Issue 2, 2019

Porous graphene-coated stainless-steel fiber for direct immersion solid-phase microextraction of polycyclic aromatic hydrocarbons

Abstract

Porous graphene (PG), a type of graphene-based material with some holes/pores within the atomic plane, has recently attracted great attention. In this study, PG was prepared by combustion method and used as a new coating on stainless-steel fibers for direct immersion solid-phase microextraction (SPME) of polycyclic aromatic hydrocarbons (PAHs). Compared to polydimethylsiloxane-coated fiber, PG-coated SPME fiber showed higher enrichment factors (EFs), which increased with the number of aromatic rings. The excellent extraction ability was mainly due to the existence of nanopores. Moreover, PG also provided π–π stacking interaction and hydrophobic properties for better extraction efficiency of aromatic compounds. Additionally, PG-coated fibers exhibited good precision (<8%), wide linear ranges (0.002–10 μg L−1), and low limits of detection (1–2 ng L−1) for PAHs. The results verified that this novel PG coating was a promising sorbent for extraction and trace analysis of PAHs in environmental water samples.

Graphical abstract: Porous graphene-coated stainless-steel fiber for direct immersion solid-phase microextraction of polycyclic aromatic hydrocarbons

Supplementary files

Article information

Article type
Paper
Submitted
25 10月 2018
Accepted
02 12月 2018
First published
03 12月 2018

Anal. Methods, 2019,11, 213-218

Porous graphene-coated stainless-steel fiber for direct immersion solid-phase microextraction of polycyclic aromatic hydrocarbons

Y. Huang, J. Chen, Z. Li, L. Wang, M. Guan and H. Qiu, Anal. Methods, 2019, 11, 213 DOI: 10.1039/C8AY02330A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements