperatures. However, the instability of silver clusters seriously limits the catalytic application. Herein, sub-nanosized EMT zeolite nanoparticles served as Ag cluster carriers with high selectivity, low coordination, and unsaturated atom active sites. The silver clusters with sub-nanometer size can be controlled with different charge states and loading rates. A detection film with 500 nm was further prepared by assembling the Ag-EMT composites with a small amount of Nalco as an adhesive. For CO detection, a completely enclosed gas sensing device based on in situ infrared spectroscopy was employed without air interference. CO was accurately introduced into the detection chamber and catalysed into CO2 by silver loaded EMT zeolite films, and the whole process was accurately recorded by infrared spectroscopy. CO with a detection range of 2–50 ppm was realized, showing great application potential in gas monitoring.

Graphical abstract: In situ infrared CO detection using silver loaded EMT zeolite films

Supplementary files

Article information

Article type
Paper
Submitted
14 4月 2023
Accepted
05 6月 2023
First published
07 7月 2023
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2023,5, 3934-3941

In situ infrared CO detection using silver loaded EMT zeolite films

Y. Wang, H. He, J. Sun, X. Zhang, M. Zulpya, X. Zheng, L. Xu and B. Dong, Nanoscale Adv., 2023, 5, 3934 DOI: 10.1039/D3NA00238A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements