Issue 2, 2019

Effect of chloride substitution on interfacial charge transfer processes in MAPbI3 perovskite thin film solar cells: planar versus mesoporous

Abstract

For photovoltaic devices based on hybrid organic–inorganic perovskite thin films, the cell architecture is a vital parameter in defining the macroscopic performance. However, the understanding of the correlation between architecture and carrier dynamics in perovskite thin films has remained elusive. In this work, we utilize concerted materials characterization and optical measurements to investigate the role of chloride addition in PSC devices with two different architectures. Perovskite thin films, prepared with varying ratios of methylammonium halide MACl : MAI (0 : 1, 0.5 : 1, 1 : 1, and 2 : 1), were coated on either planar or mesoporous TiO2/FTO substrates. X-ray diffraction analysis reveals that with increasing the ratio of the Cl precursor, there is an increasing preferential directional growth of the perovskite film in both configurations. Time-resolved photoluminescence spectroscopy was applied to investigate the electron injection dynamics from the photoexcited perovskites to the TiO2. It is found that the interfacial electron injection rate from perovskite to planar TiO2 is accelerated with increasing Cl content, which explains the increased power conversion efficiencies using Cl-modified perovskites as photoactive materials. In contrast, Cl addition demonstrate no discernable influence on electron injection to mesoporous TiO2, suggesting the interfacial charge recombination rather than electron injection give rise to the improved performance observed in the mesoporous configuration. The results presented here, provide a deeper understanding of the mechanism of chloride addition to MAPbI3 solar cells with different architectures.

Graphical abstract: Effect of chloride substitution on interfacial charge transfer processes in MAPbI3 perovskite thin film solar cells: planar versus mesoporous

Supplementary files

Article information

Article type
Paper
Submitted
30 10月 2018
Accepted
15 11月 2018
First published
16 11月 2018
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2019,1, 827-833

Effect of chloride substitution on interfacial charge transfer processes in MAPbI3 perovskite thin film solar cells: planar versus mesoporous

Z. Li, C. Kolodziej, C. McCleese, L. Wang, A. Kovalsky, A. C. Samia, Y. Zhao and C. Burda, Nanoscale Adv., 2019, 1, 827 DOI: 10.1039/C8NA00317C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements