Issue 33, 2020

Low defects density CsPbBr3 single crystals grown by an additive assisted method for gamma-ray detection

Abstract

Metal halide perovskites have arisen as a new family of semiconductors for radiation detectors due to their high stopping power, large and balanced electron–hole mobility-lifetime (μτ) product, and tunable bandgap. Here, we report a simple and low-cost solution processing approach using additive-assisted inverse temperature crystallization (ITC) to grow cesium lead bromide (CsPbBr3) single crystals with low-defect density. Crystals grown from precursor solutions without additives tend to grow fastest along the [002] direction, resulting in crystals shaped as small elongated bars. The addition of choline bromide (CB) proves to mediate the crystallization process to produce large single crystals with a cuboid shape, allowing for more practical fabrication of gamma-ray detectors. This new additive-assisted growth method also improves the resulting crystal quality to yield a reduction in the density of trap states by over one order of magnitude, relative to a crystal grown without CB. The detector fabricated from a CB-assisted solution-grown perovskite CsPbBr3 single crystal is able to acquire an energy spectrum from a cesium-137 (137Cs) source with a resolution of 5.5% at 662 keV.

Graphical abstract: Low defects density CsPbBr3 single crystals grown by an additive assisted method for gamma-ray detection

Supplementary files

Article information

Article type
Communication
Submitted
08 6月 2020
Accepted
05 8月 2020
First published
07 8月 2020

J. Mater. Chem. C, 2020,8, 11360-11368

Author version available

Low defects density CsPbBr3 single crystals grown by an additive assisted method for gamma-ray detection

Y. Feng, L. Pan, H. Wei, Y. Liu, Z. Ni, J. Zhao, P. N. Rudd, L. R. Cao and J. Huang, J. Mater. Chem. C, 2020, 8, 11360 DOI: 10.1039/D0TC02706E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements